Printer Friendly

Oh, those unlucky leaks!


Ever gone on a long trip and run out of gas on the way? It's even worse if you find out that a fuel leak was the cause.

That's why it's important to take a good look at the fuel transfer lines on your Stryker, especially before a long training mission or operation.

Just open the access plate at the rear of the vehicle and check the lines for fuel leaks. If you see any, report 'em! After all, who wants a highly flammable liquid sloshing around under their feet?

Before you reinstall the access plate, take a minute to clean away any dirt or sand that's built up on the recessed lip of the floor plate. That crud can keep the access plate from fastening properly. It'll go flying the next time you hit a big bump!


COPYRIGHT 2011 PS Magazine
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2011 Gale, Cengage Learning. All rights reserved.

Article Details
Printer friendly Cite/link Email Feedback
Title Annotation:Stryker ...
Publication:PS, the Preventive Maintenance Monthly
Article Type:Brief article
Geographic Code:1USA
Date:Jun 1, 2011
Previous Article:Engine gets more studly.
Next Article:Gun tube life ... go figure!

Terms of use | Privacy policy | Copyright © 2018 Farlex, Inc. | Feedback | For webmasters