Multi-featured counter module for CPX systems.
Once installed, the Counter Module's high I/0, operational mode and parameterization flexibility allows engineers and machine builders to set up sophisticated counting applications with minimal effort. These can be implemented directly on the CPX system with a wide range of plant sensors and actuators far more rapidly than was previously possible.
Festo's CPX platform is a complete automation solution that integrates a wide choice of pneumatic and electrical, analogue and digital I/O. CPX systems configured for specific requirements are delivered pre-built, tested and ready for installation, enabling system integrators to meet tight timeframes and budgets. For additional flexibility, the CPX platform can operate as either a self-contained industrial PLC, or as a local unit on a Fieldbus or Industrial Ethernet-based distributed system. In addition, a wide choice of I/O and connector modules makes interfacing to process sensors and actuators easy.
The CPX Counter Module has two channels, allowing compact and cost-effective solutions for applications with multiple sensors. Each channel accepts most 24V and 5V pulse and single-ended or differential incremental encoders, as well as SSI absolute types; this facilitates a wide range of length, position, speed and angular position measurement applications. A direction signal, or 90[degrees]phase shift inputs, on each channel allow extraction of direction information for incremental encoders. Count continuously, count once and periodic count modes at 24V and 5V levels are supported with pulse count frequencies to one MHz.
Output functions are also well supported; these include configurable 24 V digital, pulse, pulse train, pulse-width modulation (PWM), On/Off control with delay and frequency output to 20kHz. In addition, by pairing the Counter channels 24V DC motors can be controlled.
The Counter Module has features to improve the quality of its results. These include hysteresis to overcome encoder fluctuations, and limit monitoring and diagnostics. For ease of use and added flexibility, parameterisation of each channel for its input and output connections and functionality can be managed via a laptop using Festo's free to download FMT software, as are commissioning and diagnostics.
IP-rated CPX systems using the Counter Module can be mounted directly onto the machine being controlled rather than relegated to a cabinet, as the module can achieve 1P65-rated ingress protection with an optional cover. This allows engineers to design more compact, reliable and cost-effective systems with reduced cabling requirements. The module features Festo's new push-in connection technology, which makes connection to the counters' inputs and outputs quick and easy.