Printer Friendly

Milling Cutter Kit For Tie Plate Machining As Per Dlw Drg No Inkmgm0176.

Tenders are invited for Milling Cutter Kit For Tie Plate Machining As Per Dlw Drg No Inkmgm0176

Quantity: 2.00 Set

Tender Doc. Cost (INR): 1.00

Bidding System: Single Bid System

Inspection Agency: Consignee

Payment Terms: Full Payment After Receipt And Acceptance Of Material.

Instructions/Remarks: 1. Firm Should Agree To Abide By Tender Terms And Conditions. By Having Quoted, It Shall Be Taken For Granted That Bidder Agree To All Terms And Conditions Unless Specifically Brought Out Otherwise In Its Offer. Detailed Tender Conditions Can Be Seen On Homepage Of Website Www.Ireps.Gov.In Under Link E-Tender-Dlw-Cos/Dlw/Documents. 2 Tenderers Are Advised To Read The Special Conditions And Checklist For Bidders Clearly And The Conditions Mentioned Here Will Prevail In Case Of Any Conflict With The Conditions In Tender Documents Or Other Documents Attached With The Tender. 3 Tenderers Are Required To Fill All The Columns Of Offer Form With Due Care And Seriousness. Technical Or Commercial Deviations If Any Are To Be Necessarily Indicated At The Prenominated Column On The Offer Form Under Heading Deviations . Uploaded Documents Should Have Reference At Prenominated Place On The Offer Form Failing To Which Uploaded Documents May Not Be Considered For Evaluation Of The Offer. In Case Any Technical Or Commercial Deviations Are Uploaded As Attachment The Same Should Have Reference At The Prenominated Place On The Offer Form Under Heading Deviation Failing To Which Such Attachments May Not Be Evaluated. 4 Tender Documents Cost And Emd Is Waived Off.

Tender Closing Date Time: 05/05/2017 10:00

Delivery Schedule: Within 02 Months.

Major organization : DIESEL LOCOMOTIVE WORKS

Address : Varanasi - 221004,

State : Uttar Pradesh,

Attn. : S P Piplani, Controller of Stores

Country :India

Email :

Url :

Tender notice number : 051781341

Notice type : Tender Notice

Open date : 2017-05-05

Tender documents : T38788555.html

[c] 2017 Al Bawaba ( Provided by SyndiGate Media Inc. ( ).

COPYRIGHT 2017 SyndiGate Media Inc.
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2017 Gale, Cengage Learning. All rights reserved.

Article Details
Printer friendly Cite/link Email Feedback
Publication:Mena Report
Date:Apr 7, 2017
Previous Article:White Clad Steel Tape 1/2 Inch Wide 10 Feet Long (3 Mtrs) With Mm And Inch. Complete Die Cast Steel Case (indian Make) Similar To Freeman Brand.
Next Article:Complete Filter Cubicles Along With All Equipments And Cabling. P/0/0212 C And D No/stock No.t021/000 Abb Drg./Clw Drg./Spec....

Terms of use | Privacy policy | Copyright © 2018 Farlex, Inc. | Feedback | For webmasters