Printer Friendly

New analyzer features serial triggering.

Two optimized ranges of instruments have been introduced based on the company's DPO7000 oscilloscopes. The DPO70000 Series Oscilloscopes are available in three versions: the 4 GHz DPO70404, the 6 GHz DPO70604, and the 8 GHz DPO70804, each with simultaneous 25-GS/s sampling on all four channels. Typically, the scope rise time is 35 ps, jitter noise floor is 400 fs rms, and more than 250,000 waveforms/s can be captured. Standard memory length is 10M per channel.

[ILLUSTRATION OMITTED]

The DSA70000 Digital Serial Analyzer also is available in 4-, 6-, or 8-GHz bandwidths but has 20M memory standard per channel and serial pattern triggering at up to 3.125 Gb/s with 8-b/10-b protocol decoding. These analyzers are intended for work with PCI-Express, SATA, and XAUI where the 8-GHz DSA70804 can capture the fifth harmonic of the highest clock frequency. Features include software clock recovery, RT-Eye[R] Serial Compliance and Analysis Software, and an integrated total jitter measurement capability.

Both instrument series support up to 100M memory per channel. Other features include a 12.1" XGA display, the MyScope[TM] user interface, and Pinpoint[R] A/B triggering. Tektronix, www.rsleads.com/609ee-220

COPYRIGHT 2006 NP Communications, LLC
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2006 Gale, Cengage Learning. All rights reserved.

Article Details
Printer friendly Cite/link Email Feedback
Title Annotation:Product Briefing
Publication:EE-Evaluation Engineering
Date:Sep 1, 2006
Words:195
Previous Article:DMM includes integrated function generator.
Next Article:Calibration source spans 10 Hz to 4 GHz.
Topics:

Terms of use | Privacy policy | Copyright © 2019 Farlex, Inc. | Feedback | For webmasters