Printer Friendly

Mycobacterial aerosols and respiratory disease. (Perspectives).

Environmental opportunistic mycobacteria, including Mycobacterium avium, M. terrae, and the new species M. immunogenum, have been implicated in outbreaks of hypersensitivity pneumonitis or respiratory problems in a wide variety of settings. One common feature of the outbreaks has been exposure to aerosols. Aerosols have been generated from metalworking fluid during machining and grinding operations as well as from indoor swimming pools, hot tubs, and water-damaged buildings. Environmental opportunistic mycobacteria are present in drinking water, resistant to disinfection, able to provoke inflammatory reactions, and readily aerosolized. In all outbreaks, the water sources of the aerosols were disinfected. Disinfection may select for the predominance and growth of mycobacteria. Therefore, mycobacteria may be responsible, in part, for many outbreaks of hypersensitivity pneumonitis and other respiratory problems in the workplace and home.

**********

Hypersensitivity pneumonitis is an occupational hazard of workers in two different industries, automobile manufacturing (e.g., metal working) and leisure (e.g., indoor swimming pools). Pulmonary illness and infection have also been a consequence of exposure to aerosols generated by hot tubs, spas, and coolant baths. Respiratory problems have also been associated with exposure to water-damaged buildings during reconstruction, and mycobacteria isolated from materials from such buildings have been shown to provoke inflammatory reactions. The outbreaks share the common feature of aerosol exposure and respiratory illness. I propose that exposure to aerosols containing mycobacteria is a common feature of the outbreaks and that mycobacteria or their products could be responsible for the respiratory symptoms.

Epidemiologic studies have established that the workers in such outbreaks were exposed to aerosols generated in the workplace from water that was either a work tool (e.g., metalworking fluid) or an integral part of the workplace or household (e.g., swimming pools and hot tubs) (1-7). Outbreaks of respiratory disease occurred in spite of disinfectant treatment of the waters or fluids to reduce the number of microorganisms. Living or working in water-damaged buildings or as a consequence of reconstruction of water-damaged buildings has also been associated with outbreaks of respiratory problems (8,9). Respiratory disease has been associated with mycobacteria in reservoirs, aerosols, or structural material in a number of cases (2,3,6,7,9).

Hypersensitivity Pneumonitis in Workers Exposed to Metalworking Fluid

An estimated 1.2 million workers in the United States are exposed to aerosols generated by metal grinding (10). Metalworking fluids are widely used in a variety of common industrial metal-grinding operations to lubricate and cool the tool and the working surface. Metalworking fluids are oil-water emulsions that contain paraffins, pine oils, polycyclic aromatic hydrocarbons, and heavy metals (10,11). Exposure to metalworking fluid aerosols can lead to hypersensitivity pneumonitis and chronic obstructive pulmonary disease (1,6,12-14). Mycobacteria were recovered significantly more frequently from metalworking fluid samples collected from facilities where hypersensitivity pneumonitis was found: compared to facilities that did not have hypersensitivity pneumonitis (6). In one study, exposure to metalworking fluid mist resulted in hypersensitivity pneumonitis in 10 workers (7). Acid-fast microorganisms identified as mycobacteria were present in the reservoir at [10.sup.7] CFU/mL (7). A mycobacteria in the reservoir was considered to be a likely cause of the hypersensitivity pneumonitis because one patient was infected by a Mycobacterium sp. and had antibodies against the reservoir fluid (7).

Hypersensitivity pneumonitis appeared in spite of disinfection of the metalworking fluid with morpholine, formaldehyde, or quaternary ammonium-based disinfectants (1,6,12,13), and mycobacteria were recovered from the metal working fluid (6,14,15). Mycobacteria are resistant to formaldehyde and quaternary ammonium disinfectants (16) and the heavy metals in metalworking fluids (17). Further, mycobacteria can grow on the organic compounds in metalworking fluid, including the paraffins, pine oils, and polycyclic aromatic hydrocarbons (18,19) and can degrade the disinfectant morpholine (20). Mycobacteria present in the water (21) can likely grow on the organic compounds in metalworking fluids in the absence of competitors after disinfection. Cleaning would not be expected to eradicate mycobacteria because of their ability to form biofilms (21,22). Adding disinfectant and cleaning the reservoir in one facility did not prevent the reappearance of mycobacteria (7 x [10.sup.5] CFU/mL by 2 weeks [7]). Further, disinfectant treatment would likely result in selection of mycobacteria remaining after the cleaning.

Hypersensitivity Pneumonitis in Swimming Pool Attendants

Granulomatous pneumonitis has been reported in lifeguards ("lifeguard lung") who worked at an indoor swimming pool that featured waterfalls and sprays (5). Affected lifeguards with symptoms worked longer hours than unaffected lifeguards (5), which demonstrated a dose-response effect. The waterfalls and sprays increased the number of respirable particles fivefold and the levels of endotoxin eightfold (5). Based on the presence of endotoxin in the aerosol samples, endotoxin exposure was suggested as the cause of the pneumonitis in lifeguards (5). However, subsequent data provided evidence of a possible second factor resulting in hypersensitivity pneumonitis; aerosols containing mycobacteria were shown to cause granulomatous lung disease (4). Others have reported high numbers of mycobacteria in swimming pools and whirlpools (23) and in hot tubs (23,24). Further, amoebae were reported in the indoor swimming pool where lifeguards reported pneumonitis (5). Mycobacteria, including M. avium and M. intracellulare, can survive and grow in phagocytic amoebae (25) and protozoa (26). In fact, M. avium grown in amoebae or protozoa are more virulent (25; Falkinham JO, unpub, data). Mycobacteria are resistant to chlorine (27) and preferentially aerosolized from water (28).

Mycobacterial Disease after Exposure to Aerosols Generated by Hot Tubs

Hypersensitivity pneumonitis and mycobacterial pulmonary disease has been reported after exposure to hot tubs (2,3,24). The mycobacteria isolated (e.g., M. avium) were likely responsible for the infections based on the identity of patient and hot tub mycobacterial isolates by either restriction fragment length polymorphism analysis (24) or multilocus enzyme electrophoresis (2,3). Further, exposure was followed closely by the onset of symptoms, and the extent of symptoms was related to the length of exposure (i.e., time spent in the hot tub) (2,24). Although these reports do not document the use of disinfectants in the hot tubs, the waters had been heated. Mycobacteria are relatively resistant to high temperature (29) and concentrated in hospital hot water systems (30).

Hypersensitivity Pneumonitis in Occupants of Water-Damaged Buildings

Inflammatory reactions--including eye irritation, respiratory infections, wheeze, bronchitis, and asthma--in workers in water-damaged or "moldy" buildings have been associated with the presence of high numbers of microorganisms (8). Mycobacteria were recovered from materials collected from water-damaged buildings, as well as from microorganisms normally associated with building materials (9). During reconstruction, those mycobacteria could be aerosolized in the dust. Although other microorganisms could be responsible for the respiratory problems, both saprophytic (e.g., M. terrae) and pathogenic (e.g., M. avium) strains isolated from moldy buildings were capable of inducing inflammatory responses in a mouse macrophage cell line (31). The mycobacteria elicited dose-dependent production of cytokines interleukin-6 and tumor necrosis factor-[alpha], nitric oxide, and reactive oxygen species from the murine macrophage (31). Because whole mycobacterial cells were used in the assays (31), whether cell metabolites, which are likely easily aerosolized, were responsible for the induction of inflammatory reactions is not known. Heat-shock proteins from a number of mycobacterial species have been shown to generate Th1-type responses, airway inflammation, and airway hyperresponsiveness (32). This evidence suggests that mycobacteria or their metabolites are possible causes of respiratory disease in persons exposed to water-damaged buildings.

Ecology of Mycobacteria

The unique combination of physiologic characteristics that distinguish the environmental opportunistic mycobacteria make them likely agents for causing respiratory disease in these diverse settings. Mycobacteria are found in a great variety of natural and human-influenced aquatic environments, including treated drinking water (21) and aerosols (33). Mycobacteria in drinking water are associated with the presence of particulates (21). Although these microbes are grown in rich media in the laboratory, they are oligotrophic and capable of substantial growth in low concentrations of organic matter. For example, M. avium and M. intracellulare can grow in natural and drinking water over a temperature range of 10[degrees]C to 45[degrees]C (34). Mycobacteria are relatively resistant to high temperatures. For example, 10% of cells of a strain of M. avium survived after 1 h at 55[degrees]C (29). Mycobacteria are slow growing as a consequence of their fatty acid- and wax-rich impermeable cell wall (35). The resulting cell surface hydrophobicity permits adherence to solid substrates (e.g., pipes and leaves) in aquatic environments, which results in mycobacteria's persistence and resistance to being washed away at high flow rates (21,22). Further, hydrophobicity is undoubtedly associated with the ability of these bacteria to metabolize a wide variety of nonpolar organic compounds (18-20) that are constituents of metal working fluids (15,16).

Resistance of Mycobacteria to Disinfection

Mycobacteria are very resistant to the disinfectants used in water treatment, including chlorine and ozone (27). For example, M. avium is almost 500 times more resistant to chlorine than is Escherichia coli (27). Mycobacteria are also quite resistant to agents used for surface and instrument disinfection, including quaternary ammonium compounds, phenolics, iodophors, and glutaraldehyde (16,22,23,36) and can degrade the disinfectant morpholine (20). Hydrophobicity and impermeability are undoubtedly factors contributing to the disinfection resistance of mycobacteria (35). Chemical or enzymatic removal of surface lipid, while not reducing viability, reduces surface hydrophobicity and alters cell charge (37). Because of their inherent impermeability, mycobacteria grow relatively slowly compared to other bacteria. The slow growth is not necessarily a disadvantage because it correlates with increased resistance to antimicrobial agents (35), including chlorine (Falkinham JO, unpub data).

Exposure of a mixed microbial population to disinfectants results in selection of a disinfectant-resistant or tolerant population (38). The persistence and growth of mycobacteria in drinking water systems (21) are due, in part, to their disinfectant-resistance (27) and ability to grow under oligotrophic conditions (21). Disinfection of swimming pools, therapy pools, and spas or hot tubs with chlorine is expected to kill nonmycobacterial flora and to permit the growth of even the slowly growing mycobacteria in the absence of competitors for nutrients. High temperature would also be expected to result in enrichment of mycobacteria (29,30). Resistance to disinfectants could also lead to the proliferation of mycobacterial populations in metal working fluid and coolants after disinfection (6,12,13).

Aerosolization of Mycobacteria

Although M.. tuberculosis is transmitted between patients through aerosols, little information exists on aerosolization of the environmental opportunistic mycobacteria (e.g., M. avium and M. intracellulare). Patient-to-patient transmission of environmental opportunistic mycobacteria does not occur (39). M. avium and M. intracellulare are readily aerosolized from aqueous suspension (28,33). Transfer of mycobacteria occurs as a result of binding of mycobacterial cells to air bubbles and ejection of water droplets after the air bubbles reach the liquid surface (28). Aerosolization can result in >1,000-fold increase in numbers of viable mycobacterial cells per milliliter of water droplets ejected from water (28). Mycobacteria in natural aerosols are found in particles and droplets (i.e., <5 gm) that can enter the alveoli of the human lung (28,33). Cell surface hydrophobicity, not surface charge, is a major determinant of enrichment in ejected droplets (28). Transfer of mycobacteria from water to air is subject to prevailing physiochemical conditions and can be manipulated. Salts (e.g., NaCl) or detergents reduce the rate of transfer of mycobacteria from water to air by ejected droplets (28). The influence of the components of metalworking fluid or of chlorine or other disinfectants in water upon aerosolization mycobacteria is unknown.

Mycobacteria and Immune Responses and Airway Inflammation

Mycobacterial cells and cellular components provoke inflammatory responses. Cells of mycobacterial strains isolated from material collected from water-damaged buildings provoke inflammatory responses in macrophages (31). Mycobacterial heat-shock proteins generate Th1-type responses, airway inflammation, and hyperresponsiveness (32). The mycolic acid-containing glycolipids, mannose-containing phospholipids, glycopeptidolipid mycosides, phenolglycolipid mycosides, and sulfatides that are unique to mycobacteria have all been reported to stimulate immune responses in animals (40). Further, mycobacteria produce a variety of extracellular primary and secondary metabolites (19) that could be aerosolized and trigger immune responses, including hypersensitivity pneumonitis. Some of these immunostimulatory compounds are produced in response to growth on polycyclic aromatic hydrocarbons (18). Unfortunately, the studies of inflammatory responses provoked by mycobacteria have been limited to whole cells grown under a single condition (31) or single proteins (32). The influence of growth conditions (e.g., growth in metalworking fluid or chlorinated water) or cell fractions (e.g., membranes) or metabolites to stimulate inflammatory responses has not been measured.

Conclusion

Contemporary reviews of airway dysfunction all describe the need for information concerning microbial agents of workplace and household exposure (41). Although many more studies are needed, the evidence points to a role of environmental opportunistic mycobacteria in provoking hypersensitivity pneumonitis, respiratory disease, and respiratory infection in both the workplace and home. In addition to the recovery of identical species and types of mycobacteria from reservoirs and patients, physiologic characteristics of mycobacteria are consistent with their presence in the sources, transmission by means of aerosols, and illnesses. Identifying the factors that influence the presence of mycobacteria in aerosols in these workplaces would have an impact on workers in a variety of occupational settings.

On the basis of several physiologic and ecologic characteristics of mycobacteria, several approaches to reduce the impact of mycobacteria in these settings are possible. Because mycobacteria are associated with particulates (21), their numbers in reservoirs can be reduced by removal of particular matter (e.g., filtration). UV light can be used to reduce mycobacterial numbers. Disinfection of mycobacteria at high temperatures (e.g., 40[degrees]C) is more effective at reducing numbers, especially if cells were grown at lower temperatures (e.g., 30[degrees]C). Agents or combinations with surfactant or detergent-like and disinfiectant activity would increase permeation in cells and biofilms and kill more mycobacteria. Finally, aerosolized or waterborne mycobacteria may be trapped in filters coated with hydrophobic compounds (e.g., paraffin) and thereby intercepted before inhalation or ingestion.

References

(1.) Bernstem DI, Lummus ZL, Santilli G, Siskosky J, Bernstein IL. Machine operator's lung. A hypersensitivity pneumonitis disorder associated with exposure to metalworking fluid aerosols. Chest 1995;1(18:636-41.

(2.) Embil J, Warren P, Yakrus M, Stark R, Corne S, Forrest D. Pulmonary illness associated with exposure to Mycobacterium avium complex in hot tub water: hypersensitivity pneumonitis or infection? Chest 1997;111:813-6.

(3.) Kahana LM, Kay JM, Yakrus M, Waserman S. Mycobacterium avium complex infection in an immunocompetent young adult related to hot tub exposure. Chest 1997;111:242-5.

(4.) Martyny JW, Rose CS. Nontuberculous mycobacterial bioaerosols from indoor warm water sources cause granulomatous lung disease. Indoor Air 1999;9:1-6.

(5.) Rose CS, Martyny JW, Newman LS, Milton DK, Krug TE Jr, Beebe JL, et al. "Lifeguard lung": endemic granulomatous pneumonitis in an indoor swimming pool. Am J Public Health 1998;88:1795-800.

(6.) Shelton BG, Flanders WD, Morris GK. Mycobacterium sp. as a possible cause of hypersensitivity pneumonitis in machine workers. Emerg Infect Dis 1999;5:270-3.

(7.) Muilenberg ML Burge HT, Sweet T. Hypersensitivity pneumonitis and exposure to acid-last bacilli in coolant aerosols. J Allergy Clin Immunol 1998;91:311.

(8.) Brunekreef B. Damp housing and adult respiratory symptoms. Allergy 1992;47:498 502.

(9.) Andersson MA, Nikulin M, Koljalg U, Andersson MC, Rainey F, Reijula K, et al. Bacteria, molds, and toxins in water-damaged building materials. Appl Environ Microbiol 1997;63:387-92.

(10.) Eisen EA, Tolbert PE, Smith TJ, Monson RR, Hallock M, Woskie SR, et al. Mortality studies of machining fluids; an exposure-response analysis of respiratory and digestive cancers. Proceedings of the 9th International Symposium on Epidemiology in Occupational Health, Sept 23-25, 1992, Cincinnati, Ohio. DHHS (NIOSH) pub no. 94-112. Cincinnati (OH): National Institute for Occupational Safety and Health: 1994. p. 113-7.

(11.) Howell JK, Lucke WE, Steigerwald JC. Metalworking fluids: composition and use. The Industrial Metalworking Environment: Assessment and Control (Symposium). Nov. 13-16, 1995. Detroit: Automobile Manufacturers Association; 1996. p. 13-20.

(12.) Centers for Disease Control and Prevention. Biopsy-confirmed hypersensitivity pneumonitis in automobile production workers exposed to metalworking fluids--Michigan, 1994-1995. MMWR Morb Mortal Wkly Rep 1996;45:606-10.

(13.) Centers for Disease Control and Prevention. Respiratory illness in workers exposed to metalworking fluid contaminated with nontuberculous mycobacteria--Ohio, 2001. MMWR Morb Mortal Wkly Rep 2002;51:349-52.

(14.) Wilson, RW, Steingrube VA, Bottger EC, Springer B, Brown-Elliot BA, Vincent V, et al. Mycobacterium Immunogenum sp. nov., a novel species related to Mycobacterium abscessus and associated with clinical disease, pseudo-outbreaks and contaminated metalworking fluids: an international cooperative study on mycobacterial taxonomy. Int J Syst Evol Microbiol 2001;51:1751-64.

(15.) Moore JS, Christensen M, Wilson RW, Wallace RJ Jr, Zhang, Y, Nash DR, et al. Mycobacterial contamination of metal working fluids: involvement of a possible new taxon of rapidly growing mycobacteria. American Industrial Hygiene Association Journal 2000;61:205-13.

(16.) van Klingeren B, Pullen W. Comparative testing of disinfectants against Mycobacterium tuberculosis and Mycobacterium, terrae in a quantitative suspension test. J Hosp Infect 1987;10:29217.

(17.) Falkinham JO III, George KL, Parker BC, Gruft H. In vitro susceptibility of human and environmental isolates of Mycobacterium avium, M. intracellulare, and M. scrofulaceum to heavy-metal salts and oxyanions. Antimicrob Agents Chemother 1984;25:137-9.

(18.) Guerin WF, Jones GE. Mineralization of phenanthrene by a Mycobacterium sp. Appl Environ Microbiol 1988;54:937-44.

(19.) Krulwich TA, Pelliccione NJ. Catabolic pathways of coryneforms, nocardias, and mycobacteria. Annu Rev Microbiol 1979;33:95-111.

(20.) Combourieu B, Besse P, Sancelme M, Veschambre H, Delort AM, Poupin P, et al. Morpholine degradation pathway of Mycobacterium aurum MO1: direct evidence of intermediates by in situ [sup.1]H nuclear magnetic resonance. Appl Environ Microbiol 1998;64:153-8.

(21.) Falkinham JO III, Norton CD, Le Chevallier MW. Factors influencing numbers of Mycobacterium avium, Mycobacterium intracellulare, and other mycobacteria in drinking water distribution systems. Appl Environ Microbiol 2001;67:1225-31.

(22.) Schulze-Robbecke R, Fischeder R. Mycobacteria in biofilms. Zentralblatt fur Hygiene und Unweltmedizin 1989;188:385-90.

(23.) Havelaar AH, Berwald LG, Groothuis DG, Baas JG. Mycobacteria in semi-public swimming pools and whirlpools. Zentralblatt fur Hygiene und Unweltmedizin 1985;180:505-14.

(24.) Mangione EJ, Huitt G, Lenaway D, Beebe J, Bailey A, Figoski M, et al. Nontuberculous mycobacterial disease following hot tub exposure. Emerg Inflect Dis 200177:1039-42.

(25.) Cirillo JD, Falkow S, Tompkins LS, Bermudez LE. Interaction of Mycobacterium avium with environmental amoebae enhances virulence, Infect Immun 1997;65:3759-67.

(26.) Strahl ED, Gillaspy GE, Falkinham JO III. Fluorescent acid-fast microscopy for measuring phagocytosis of Mycobacterium avium. Mycobacterium intracellulare, and Mycobacterium scrofulaceum by Tetrahymena pyriformis and their intracellular growth. Appl Environ Microbiol 2001:67:4432-9.

(27.) Taylor RH, Falkinham JO III, Norton CD, LcChevallier MW. Chlorine, chloramine, chlorine dioxide, and ozone susceptibility of Mycobacterium avium. Appl Environ Microbiol 2000:66:1702-5.

(28.) Parker BC, Ford MA, Gruft H, Falkinham JO III. Epidemiology of infection by nontuberculous mycobacteria. IV. Preferential aerosolization of Mycobacterium intracellulare from natural water. Am Rev Respir Dis 1983;128:652-6.

(29.) Schulze-Robbecke R, Buchholtz K. Heat susceptibility of aquatic mycobacteria. Appl Environ Microbiol 1992;58:1869-73.

(30.) duMoulin GC, Stottmeier KD Pelletier PA, Tsang AY, Hedley-Whyte J. Concentration of Mycobacterium avium by hospital hot water systems. JAMA 1988;260:1599-601.

(31.) Huttunen K, Ruotsalainen M, Iivanainen E, Torkko P, Katila M-L, Hirvonen M-R. Inflammatory responses in RAW264.7 macrophages caused by mycobacteria isolated from moldy houses. Environ Toxicol Pharmacol 2000;8:237-4.

(32.) Rha Y-H, Taube C, Haczku A, Joetham A, Takeda K, Duez C, et al. Effect of microbial heat shock proteins on airway inflammation and hyperresponsiveness. J Immunol 2002;169:5300-7.

(33.) Wendt SL, George KL, Parker BC, Gruft, Falkinham JO III. Epidemiology of infection by nontuberculous mycobacteria. III. Isolation of potentially pathogenic mycobacteria in aerosols. Am Rev, Respir Dis 1980;122:259-63.

(34.) George KL, Parker BC, Gruft H, Falkinham JO III. Epidemiology of infection by nontuberculous mycobacteria. II. Growth and survival in natural waters. Am Rev Respir Dis 1980;122:89-94.

(35.) Brennan PJ, Nikaido H. The envelope of mycobacteria. Annu Rev Biochem 1995;64:29-63.

(36.) Collins FM. Bactericidal activity of alkaline glutaraldehyde solution against a number of atypical mycobacterial species. J Appl Bacteriol 1986;61:247-51.

(37.) George KL, Pringle AT, Falkinham JO III. The cell surface of Mycobacterium avium--intracellulare and M. scrofulaceum: effect of specific chemical modifications on cell surface charge. Microbios 1986;45:199-207.

(38.) Young H-K. Antimicrobial resistance spread in aquatic environments. J Antimicrob Chemothcr 1993;31:627-35.

(39.) Wolinsky E. Nontuberculous mycobacteria and associated diseases. Am Rev Resp Dis 1979;119:107-59.

(40.) Clark-Curtiss JE. Identification of virulence determinants in pathogenic mycobacteria. Curr Top Microbiol Immunol 1998;225:57-121.

(41.) Speizer FE. Occupational and environmental lung diseases: an overview. Environ Health Perspect 2000;108(Suppl 4):603-4.

Address for correspondence: J.O. Falkinham, Fralin Biotechnology Center, West Campus Drive, Virginia Tech, Blacksburg, VA 24061-0346, USA; fax: (540) 231-7126: email:jofiii@vt.edu

Joseph O. Falkinham, III, Virginia Polytechnic Institute and State University, Blacksburg, Virginia, USA

Dr. Falkinham is a professor of microbiology in the Department of Biology at Virginia Polytechnic Institute and State University. His research interests include identifying the genes and physiologic characteristics of Mycobacterium avium that are responsible for its ecology, transmission, and virulence.
COPYRIGHT 2003 U.S. National Center for Infectious Diseases
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2003, Gale Group. All rights reserved. Gale Group is a Thomson Corporation Company.

Article Details
Printer friendly Cite/link Email Feedback
Title Annotation:mycobacteria prevalent in water content of aerosols
Author:Falkinham, Joseph O., III
Publication:Emerging Infectious Diseases
Geographic Code:1USA
Date:Jul 1, 2003
Words:3520
Previous Article:Pablo Picasso (1881-1973). Guernica (1937). Oil on canvas, 350 cm x 782 cm. (Cover Story).
Next Article:Global screening for human viral pathogens. (Perspectives).
Topics:


Related Articles
Lungs hurt most by ozone-acid synergy.
Spray fabric dye linked to pneumonia.
Mycobacterium sp. as a Possible Cause of Hypersensitivity Pneumonitis in Machine Workers.
Emergence of a Unique Group of Necrotizing Mycobacterial Diseases.
Molecular Characterization of Mycobacterium abscessus Strains Isolated from a Hospital Outbreak.
Molecular analysis of sarcoidosis tissues for Mycobacterium species DNA. (Research).
Mycobacterium triplex pulmonary disease in immunocompetent host.
Mycobacteria in nail salon whirlpool footbaths, California.

Terms of use | Privacy policy | Copyright © 2018 Farlex, Inc. | Feedback | For webmasters