The safe bet is for a company to manufacture products for which there is already a clearly established market. Fortunately, companies such as Just Right (JR) Carbines aren't interested in playing follow the leader. Instead, they are carving out their own niche in the industry. In JR Carbines' case, it's by offering pistol-caliber AR-15-style carbines.
Pistol-caliber carbines are nothing new. In fact, they've been around since the 19th century. The obvious advantage of such firearms is that they are more easily wielded than longer rifles chambered in more traditional calibers and much lighter recoiling. Thanks to the longer barrel, longer sight radius, cheekweld and shoulder mount, carbines are far more accurate than a handgun chambered for the same cartridge. In addition, the increased velocity generated by the rifle's longer barrel can extend the effective range of the round. Then there's the convenience of being able to shoot the same ammunition from a rifle as from a pistol.
Just Like an AR ... Only Different JR Carbines makes unique firearms in that they offer the user-friendly features and modularity of the AR-15 platform, yet they accept popular Glock, Smith & Wesson M&P or 1911 magazines, depending on how the carbine is configured. JR Carbines are currently offered in 9mm, .40 S&W and .45 ACP. Don't know which to choose? Not to worry. You can easily swap calibers by purchasing a conversion kit.
Southpaws will appreciate that the JR Carbine's bolt can be configured so that spent cases are ejected from the left side of the rifle, as opposed to in their face. The bolt handle can also be mounted on either side of the rifle.
Although the JR Carbine is patterned after the AR, there are a number of differences, including the bolt operation. To cycle the bolt, simply pull the bolt handle rearward and release. To lock the bolt to the rear, pull the bolt rearward and then downward, into the notched bolt catch. Of course, since it fires pistol-caliber bullets, the JR Carbine's magazine is significantly different than the typical 5.56/.223-style AR mag.
Due to the dramatically different magazine well, the JR Carbine's mag release is not accessible to your trigger finger when you're attaining a proper shooting grip. This is the rifle's biggest drawback because it prevents you from reloading it anywhere nearly as efficiently as reloading a standard AR. Of course, you could limit the need for reloading by employing a high-capacity magazine, unless you're in a state such as California where even "standard"-capacity magazines are prohibited by law.
The California-compliant model G&A evaluated was equipped with the dreaded but legally mandated bullet button, located on the left side of the rifle. As the name implies, a tool such as the tip of a bullet or the purpose-built metal plunger that came with the rifle must be used in order to remove the magazine. This feature prevents the mag from being considered "detachable," which--when combined with other standard AR features such as a pistol grip, telescoping stock or flash hider--could classify a centerfire rifle as a so-called "assault weapon."
Similarly, the 15-round 9mm Glock 19 magazine that shipped with my JR Carbine was blocked to only accept 10 rounds in accordance with California state law.
Unlike an AR, which comprises an upper and lower receiver that can be easily disassembled without tools, the JR Carbine's magazine well and firing assembly are secured to the receiver by three takedown screws located on the right side of the rifle. This enables you to easily switch magazine wells, but the tradeoff is that disassembling the carbine for routine cleaning is more of a chore than with an AR-15-platform rifle. In fact, one has to remove the butt-stock assembly to access the bolt. Although this procedure is simple enough, it might cause AR aficionados to groan.
Another significant difference with the JR Carbine is that it relies on a straight blowback operation (like a submachine gun) rather than direct-impingement (Dl) or piston operation, as is typical of the AR. Straight blowback is a simple, reliable operation in which the spent casing is forced rearward by expanding gas created when fired. As the bolt moves rearward, the casing is extracted and ejected. Continued rearward movement cocks the hammer and compresses the buffer spring, which then sends the bolt forward, feeding and chambering another round. With traditional AR-15-platform rifles, the bolt is locked into place by locking lugs, and the cartridges are of relatively high pressure, rendering straight blowback operation impractical.
A Familiar Face Despite its unique characteristics, the JR Carbine will seem like an old friend. It is compatible with standard AR furniture, so customization options are virtually limitless.
The model we tested donned an American-flag pattern and a midlength quad rail housing a 17-inch, button-rifled, 1:16-inch-twist barrel with a 1/2x28 threaded muzzle for the mounting of a muzzlebrake or suppressor. The Picatinny rail atop the receiver facilitates the mounting of optics such as the BSA red dot sight, which arrived with our sample.
The rifle is a handy 6 1/2 pounds. The M4-style telescoping stock can make the overall length between 30 1/4 and 33 1/2 inches, based on shooter preference.
The JR Carbine's A2 grip enables the shooter to easily manipulate the AR-15-style selector switch and access the standard semiautomatic AR trigger, which tested cleanly at about 6 1/2 pounds.
The receiver, trigger housing and magazine well are machined from aerospace-grade 6061 T-6 aluminum in New York State. This was a New York SAFE Act-compliant model with a fixed, "Sporter"-style stock; a nonthreaded 17-inch barrel; and a reduced-capacity Glock-compatible magazine.
Trigger Time Given its patriotic water transfer, this JR Carbine got quite a few stares when it was uncased at the range. Settled at the bench, we hoped the rifle would prove worthy of the American badassery the Stars and Stripes intrinsically exudes. We have to admit, we were impressed with the way the rifle performed.
Although a red dot or iron sights would be an appropriate paring with an AR-15-style pistol-caliber carbine, we replaced the supplied BSA sight for overkill at 50 yards. The accuracy-extracting scope was in the form of a Bushnell Elite Tactical DMR 3.5-21x50mm.
The JR Carbine was rather quiet, and the recoil was surprisingly light. What really surprised us was how accurate it was (with the scope, of course). The 115-grain Federal Range Target Practice ammo produced a 1.20-inch best five-shot group and an average group size of 1.71 inches. That may not seem impressive by rifle standards, but try doing that with a pistol.
The midweight 124-grain Pierce Performance ammo didn't fare quite as well. Groups widened considerably, with the best measuring 2.32 inches and the average a lackluster 4.45 inches.
The Winchester 147-grain PDX1 Defender was the star, with the best group of the day. It measured a respectable 1.15 inches. The average group size with this heavyweight cartridge measured 1.42 inches.
Admittedly, we assumed that the JR Carbine might be a little finicky, but it ran without so much as a hiccup. If it had malfunctioned, we probably would have written off the rifle as just a novelty. However, since it was reliable and produced more than fighting-effective accuracy, G&A is convinced that, in addition to being fun to shoot, the JR Carbine is a legitimate home defense option. It's also a great platform to instill a sense of confidence in a new shooter, as evidenced by an impromptu experiment we conducted at the range.
We coaxed a somewhat-reluctant woman to give the JR Carbine a try. Not surprisingly, after a few shots she commented that there was very little recoil. She was all smiles when she realized how easily she could hit her target. For a moment, we thought we might have to wrestle the rifle from her, but she eventually gave it back--empty.
The JR Carbine is an innovative, practical firearm. While it's certainly not a replacement for a handgun or a traditionally chambered AR, it is easier to shoot than a pistol and softer-recoiling than a rifle (not to mention less expensive to shoot).
Our conclusion: What could be cooler than an AR chambered in 9mm that runs on Glock mags? If you're in the market for a pistol-caliber carbine, give the trendsetters at Just Right Carbines a look.
PERFORMANCE BULLET AVG. AVG. BEST WEIGHT VEL. GROUP GROUP LOAD (GR.) (FPS) SD ES (N.) (IN.) Federal Range Target 115 1,369 21 53 1.71 1.20 Practice Pierce Performance 124 1,216 9 23 4.45 2.32 Winchester PDX1 Defender 147 1,105 11 26 1.42 1.15 Notes: Average velocity is determined from five shots across an Oehler 35P chronograph at a distance of approximately 8 feet from the muzzle. Average accuracy is determined from four five-shot groups at 50 yards from a metal bench with a sandbag rest using a Bushnell Elite Tactical DMR 3.5-21 x50mm scope. JUST RIGHT CARBINES 9mm FLAG GUN Type: Blowback operated, semiautomatic Caliber: 9mm Capacity: 10 + 1 rds. Barrel: 17 in., button rifled Overall Length: 33.25 in. (collapsed), 30.5 in. (extended) Weight: 6.5 lbs. Finish: Hardcoat anodized (aluminum surfaces), black oxide (steel surfaces) Grip: A2 Sights: BSA red dot (optional) Trigger: 6.5 lbs. MSRP: $849 Manufacturer: Just Right Carbines 877-778-8452 justrightcarbines.com
|Printer friendly Cite/link Email Feedback|
|Title Annotation:||ROOFHOUSE: JR Carbines 9mm Flag Gun|
|Publication:||Guns & Ammo|
|Date:||Jul 1, 2015|
|Previous Article:||Injection molded bullets: PolyCase is turning bullet manufacturing on its head with a polymer/copper blend and a new twist on terminal ballistics.|
|Next Article:||Sportsman Channel Red Wild+Blue.|