Printer Friendly

Microwave-Assisted Synthesis and Characterization of [[Rh.sub.2][(OAc).sub.4][(L).sub.2]] Paddlewheel Complexes: A Joint Experimental and Computational Study.

1. Introduction

Rhodium complexes are one of the most important, versatile, and useful catalysts in organic synthesis. Their well-known reactivity has been exploited by catalytic or stoichiometric selective bond activation and C-C bond coupling reactions [1-5]. Wilkinson's complex is a milestone largely used in decarbonylation or in olefin hydrogenation reactions [6-8]. In this regard, the rhodium acetate complex [[Rh.sub.2][(OAc).sub.4]], I, has been recognized as (i) a valuable, stable, and easy-to-handle catalyst; and (ii) a linker in the synthesis of inorganic polymers and cages, II and III, respectively (Figure 1) [9-13]. The number of reports involving I in the fields of biochemistry [14-17], catalysis [18-20], and bioorganometallic [21,22], inorganic [23-26], and organometallic chemistry [27-29] has been increased to an average of sixty papers per year in the last decade (according to SciFinder at 03-01-2017).

Early, in 1973, Paulissen et al. reported the insertion reaction of a carbenoid species, generated in situ from ethyl-diazoacetate, into O-H bonds catalyzed by I, under soft conditions [30]. Later, the works independently published by Hubert et al. among others showed the use of complex I as a catalyst for the cyclopropanation of olefins and allylic activation by diazo-esters [19, 20, 27-29, 31-39].

Furthermore, I and analogous complexes have been used as catalysts in the alkyne cyclopropanation or hydrophosphinylation reactions [40,41], with concomitant mechanistic studies addressed to understand the role of the tetrabridged species in the catalytic process [41-45]. In the last decade, a work by Pirrung et al. showed that the chiral rhodium dimmer, IV (Figure 1), can be easily synthesized and used as a catalyst for the enantioselective addition of ethyl-diazoacetate to terminal acetylenes [46-48]. In 2007, Gois and Jang groups reported, respectively, that the binuclear Rh(II) complex, V, containing N-Heterocyclic Carbenes (NHC) as auxiliary ligands, can be a profitable tool in (i) the arylation of aldehydes and (ii) the allylic oxidation reaction [49, 50]. Recently, Werle et al. reported that acetate rhodium derivatives like compound VI can be useful carbene transfer reagents [51].

On the other hand, the hydroamination (HA) of alkynes catalyzed by transition metal complexes is an important reaction, which involves the C-N bond formation. Based on the properties of the catalyst, this reaction can afford either the Markovnikov or anti-Markovnikov products (Figure 2) [52-58]. Furthermore, a few Rh species have been reported as excellent catalysts for this process [59-63]. However, to the best of our knowledge, complex I has not yet been reported as a catalytic precursor for this reaction. Therefore, we were initially motivated to investigate about the reactivity of I as a catalyst for the HA reaction, although we obtained the double ligand-insertion products into the binuclear Rh(II) complex which were not exactly as it was reported previously for this kind of complexes. Herein, we report about the characterization with different spectroscopic techniques and their reactivity as well as a computational study to rationalize our findings.

2. Results and Discussion

2.1. Attempts to Obtain the Hydroamination Products. Our first step was addressed to obtain the HA product from the reaction between phenylacetylene (PA) with the corresponding aromatic amine bearing electron donor and electron withdrawing groups, using (I) as catalyst, under microwave (mw) irradiation. Unexpectedly, an untreatable brown oil is obtained as the main product (Table 1, entries 1-4). The proton NMR spectrum of the reaction crude suggests that the formation of the desired hydroamination products, HA1 or HA2, does not take place. Instead, multiple signals are observed from 7.5 to 6.7 ppm, which are assigned to aromatic protons, attributed to the formation of oligo- and polyphenylacetylene (PPA) species, with a concomitant complete consumption of PA. Similar results have been reported using other rhodium mononuclear complexes as catalytic species [59-63]. At the same time, free amine is observed and quantitatively recovered.

On the other hand, when [[Rh.sub.2][(OAc).sub.4]], PA, or the aromatic amine was not added in three independent entries, it clearly affected the reaction pathway; the formation of PPA was not detected, recovering instead the quantitative reactants (Table 1, entries 5-9). Interestingly, when a drop of amine is added as an additive into the reaction mixture in a polar solvent as DMF, we observed a quantitative consumption of PA with a subsequent formation of PPA (Table 1, entry 10).

2.2. Synthesis and Characterization of Rh(II) Paddlewheel Complexes 1-4. On the other hand, after workup of each catalytic attempt, a colorful green-violet solid is obtained which was attributed to the formation of an adduct species with formula [[Rh.sub.2][(OAc).sub.4][(L).sub.2]], 1-4, (L = N[H.sub.2]Ar; Ar = Ms [2,4,6-tri-([C[H.sub.3])-[C.sub.6][H.sub.2]] 1, Dipp [2,6-di-([(C[H.sub.3]).sub.2]CH)-[C.sub.6][H.sub.3]] 2, Couma [Coumarin] 3), respectively (Figure 3). Additionally, coumarin could also be used in the reaction as a ligand itself, resulting in the formation of complex 4. All of the compounds were isolated as deep purple-green solids in quantitative yields.

The structure of complexes 1-4 is based on the 1D and 2D NMR spectroscopy analysis. Thus, the proton NMR spectrum of compound 1 shows a singlet signal at 6.87 ppm, which was attributed to the aromatic protons, in accordance with the three singlet signals observed at 2.37 and 2.24 ppm, assigned to the methyl groups of the Ms substituents, and at 1.63 ppm corresponding to the OAc ligands (2:1:2 ratio). The amine protons were assigned to abroad signal observed at 5.42 ppm. [sup.13]C{[sup.1]H} NMR spectrum showed a singlet signal at 190.9 ppm which was assigned to the carbonyl groups. In the aromatic region, four signals from 138.6 to 125.4 ppm were attributed to the aromatic carbons. Furthermore, the signals observed at 20.6 and 17.6 ppm were assigned to the carbon atoms of the methyl groups of the mesityl substituents and the peak at 23.7 ppm belongs to the acetate fragments. The IR spectrum showed two vibration bands at 3372 and 3308 [cm.sup.-1] assigned to the N[H.sub.2] functional group (Table 2). Additionally, in the UV/Vis spectrum, a maximum absorption longitude was found at 283 nm attributed to a ligand-metal charge transference transition [64-66]. Compounds 2-4 showed similar spectroscopic characteristics so they will not be discussed. Selected data are summarized in Table 2. Finally, the structure of 1-2 and 4 was corroborated by X-ray diffraction analysis.

2.3. X-Ray Structural Analysis of Complexes 1-2 and 4. The adducts of rhodium acetate, containing a nitrogen donor ligand as pyridine, picoline, and aniline derivatives, were reported earlier [23, 66, 67]. Complexes 1-2 crystallized in a space group P-1, while complex 4 crystallized in a P 21/c one. The 1-2 and 4 binuclear core showed a Rh-Rh bond distance in an expected range of 2.3925(6), 2.3886(5), and 2.3860(6) A, respectively (see Figures 5(a)-7(a) and Table 3) [68-70]. These facts show that the oxygen donor atom has slightly compressed the Rh-Rh bond distance in 0.065 A, which is 0.025 [Angstrom] less than in the Rh-N core. Furthermore, a strong n-n stacking interaction was found in compound 4 with a distance of 3.403 A among the coumarin rings (Figure 7(b)) [71-75]. It is possible that the natural bulkiness of either methyl or isopropyl groups in the complexes 1-2 was clearly enough to affect the unit cell packing with a concurrent missing of the [pi]-[pi] stacking interaction. Thus, a near interaction was found between the aryl groups at 7.793 and 7.972 A, Figures 6(b) and 7(b), respectively. Finally, the N[H.sub.2] Ar ligand adopted a transoid geometry arrangement around the Rh-Rh core.

2.4. ESI-MS, MS/MS, and Cyclic Voltammetry (CV) of Compound 1. Recently, ESI-MS and MS/MS spectrometry have shown their relevance in understanding the stability, reactivity, and selective bond activation of different [[Rh.sub.2][(OAc).sub.4][(L).sub.2]] transition metal complexes [76-80]. The ESI-MS(+) spectrum of compound 1 shows the expected signal at m/z 713.0798, which was attributed to the protonated molecule; the same spectrum contains a fragment ion at m/z 577.9757, formed by the loss of one aniline group suggesting a formation of [[[Rh.sub.2][(OAc).sub.4](L)].sup.+] molecular ion. The MS/MS fragmentation pattern of the two above ions is presented in Figure 8. As can be observed, these same fragments are present in both MS/MS spectra; all of them are assigned to the loss of one or more acetate groups.

Figure 9 shows cyclic voltammograms of a solution of compound 1 in dimethylsulfoxide (DMSO) and LiCl as supporting electrolyte; tests were carried out at a scan rate of 10-100 mV/s. Both curves show obvious electrochemical response over the glass carbon electrode. Also it is possible to distinguish some anodic signal at -0.08V and the rest of line is the same. Anodic signals were assigned, respectively, according to their donor and acceptor groups; and the cathodic process is attributed to a reduction process. Thus, at a scan rate of 10 to 100mV/s, the values of Ep,a and Ep,c linearly increase with v and v1/2, respectively, in good according with analogous species [81-83].

2.5. Computational Analysis of the Preference of Ligation in Rhodium (II) Paddlewheel Complexes. As we mentioned above, Gois et al. reported the synthesis of the binuclear NHC complex with the formula [[Rh.sub.2][(OAc).sub.4](NHC)], which is an excellent catalytic precursor into the aldehyde arylation reaction [49]. However, under our experimental conditions, the isolation of complexes of the type [[Rh.sub.2][(OAc).sub.4](L)] (1'-4') did not take place. Instead, the quantitative formation of [[Rh.sub.2][(OAc).sub.4][(L).sub.2]] (1-4) complexes is observed (Figure 4). At this point, we faced the following question: what is the driven force that allows us to obtain only species 1-4? In order to answer this, we carried out theoretical calculations at the DFT-M06-L level for obtaining reaction energies and comparing them with the other reported complexes (gasphase geometry optimizations were done at the M06-L/(6-311G,LANL08) level. Solvent effects were added later using standard parameters for toluene. See Supporting Information for further details on the computational methodology used in this work). Therefore, we have analyzed both cases: (i) having one and (ii) two auxiliary ligands linked to the [[Rh.sub.2][(OAc).sub.4]] core.

Our results are summarized in Table 4. All of the insertion reactions that lead to the formation of monocoordinate complexes 1'-4' are highly exothermic, following the next sequence: N[H.sub.2]Dip (2') > N[H.sub.2]Mes (1') > N[H.sub.2] Couma (3') > Coumarin (4') with the reaction energies of -27.4, -25.7, -25.6 and -17.7 kcalx[mol.sup.-1], respectively. Furthermore, the second insertion reaction that produces complexes 1-4 is still exothermically favored, following the same sequence as the previous one (-22.5, -21.1, -18.1, and -12.2kcalx[mol.sup.-1], resp.). Our calculations agree with the experimental results. So, the binuclear complex I has a high affinity for binding to two auxiliary ligands. In the case of Gibbs free energy values (AG%), we can observe that complex 1 is a species also favored by entropic effects. All these thermodynamic data suggest that it is possible to incorporate one ligand, but under such conditions, stopping the reaction is not possible (to only obtain 1'-4'). Moreover, in order to shed more light into the formation of complexes 1-4, we have used an energy decomposition analysis [84, 85] for the reaction energy ([DELTA][E.sub.Rxn]) according to the following equation:

[DELTA][E.sub.Rxn] = [E.sub.Bond] + [E.sub.Def]. (1)

Thus [DELTA][E.sub.Rxn] is the energy difference between relaxed fragments and the total complex. This energy can be decomposed into [E.sub.Bond] (the same energy difference but for the non-optimized geometry of the fragments) and [E.sub.Def] (the energy necessary to deform the original geometry of the reactants when isolated to the geometry they adopt in the product).

This way, we can compare the strength of the L [right arrow] M bond. In all cases, the addition of a first ligand L is energetically more favored than the addition of the second one to the binuclear Rh complex. However, by analyzing [E.sub.Def], we can see that, for ligands N[H.sub.2]Dip and N[H.sub.2]Mes, the deformation is larger when the first ligand is inserted. Now, by considering the addition of a second ligand, the [[Rh.sub.2][(OAc).sub.4](L)] and L fragments are slightly deformed for 1 and 2 (-0.3 and 0.2 kcal x [mol.sup.-1], resp.), whereas for N[H.sub.2] coumarin, 3, a similar energy is required for incorporating either the first or the second ligand. When L = coumarin, Gibbs free energy values are larger when adding the second ligand than when adding the first one, where the coumarin ligand is the only one that binds to a rhodium through an oxygen atom. So probably in the competition between the coumarin oxygen and oxygens from acetate groups lies the fact that this ligand is less favored, because of a [pi]-conflict, for being bound to the binuclear Rh(II) complex. Moreover, we have also calculated the binuclear NHC complexes with the formula [[Rh.sub.2][(OAc).sub.4](L)] (L = IDip, V;L = SIDip, Va) and [[Rh.sub.2][(OAc).sub.4][(L).sub.2]] (L = IDip, V'; L = SIDip, Va') (for comparison with that reported by Gois et al. [49] see Table S1 in Supplementary Material available online at We presume that similar conclusions would be drawn for analogous complexes. These reactions are noticeably more exothermic (by almost the double of energy) than those reported herein. Although the value of the reaction energy of the first ligation is almost twice that for the second ligation, the reaction should be continued until the addition of the second ligand NHC. The calculated energy reaction to form complex V is -53.6 kcalx[mol.sup.-1] whereas the energy reaction for the second ligand addition in Va is -31.5 kcalx[mol.sup.-1]. We believe that the use of conventional heating or microwaves is the difference between obtaining binuclear complexes with one ligand and the reaction going further until the incorporation of the second ligand.

3. Conclusions

In summary, we report herein the synthesis and characterization of four paddlewheel rhodium complexes, 1-4, assisted by microwave irradiation under laboratory atmosphere in quantitative yields. An X-ray diffraction study shows a slight interaction between amine (N[H.sub.2]Ar) and carbonyl (coumarin) ligands inside the Rh-Rh bond core. Additionally, a well-defined [pi]-[pi] stacking interaction is found in 4. However, the natural bulkiness of the N[H.sub.2]Ar auxiliary ligands avoids this interaction in species 1-2. The ESI-MS spectrum shows that 1 can form mono-, di-, and triprotonated ionic species, 1a-b. Later, a tandem MS study was carried out on the 1a ion, which showed the formation of at least two molecular ions attributed to 1a-H+ and 1a'-H. The attempts to obtain the hydroamination products of the reaction of PA and the corresponding aromatic amines catalysed by I were unfruitful under our established conditions. Finally, a DFT study reveals that the formation of 1-4 is thermodynamically favoured with respect to a tentative isolation of the monosubstituted products 1'-4' because of the use of mw conditions.

4. Experimental

4.1. General: Materials and Methods. [[Rh.sub.2][(OAc).sub.4]] was purchased from Chemical Pressure Co. and used as received. Coumarin, phenylacetylene, and the corresponding amines were acquired from Sigma-Aldrich. All other chemicals, filter aids, and chromatographic materials were reagent grade and were used as received. [sup.1]H and [sup.13]C{[sup.1]H} NMR spectra were measured on a 400 MHz Bruker Advance III or 500 MHz Bruker Ultra-Shield instrument (See Supporting Information). A model maXis impact ESI-QTOFMS equipped with Data Analyzer 4.1 (Bruker Daltonics) was used to resolution mass spectra by direct infusion (3 [micro]L/min). ESI was operated in positive mode with ion spray voltage 4500 V, drying gas 4L/min, drying temperature 180[degrees] C, and nebulizing gas pressure 0.5 bar (nitrogen). Spectra were acquired in the m/z range 80-1500. Elemental analysis occurred with a Varian Micro Cube instrument from Elementary. IR spectra were acquired in a Bruker Tensor 27 spectrophotometer (KBr pellet, 99% of purity). Molting points were undertaken in a Fisher-Johns apparatus. CEM microwave reactor was used for the synthesis of rhodium complexes. UV-Visible spectra were acquired in Shimadzu UV-2401PC model spectrophotometer. CV experiments were carried out using a galvanostat potentiostat BioLogic 250, model: VSP s/n: 1355, power: 110-240 Vac 50/60 Hz, Fuses: 5 AF, Pmax: 300 W. X-ray data were obtained on an Oxford Diffraction Gemini A diffractometer with a CCD area detector, and the CrysAlisPro and CrysAlis RED software packages were used for data collection and data integration [86, 87]; collected data were corrected for absorbance by using analytical numeric absorption correction using a multifaceted crystal model based on expressions upon the Laue symmetry using equivalent reflections [87]. The structures were solved using SHELXS-9721 and refined by full-matrix least-squares on F2 with SHELXL-97.22 Weighted R factors, Rw, and all goodness-of-fit indicators, S, were based on F2. The observed criterion of (F2 > 2[sigma]F2) was used only for calculating the R factors. All nonhydrogen atoms were refined with anisotropic thermal parameters in the final cycles of refinement. Hydrogen atoms were placed in idealized positions, with C-H distances of 0.93 and 0.98 [Angstrom] for aromatic and saturated carbon atoms, respectively. The isotropic thermal parameters of the hydrogen atoms were assigned the values of [U.sub.iso] = 1.2 times the thermal parameters of the parent nonhydrogen atom. A summary of crystallographic data is presented in Table 3.

4.2. Synthetic Procedures

General Method. A mw tube was charged with a mixture of [[Rh.sub.2][(OAc).sub.4]] (0.1 g, 0.22 mmol), toluene (2mL), and the corresponding ligands (0.45 mmol). The mixture was irradiated under mw at 110[degrees]C, 150 W and 0.5 h.

Complex 1. Anal. Cal. for [C.sub.26][H.sub.38][N.sub.2][O.sub.8][Rh.sub.2] ([M.sub.W] 712.4 g [mol.sup.-1]) C, 43.83; H, 5.38; N, 3.93. Found: C, 43.3; H, 5.3; N, 3.8. M.p. 301[degrees]C. IR (KBr pellet, [cm.sup.-1]): 3372, 3308 (N-H, [H.sub.2]NAr), 3018 (CH, Ar), 1594 (C-O, OAc). UV/Vis ([lambda] nm, [epsilon] [M.sup.-1] [cm.sup.-1]): 283 (36786). [sup.1]H NMR (500 MHz, CD[Cl.sub.3], 25[degrees]C): 6.87 (s, 2H, C[H.sub.m]), 5.42 (b.s., 2H, N[H.sub.2]), 2.37 (s, 6H, C[H.sub.3], [Ar.sub.o]), 2.24 (s, 3H, C[H.sub.3], [Ar.sub.p]), 1.63 (OC[H.sub.3]) ppm. [sup.13]C NMR (125 MHz, CD[Cl.sub.3], 25[degrees]C): 190.9 (C=O), 138.6 ([C.sub.Ar]-N[H.sub.2]), 130.0 ([C.sub.q]), 129.0 (CH, [Ar.sub.m]), 125.4 ([C.sub.q]), 20.6 (C[H.sub.3], [Ar.sub.p]), 17.6 (CH3, [Ar.sub.o]), 23.7 (OC[H.sub.3]) ppm. ESI-MS (+, m/z): 713.0798.

Complex 2. Anal. Cal. For [C.sub.32][H.sub.50][N.sub.2][O.sub.8][Rh.sub.2] ([M.sub.W] 796.56 g [mol.sup.-1]): C, 48.25; H, 6.33; N, 3.52. Found: C, 48.1, H, 6.3, N, 3.7. M.p. 304[degrees]C. IR (KBr pellet, [cm.sup.-1]): 3402, 3334 ([H.sub.2]N-Ar). UV/Vis ([lambda] nm, [epsilon] [M.sup.-1] [cm.sup.-1]): 274 (20331). [sup.1]H NMR (500 MHz, CD[Cl.sub.3], 25[degrees]C): 7.17 (d, 2H, CH, [sup.3][J.sub.H-H] = 7.1 Hz); 7.05 (t, 1H, CH, [sup.3][J.sub.H-H] = 7.0 Hz); 5.90 (b.s., 2H, N[H.sub.2]); 3.48 [(sept, 2H, CH(C[H.sub.3]).sub.2],[J.sub./H-H] = 3.4 Hz); 1.80 (OC[H.sub.3]); 1.31 (d, 12H, C[H.sub.3], [sup.3][J.sub.H-H] = 3.4 Hz). 13C NMR (125 MHz, CD[Cl.sub.3], 25[degrees]C): 190.6 (C=O); 138.2 ([C.sub.Ar]-N[H.sub.2]); 136.6 ([C.sub.Ar]-iPr); 126.0 (C[H.sub.m]); 121.7 ([CH.sub.p]); 27.0 (CH[(C[H.sub.3]).sub.2]); 23.2 (CH[(C[H.sub.3]).sub.2]); 23.6 (OC[H.sub.3]).

Complex 3. Anal. Calc. for [C.sub.26][H.sub.26][N.sub.2][O.sub.12][Rh.sub.2] (Mw 764.3 g [mol.sup.-1]) C, 40.86; H, 3.43; N, 3.67. Found: C, 40.7; H, 3.5; N, 3.6. M.p. 307[degrees]C. IR (KBr pellet, [cm.sup.-1]): 3346, 3275 ([H.sub.2]N-Ar). UV/Vis ([lambda] nm, [epsilon] [M.sup.-1] [cm.sup.-1]): 298 (36785). [sup.1]HNMR (500 MHz, C[D.sub.3]CN, 25[degrees]C): 7.69 (d, 1H, C[H.sub.b], [sup.3][J.sub.H-H] = 7.6 Hz); 7.08 (d, IH, C[H.sub.f],[sup.3][J.sub.H-H] = 7.0 Hz); 6.88 (m, 1H, C[H.sub.e], [sup.3][J.sub.H-H] = 6.8 Hz) 6.77 (d, H, C[H.sub.c], [sup.3][J.sub.H-H] = 6.7 Hz); 6.29 (d, H, C[H.sub.a], [sup.3][J.sub.H-H] = 6.2 Hz); 4.27 (b.s., 2H, N[H.sub.2]); 1.76 (OC[H.sub.3]). [sup.13]C NMR (125 MHz, CD3CN, 25[degrees]C): 208.7 (O-C=O); 192.1 (C=O); 147.5 ([C.sub.q], CAr); 145.8 ([C.sub.q]-N[H.sub.2]); 141.7 ([C.sub.b], CH); 122.3 (Cf, CH); 120.0 ([C.sub.q], CAr); 116.6 ([C.sub.c], CH); 116.5 ([C.sub.a], CH); 23.5 (OC[H.sub.3]).

Complex 4. Anal. Cal. For [C.sub.26][H.sub.24][O.sub.12][Rh.sub.2] (Mw 734.27 g[mo.sup.l-1]). C, 42.53; H, 3.29. Found: C, 42.5; H, 3.2. M.p. 300[degrees]C. IR (KBr pellet, [cm.sup.-1]): 1669, 1590 (C=O). UV/Vis ([lambda] nm, [epsilon] [M.sup.-1] [cm.sup.-1]): 370 (119602). [sup.1]H NMR (500 MHz, C[D.sub.3]CN, 25[degrees]C): 7.86 (d, 1H, C[H.sub.b], [sup.3][J.sub.H-H] = 7.87 Hz); 7.61 (d, 1H, C[H.sub.c], Ar, [sup.3][J.sub.H-H] = 7.61Hz); 7.34 (t, 1H, C[H.sub.e], Ar, [sup.3][J.sub.H-H] = 7.32 Hz); 7.32 (m, H, C[H.sub.e], [sup.3][J.sub.H-H] = 6.88 Hz); 6.39 (d, 1H, CHa, [sup.3][J.sub.H-H] = 6.39 Hz); 1.79 (OCH3). [sup.13]C NMR (125 MHz, C[D.sub.3]CN, 25[degrees]C): 205.5 (O-C=O); 190.6 (C=O); 153.0 ([C.sub.q]); 149.0 ([C.sub.b], CH); 137.1 ([C.sub.f], CH); 133.5 ([C.sub.e], CH); 129.8 (Cc, CH); 129.6 ([C.sub.d], CH); 126.4 ([C.sub.q]); 121.7 (Ca, CH); 21.6 (OC[H.sub.3]).

Conflicts of Interest

The authors declare that they have no conflicts of interest.


The authors gratefully acknowledge the support of the SEPPROMEP through Grant no. UGTO-PT-270 (O.S.), Universidad de Guanajuato via DAIP 2013-190 (OS), and Laboratorio Nacional UG-CONACYT (Project no. 123732).


[1] E. B. Boyar and S. D. Robinson, "Rhodium(II) carboxylates," Coordination Chemistry Reviews, vol. 50, no. 1-2, pp. 109-208, 1983.

[2] K. Fagnou and M. Lautens, "Rhodium-catalyzedcarbon-carbon bond forming reactions of organometallic compounds," Chemical Reviews, vol. 103, no. 1, pp. 169-196, 2003.

[3] J. Schwartz, "Alkane activation by oxide-bound organorhodium complexes," Accounts of Chemical Research, vol. 18, no. 10, pp. 302-308, 1985.

[4] E. Lindner, S. Pautz, and M. Haustein, "Dynamic, reactivity and catalytic behavior of pseudo-undercoordinated ruthenium and rhodium complexes stabilized by intramolecular solvents," Coordination Chemistry Reviews, vol. 155, pp. 145-162,1996.

[5] H. M. L. Davies, "Asymmetric synthesis using rhodium-stabilized vinylcarbenoid intermediates," Aldrichimica Acta, vol. 30, no. 4, pp. 107-114,1997.

[6] J. A. Osborn, F. H. Jardine, J. F. Young, and G. Wilkinson, "The preparation and properties of tris(triphenylphosphine)halogenorhodium(I) and some reactions thereof including catalytic homogeneous hydrogenation ofolefins and acetylenes and their derivatives," Journal of the Chemical Society A, pp. 1711-1732, 1966.

[7] F. Y. Kwong, L. Qiu, W. H. Lam, and A. S. C. Chan, "Recent developments in asymmetric hydrogenation of C=O motif compounds," Advances in Organic Synthesis, vol. 1, no. 1, pp. 261-299, 2005.

[8] W. S. Knowles, "Asymmetric hydrogenations (Nobel Lecture 2001)," Advanced Synthesis & Catalysis, vol. 345, no. 1-2, pp. 3-13, 2003.

[9] F. P. Pruchnik, "Structure and reactivity of rhodium(II) complexes," Pure and Applied Chemistry, vol. 61, no. 5, pp. 795-804, 1989.

[10] F. A. Cotton, C. Lin, and C. A. Murillo, "Supramolecular arrays based on dimetal building units," Accounts of Chemical Research, vol. 34, no. 10, pp. 759-771, 2001.

[11] R. P. Bonar-Law, J. F. Bickley, C. Femoni, and A. Steiner, "Dirhodium(n) carboxylates as building blocks. Macrocyclic dimers with vertically stacked Rh24+ units," Journal of the Chemical Society, Dalton Transactions, no. 23, pp. 4244-4246, 2000.

[12] R. P. Bonar-Law, T. D. McGrath, J. F. Bickley, C. Femoni, and A. Steiner, "Dirhodium(II) carboxylate complexes as building blocks. Synthesis of dimeric species as connectors for macrocycles," Inorganic Chemistry Communications, vol. 4, no. 1, pp. 16-18, 2001.

[13] W.-M. Xue, F. E. Kuhn, and E. Herdtweck, "Polymers with a backbone consisting of bimetallic tetracarboxylates and organometallic rhenium(1) complexes: synthesis, characterization, and structural examination," Polyhedron, vol. 20, no. 9-10, pp. 791-798, 2001.

[14] L. J. Boerner and J. M. Zaleski, "Metal complex-DNA interactions: from transcription inhibition to photoactivated cleavage," Current Opinion in Chemical Biology, vol. 9, no. 2, pp. 135-144, 2005.

[15] A. Erck, L. Rainen, J. Whileyman, I.-M. Chang, A. P. Kimball, and J. Bear, "Studies of Rhodium(II) Carboxylates as Potential Antitumor Agents," Proceedings of the Society for Experimental Biology and Medicine, vol. 145, no. 4, pp. 1278-1283, 1974.

[16] P. M. Bradley, P. K. Fu, and C. Turro, "Excited state properties of Rh2[([O.sub.2] CC[H.sub.3]).sub.4]: solution photochemistry and photoinitiated DNA cleavage," Comments on Inorganic Chemistry, vol. 22, no. 6, pp. 393-426, 2001.

[17] J. D. Aguirre, D. A. Lutterman, A. M. Angeles-Boza, K. R. Dunbar, and C. Turro, "Effect of axial coordination on the electronic structure and biological activity of dirhodium(II,II) complexes," Inorganic Chemistry, vol. 46, no. 18, pp. 7494-7502, 2007.

[18] B. C. Hui, W. K. Teo, and G. L. Rempel, "Activation of hydrogen by bridged transition metal carboxylates. Rhodium(II) acetate catalyzed hydrogenation of olefins," Inorganic Chemistry, vol. 12, no. 4, pp. 757-762, 1973.

[19] A. J. Hubert, A. F. Noels, A. J. Anciaux, and P. Teyssie, "Rhodium(II) carboxylates: novel highly efficient catalysts for the cyclopropanation of alkenes with alkyl diazoacetates," Synthesis, vol. 1976, no. 9, pp. 600-602, 1976.

[20] M. F. Sellin, P. B. Webb, and D. J. Cole-Hamilton, "Continuous flow homogeneous catalysis: hydroformylation of alkenes in supercritical fluid-ionic liquid biphasic mixtures," Chemical Communications, no. 8, pp. 781-782, 2001.

[21] G. Pneumatikakis and N. Hadjiliadis, "Interactions of tetrakis-[mu]-acetato-dirhodmm(II) with adenine nucleosides and nucleotides," Journal of the Chemical Society, Dalton Transactions, no. 4, pp. 596-599, 1979.

[22] J. R. Rubin and M. Sundaralingam, "Crosslinking of tRNAs by the carcinostatic agent dirhodium tetraacetate," Journal of Biomolecular Structure and Dynamics, vol. 2, no. 3, pp. 525-530, 1984.

[23] F. A. Cotton and T. R. Felthouse, "Seven dinuclear rhodium(II) complexes with o-oxypyridine anions as ligands," Inorganic Chemistry, vol. 20, no. 2, pp. 584-600, 1981.

[24] F. A. Cotton, K. R. Dunbar, and M. G. Verbruggen, "New directions in the chemistry of dirhodium(II) compounds," Journal of the American Chemical Society, vol. 109, no. 18, pp. 5498-5506, 1987.

[25] M. A. S. Aquino and D. H. Macartney, "Axial-ligand substitution reactions of dirhodium(II) tetraacetate with phosphines and phosphites in acetonitrile," Inorganic Chemistry, vol. 26, no. 16, pp. 2696-2699, 1987.

[26] K. Aoki and H. Yamazaki, "Stereospecific interactions between tetrakis(.mu.-carboxylato)dirhodium antitumor agents and nucleic acid bases. Crystal structure of the rhodium complex [Rh2(acetato)4(AAMP).3.5H2O] (AAMP = 4-amino-5(aminomethyl)-2-methylpyrimidine)," Journal of the American Chemical Society, vol. 106, no. 12, pp. 3691-3692, 1984.

[27] A. Padwa, D. J. Austin, A. T. Price et al., "Ligand effects on dirhodium(II) carbene reactivities. Highly effective switching between competitive carbenoid transformations," Journal of the American Chemical Society, vol. 115, no. 19, pp. 8669-8680, 1993.

[28] C. T. Eagle, D. G. Farrar, C. U. Pfaff, J. A. Davies, C. Kluwe, and L. Miller, "rc-Back-bonding in Bis(isonitrile) complexes of rhodium(II) acetate: structural analogs for rhodium carbenoids," Organometallics, vol. 17, no. 20, pp. 4523-4526, 1998.

[29] S. Miah, A. M. Z. Slawin, C. J. Moody et al., "Ligand effects in the rhodium(II) catalysed reactions of diazoamides and diazoimides," Tetrahedron, vol. 52, no. 7, pp. 2489-2514, 1996.

[30] R. Paulissen, H. Reimlinger, E. Hayez, A. J. Hubert, and P. Teyssiee, "Transition metal catalysed reactions of diazocompounds--II insertion in the hydroxylic bond," Tetrahedron Letters, vol. 14, no. 24, pp. 2233-2236, 1973.

[31] A. J. Anciaux, A. J. Hubert, A. F. Noels, N. Petiniot, and P. Teyssiee, "Transition-metal-catalyzed reactions of diazo compounds. 1. Cyclopropanation of double bonds," Journal of Organic Chemistry, vol. 45, no. 4, pp. 695-702, 1980.

[32] D. A. Evans, M. T. Bilodeau, and M. M. Faul, "Development of the copper-catalyzed olefin aziridination reaction," Journal of the American Chemical Society, vol. 116, no. 7, pp. 2742-2753, 1994.

[33] N. Petiniot, A. J. Anciaux, A. F. Noels, A. J. Hubert, and P. Teyssie, "Rhodium catalysed cyclopropenation of acetylenes," Tetrahedron Letters, vol. 19, no. 14, pp. 1239-1242, 1978.

[34] H. M. L. Davies and K. R. Romines, "Direct synthesis of furans by 3 + 2 cycloadditions between rhodium(II) acetate stabilized carbenoids and acetylenes," Tetrahedron, vol. 44, no. 11, pp. 3343-3348, 1988.

[35] P. Panne and J. M. Fox, "Rh-catalyzed intermolecular reactions of alkynes with [alpha]-diazoesters that possess [beta]-hydrogens: ligand-based control over divergent pathways," Journal of the American Chemical Society, vol. 129, no. 1, pp. 22-23, 2007.

[36] Z. Zhang, J. Han, and S. Zhu, "Facile synthesis of novel C[F.sub.3]-substituted ring-fused furo[2,3-c]pyrazoles through [Rh.sub.2][(OAc).sub.4] catalyzed [3+2] cycloaddition of 4-diazo-1-phenyl3-(trifluoromethyl)-1H-pyrazol-5(4H)-one with aromatic alkynes," Tetrahedron, vol. 67, no. 44, pp. 8496-8501, 2011.

[37] W. Pang, S. Zhu, Y. Xin, H. Jiang, and S. Zhu, "[Rh.sub.2][(OAc).sub.4] catalyzed formation of fluorine-containing polysubstituted furans from diazocompounds and aromatic alkynes," Tetrahedron, vol. 66, no. 6, pp. 1261-1266, 2010.

[38] S. Zhu, L. Chen, C. Wang et al., "A practical system to synthesize the multiple-substituted 2,5-dihydrofuran by the intermolecular dipolar cycloaddition reactions involving acceptor/acceptor-substituted diazo reagents," Tetrahedron, vol. 67, no. 30, pp. 5507-5515, 2011.

[39] B. Zhanga and A. G. H. Wee, "Conformational, steric and electronic effects on the site- and chemoselectivity of the metal-catalyzed reaction of N-bis(trimethylsilyl)methyl, N-(2indolyl)methyl a-diazoamides," Organic & Biomolecular Chemistry, vol. 10, pp. 4597-4608, 2012.

[40] T. R. Hoye and C. J. Dinsmore, "Rhodium(II) acetate catalyzed alkyne insertion reactions of.alpha.-diazo ketones: mechanistic inferences," Journal of the American Chemical Society, vol. 113, no. 11, pp. 4343-4345,1991.

[41] L.-B. Han, C.-Q. Zhao, and M. Tanaka, "Rhodium-catalyzed regio- and stereoselective addition of diphenylphosphine oxide to alkynes," The Journal of Organic Chemistry, vol. 66, no. 17, pp. 5929-5932, 2001.

[42] D. T. Nowlan III and D. A. Singleton, "Mechanism and origin of enantioselectivity in the [Rh.sub.2](OAc)[(DPTI).sub.3]-catalyzed cyclopropenation of alkynes," Journal of the American Chemical Society, vol. 127, no. 17, pp. 6190-6191, 2005.

[43] M. P. Doyle, W. H. Tamblyn, and V. Bagheri, "Highly effective catalytic methods for ylide generation from diazo compounds. Mechanism of the rhodium- and copper-catalyzed reactions with allylic compounds," Journal of Organic Chemistry, vol. 46, no. 25, pp. 5094-5102, 1981.

[44] E. E. Schultz, V. N. G. Lindsay, and R. Sarpong, "Expedient synthesis of fused azepine derivatives using a sequential rhodium(II)-catalyzed cyclopropanation/1-aza-cope rearrangement of dienyltriazoles," Angewandte Chemie--International Edition, vol. 53, no. 37, pp. 9904-9908, 2014.

[45] M. P. Doyle, L. J. Westrum, W. N. E. Wolthuis et al., "Electronic and steric control in carbon-hydrogen insertion reactions of diazoacetoacetates catalyzed by dirhodium(II) carboxylates and carboxamides," Journal of the American Chemical Society, vol. 115, no. 3, pp. 958-964, 1993.

[46] M. C. Pirrung and A. T. Morehead Jr., "Electronic effects in dirhodium(II) carboxylates. Linear free energy relationships in catalyzed decompositions of diazo compounds and CO and isonitrile complexation," Journal of the American Chemical Society, vol. 116, no. 20, pp. 8991-9000, 1994.

[47] Y. Lou, M. Horikawa, R. A. Kloster, N. A. Hawryluk, and E. J. Corey, "A new chiral Rh(II) catalyst for enantioselective [2 + 1]-cycloaddition. Mechanistic implications and applications," Journal of the American Chemical Society, vol. 126, no. 29, pp. 8916-8918, 2004.

[48] Y. Lou, T. P. Remarchuk, and E. J. Corey, "Catalysis of enantios-elective [2+1]-cycloaddition reaction of ethyl diazoacetate and terminal acetylenes using mixed-ligand complex of the series [Rh.sub.2][(RC[O.sub.2]).sub.n]([L*.sub.4-n]) steriochemical heuristics for ligand exchange and catalyst synthesis," Journal of the American Chemical Society, vol. 127, p. 14223, 2005.

[49] P. M. P. Gois, A. F. Trindade, L. F. Veiros et al., "Tuning the reactivity of Dirhodium(II) complexes with axial Nheterocyclic carbene ligands: the arylation of aldehydes," Angewandte Chemie International Edition, vol. 46, no. 30, pp. 5750-5753, 2007.

[50] S. J. Na, B. Y. Lee, N.-N. Bui, S.-I. Mho, and H.-Y. Jang, "A new dirhodium tetraacetate carbenoid: synthesis, crystal structure and catalytic application," Journal of Organometallic Chemistry, vol. 692, no. 24, pp. 5523-5527, 2007.

[51] C. Werle, R. Goddard, and A. Furstner, "The first crystal structure of a reactive dirhodium carbene complex and a versatile method for the preparation of gold carbenes by rhodium-to-gold transmetalation," Angewandte Chemie International Edition, vol. 54, no. 51, pp. 15452-15456, 2015.

[52] S. M. Coman and V. I. Parvulescu, "Nonprecious metals catalyzing hydroamination and C-N coupling reactions," Organic Process Research and Development, vol. 19, no. 10, pp. 1327-1355, 2015.

[53] T. E. Muller, K. C. Hultzsch, M. Yus, F. Foubelo, and M. Tada, "Hydroamination: direct addition of amines to alkenes and alkynes," Chemical Reviews, vol. 108, no. 9, pp. 3795-3892, 2008.

[54] L. Huang, M. Arndt, K. Goofien, L. J. Goossen, and H. Heydt, "Late transition metal-catalyzed hydroamination and hydroamidation," Chemical Reviews, vol. 115, no. 7, pp. 2596-2697, 2015.

[55] N. T. Patil and V. Singh, "Alkyne hydroamination triggered cyclizations: A powerful tool for the construction of biologically important structural motifs," Journal of Organometallic Chemistry, vol. 696, no. 1, pp. 419-432, 2011.

[56] R. Severin and S. Doye, "The catalytic hydroamination of alkynes," Chemical Society Reviews, vol. 36, no. 9, pp. 1407-1420, 2007.

[57] S. Hong and T. J. Marks, "Organolanthanide-catalyzed hydroamination," Accounts of Chemical Research, vol. 37, no. 9, pp. 673-686, 2004.

[58] X.-F. Wu, X. Fang, L. Wu, R. Jackstell, H. Neumann, and M. Beller, "Transition-metal-catalyzed carbonylation reactions of olefins and alkynes: a personal account," Accounts of Chemical Research, vol. 47, no. 4, pp. 1041-1053, 2014.

[59] S. Burling, L. D. Field, and B. A. Messerle, "Hydroamination of Alkynes Catalyzed by a Cationic Rhodium(I) Complex," Organometallics, vol. 19, no. 1, pp. 87-90, 2000.

[60] C. G. Hartung, A. Tillack, H. Trauthwein, and M. Beller, "A convenient rhodium-catalyzed intermolecular hydroamination procedure for terminal alkynes," Journal of Organic Chemistry, vol. 66, no. 19, pp. 6339-6343, 2001.

[61] S. Burling, L. D. Field, B. A. Messerle, and P. Turner, "Intramolecular hydroamination catalyzed by cationic rhodium and iridium complexes with bidentate nitrogen-donor ligands," Organometallics, vol. 23, no. 8, pp. 1714-1721, 2004.

[62] Y. Fukumoto, H. Asai, M. Shimizu, and N. Chatani, "Anti-markovnikov addition of both primary and secondary amines to terminal alkynes catalyzed by the TpRh[([C.sub.2][H.sub.4]).sub.2]/[PPh.sub.3] system," Journal of the American Chemical Society, vol. 129, no. 45, pp. 13792-13793, 2007.

[63] E. Kumaran and W. K. Leong, "[[Cp*Rh[Cl.sub.2]].sub.2]-catalyzed alkyne hydroamination to 1,2-dihydroqmnolines," Organometallics, vol. 34, no. 9, pp. 1779-1782, 2015.

[64] Q. Ye, X. Li, Y. Jin et al., "Synthesis, crystal structures and catalytic activity of tetrakis(acetato)dirhodium(II) complexes with axial picoline ligands," Inorganica Chimica Acta, vol. 434, pp. 113-120, 2015.

[65] F. P. Pruchnik, R. Starosta, M. W. Kowalska et al., "Molecular structure and properties of the rhodium(II) complexes with chemilabile ether-phosphineligands P(2-MeOC6H4)3 and P[(2,6-[(MeO).sub.2][C.sub.6][H.sub.3]).sub.3]," Journal of Organometallic Chemistry, vol. 597, no. 1-2, pp. 20-28, 2000.

[66] J. Jazwinski, "Studies on adducts of rhodium(II) tetraacetate and rhodium(II) tetratrifluoroacetate with some amines in CD[Cl.sub.3] solution using [sup.1]H, [sup.13]C and [sup.15]N NMR," Journal of Molecular Structure, vol. 750, no. 1-3, pp. 7-17, 2005.

[67] A. Leniak, B. Kamieneski, and J. Jazewineski, "Oligomeric complexes of some heteroaromatic ligands and aromatic diamines with rhodium and molybdenum tetracarboxylates: [sup.13]C and [sup.15]N CPMAS NMR and density functional theory studies," Magnetic Resonance in Chemistry, vol. 53, no. 5, pp. 344-352, 2015.

[68] C. T. Eagle, D. G. Farrar, C. U. Pfaff, J. A. Davies, C. Kluwe, and L. Miller, "[pi]-back-bonding in Bis(isonitrile) complexes of rhodium(II) acetate: structural analogs for rhodium carbenoids," Organometallics, vol. 17, no. 20, pp. 4523-4526, 1998.

[69] J. Wolf, R. Poli, J.-H. Xie et al., "Removalofmetal-metal bonding in a dimetallic paddlewheel complex: molecular and electronic structure of bis(phenyl) dirhodium(III) carboxamidate compounds," Organometallics, vol. 27, no. 22, pp. 5836-5845, 2008.

[70] R. S. Lifsey, X. Q. Lin, M. Y. Chavan, M. Q. Ahsan, K. M. Kadish, and J. L. Bear, "Reaction of rhodium(II) acetate with N-phenylacetamide: substitution products and geometric isomers," Inorganic Chemistry, vol. 26, no. 6, pp. 830-836, 1987.

[71] A. Poater, S. Moradell, E. Pinilla et al., "A trinuclear Pt(II) compound with short Pt-Pt-Pt contacts. An analysis of the influence of re-re stacking interactions on the strength and length of the [pi]-[pi] bond," Dalton Transactions, vol. 6, no. 9, pp. 1188-1196, 2006.

[72] H. Imahori, T. Umeyama, K. Kurotobi, and Y. Takano, "Self-assembling porphyrins and phthalocyanines for photoinduced charge separation and charge transport," Chemical Communications, vol. 48, no. 34, pp. 4032-4045, 2012.

[73] Z. Shen, T. Wang, and M. Liu, "H-bond and [pi]-[pi] stacking directed self-assembly of two-component supramolecular nanotubes: tuning length, diameter and wall thickness," Chemical Communications, vol. 50, no. 17, pp. 2096-2099, 2014.

[74] E. H. Krenske and K. N. Houk, "Aromatic interactions as control elements in stereoselective organic reactions," Accounts ofChemical Research, vol. 46, no. 4, pp. 979-989, 2013.

[75] C. R. Martinez and B. L. Iverson, "Rethinking the term 'pistacking'," Chemical Science, vol. 3, no. 7, pp. 2191-2201, 2012.

[76] A. M. Dennis, J. D. Korp, I. Bernal, R. A. Howard, and J. L. Bear, "Crystal and molecular structure of the bis(pyridine) adduct of a dinuclear rhodium(II) complex with trifluoroacetamidato bridging ligands," Inorganic Chemistry, vol. 22, no. 10, pp. 1522-1529, 1983.

[77] M. G. Bartletta, G. M. Haasa, D. A. Bruceb et al., "Characterization of supported and unsupported transition metal compounds by liquid secondary ion mass spectrometry," Analytica Chimica Acta, vol. 346, no. 2, pp. 223-236, 1997.

[78] H. T. Chifotides, J. M. Koomen, M. Kang, S. E. Tichy, K. R. Dunbar, and D. H. Russell, "Binding of DNA purine sites to dirhodium compounds probed by mass spectrometry," Inorganic Chemistry, vol. 43, no. 20, pp. 6177-6187, 2004.

[79] J. Frelek, J. Jazwinski, M. Masnyk, P. Ruekowska, and R. Szmigielski, "Dirhodium tetraacetate as an auxiliary chromophore in a circular dichroic study on vic-amino alcohols," Tetrahedron: Asymmetry, vol. 16, no. 14, pp. 2437-2448, 2005.

[80] J. M. Asara, J. S. Hess, E. Lozada, K. R. Dunbar, and J. Allison, "Evidence for binding of dirhodium bis-acetate units to adjacent GG and AA sites on single-stranded DNA," Journal of the American Chemical Society, vol. 122, no. 1, pp. 8-13, 2000.

[81] N. A. Ezerskaya, E. S. Toropchenova, I. V. Kubrakova et al., "Preparation of binuclear rhodium(II) tetraacetate (initial compound for the coulometric determination of rhodium) under the action of microwave radiation," Journal of Analytical Chemistry, vol. 55, no. 12, pp. 1132-1135, 2000.

[82] J. L. Bear, C.-L. Yao, L.-M. Liu et al., "Synthesis, molecular structure, and electrochemical properties of two geometric isomers of tetrakis(.mu.-2-anilinopyridinato)dirhodium complexes," Inorganic Chemistry, vol. 28, no. 7, pp. 1254-1262, 1989.

[83] R. S. Lifsey, M. Y. Chavan, L. K. Chau, M. Q. Ahsan, K. M. Kadish, and J. L. Bear, "Dirhodium complexes with axially and equatorially nonequivalent rhodium atoms. Characterization of Rh2(tcl)4(tclH) and Rh2(tcl)4(CO) (tcl = [omega]-thiocaprolactamate)," Inorganic Chemistry, vol. 26, no. 6, pp. 822-829, 1987.

[84] G. te Velde, F. M. Bickelhaupt, E. J. Baerends et al., "Chemistry with ADF," Journal of Computational Chemistry, vol. 22, no. 9, pp. 931-967, 2001.

[85] M. von Hopffgarten and G. Frenking, "Energy decomposition analysis," WIREs Computational Molecular Science, vol. 2, no. 1, pp. 43-62, 2012.

[86] G. M. Sheldrick, SHELXS-97, Crystal Structure Solution, University of Gottingen, Gottingen, Germany, 1990.

[87] G. M. Sheldrick, SHELXL-97, Crystal Structure Refinement, University of Gottingen, Gottingen, Germany, 1997.

Oscar F. Gonzalez-Belman, (1) Yazmin Varela, (1) Marcos Flores-Alamo, (2) KazimierzWrobel, (1) Silvia Gutierrez-Granados, (1) Juan M. Peralta-Hernandez, (1) J. Oscar C. Jimenez-Halla, (1) and Oracio Serrano (1)

(1) Departamento de Quimica, Sede Pueblito de Rocha, Division de Ciencias Naturales y Exactas, Universidad de Guanajuato, 36040 Guanajuato, GTO, Mexico

(2) Facultad de Quimica, Ciudad Universitaria, Universidad Nacional Autonoma de Moxico, 04510 Ciudad de Mexico, Mexico

Correspondence should be addressed to J. Oscar C. Jimenez-Halla; and Oracio Serrano;

Received 7 October 2016; Accepted 27 December 2016; Published 19 March 2017

Academic Editor: Stephen Ralph

Caption: Figure 1: Rhodium paddlewheel complexes.

Caption: Figure 2: Alkyne hydroamination catalyzed by transition metals.

Caption: Figure 3: Synthesis of compounds 1-4.

Caption: Figure 4: Sequence of the plausible formation of intermediate complexes 1'-4'.

Caption: Figure 5: (a) ORTEP perspective of compound 1. Selected bond distances ([Angstrom]) and angles ([degrees]). Rh(1)-Rh(1) 2.3925(6), C(1)-N(1) 1.431(4), O(1)-Rh(1) 2.031(2), O(2)-Rh(1) 2.0333(18), O(3)-Rh(1) 2.0450(19), O(4)-Rh(1) 2.0506(18), Rh(1)-O(3) 2.0450(19), Rh(1)-O(4) 2.0506(18), Rh(1)N(1) 2.316(2); C(10)-O(1)-Rh(1) 119.29(18), C(12)-O(2)-Rh(1) 118.62(17), O(1)-Rh(1)-O(2) 90.01(8), O(1)-Rh(1)-N(1) 88.87(8), O(2)-Rh(1)-N(1) 85.02(8). (b) Unit cell of compound 1 (hydrogen atoms where omitted by clarity).

Caption: Figure 6: (a) ORTEP perspective of compound 2. Selected bond distances ([Angstrom]) and angles ([degrees]). Rh(1)-Rh(1) 2.3886(5), O(1)-Rh(1) 2.034(2), O(2)-Rh(1) 2.038(2), O(3)-Rh(1) 2.037(2), O(4)-Rh(1) 2.041(2), Rh(1)-O(2) 2.038(2), Rh(1)-N(1) 2.309(3); C(13)-O(1)-Rh(1) 118.5(2), C(15)-O(3)-Rh(1) 118.2(2), O(1)-Rh(1)-O(3) 90.19(8), O(1)-Rh(1)-O(4) 89.94(9), O(3)-Rh(1)-O(4) 176.42(9), O(1)-Rh(1)-N(1) 87.52(9), O(3)-Rh(1)n(1) 87.88(9), O(4)-Rh(1)-N(1) 95.71(9). (b) Unit cell of compound 2 (hydrogen atoms where omitted by clarity).

Caption: Figure 7: (a) ORTEP perspective of compound 4. Selected bond distances (A) and angles ([degrees]). Rh(1)-Rh(1) 2.386(6), C(1)-O(1) 1.384(4); C(9)-O(2) 1.225(4); C(9)-O(1) 1.371(3); C(12)-O(4) 1.264(4); O(2)-Rh(1) 2.318(2); O(3)-Rh(1) 2.032(2); O(4)-Rh(1) 2.027(2); O(5)- Rh(1) 2.032(2); O(6)-Rh(1) 2.037(2); C(9)-O(2)-Rh(1) 132.6(2), C(10)-O(3)-Rh(1) 118.56(19), C(12)-O(4)-Rh(1) 118.92(19), O(4)-Rh(1)- O(5) 90.74(9), O(3)Rh(1)-O(5) 176.45(8), O(3)-Rh(1)-O(6) 90.22(9), O(5)-Rh(1)-O(2) 89.86(8). (b) Unit cell of compound 4 (hydrogen atoms where omitted by clarity).

Caption: Figure 8: Proposed structures suggested for molecular ions observed by ESI-MS and tandem MS/MS.

Caption: Figure 9: Cyclic voltammograms of a solution of compound 1 under condition: 1 x [10.sup.-3] M (in dmso), at different scan rate (from 10 to 100mV/s), using LiCl as supporting electrolyte. The working electrode was glassy carbon, Ag/AgCl as reference, and Pt as the counter electrode.
Table 1: Attempts to obtain hydroamination products (see
Scheme 1).

Entry (a)      Ar                 [Cat]             Solvent   PPA%

1              Ms       [[Rh.sub.2][(OAc).sub.4]]   Toluene   100
2              Dip      [[Rh.sub.2][(OAc).sub.4]]   Toluene   100
3            Tri-Br     [[Rh.sub.2][(OAc).sub.4]]   Toluene   100
4           Coumarin    [[Rh.sub.2][(OAc).sub.4]]   Toluene   100
5              Ms                 None              Toluene   n.o.
6b             Ms       [[Rh.sub.2][(OAc).sub.4]]   Toluene   n.o.
7b           Tri-Br     [[Rh.sub.2][(OAc).sub.4]]   Toluene   n.o.
8b             Dip      [[Rh.sub.2][(OAc).sub.4]]   Toluene   n.o.
9             None      [[Rh.sub.2][(OAc).sub.4]]   Toluene   n.o.
10          Ms (Drop)   [[Rh.sub.2][(OAc).sub.4]]     DMF     100

(a) A mw tube was charged with HCCPh (0.1 g, lmmol), N[H.sub.2]Ar
(l.lmmol), and [[Rh.sub.2][(OAc).sub.4]] (0.04 g, 0.001 mmol). The
mixture was irradiated under mw at 110[degrees]C, 150W and 0.5 h.
(b) Reaction without HCCPh. n.o. = not obtained.

Table 2: Selected spectroscopic data for complexes 1-4.

Compound                           [sup.1]H

1          6.87 (s, 2H, C[H.sub.m]); 5.42 (b.s., 2H, N[H.sub.2]);
           2.37 (s, 6H, C[H.sub.3], [Ar.sub.o]); 2.24 (s, 3H,
           C[H.sub.3], [Ar.sub.p]); 1.63 (OC[H.sub.3])

2          7.17 (d, 2H, CH, [sup.3][J.sub.H-H] = 7.1 Hz); 7.05 (t,
           1H, CH, [sup.3][J.sub.H-H] = 7.0 Hz); 5.90 (b.s., 2H,
           N[H.sub.2]) 3.48 (sept, 2H,
           CH[(C[H.sub.3]).sub.2],[sup.3][J.sub.H-H] = 3.4 Hz);
           1.80 (OC[H.sub.3]); 1.31 (d, 12H, C[H.sub.3],
           [sup.3][J.sub.H-H] = 3.4 Hz)

3          7.69 (d, 1H, C[H.sub.b], [sup.3][J.sub.H-H] = 7.6 Hz);
           7.08 (d, 1H, C[H.sub.f], [sup.3][J.sub.H-H] = 7.0 Hz);
           6.88 (m, 1H, C[H.sub.e], [sup.3][J.sub.H-H] = 6.8 Hz)
           6.77 (d, H, C[H.sub.a], [sup.3][J.sub.H-H] = 6.7 Hz);
           6.29 (d, H, C[H.sub.a], [sup.3][J.sub.H-H] = 6.2 Hz);
           4.27 (b.s., 2H, N[H.sub.2]); 1.76 (OC[H.sub.3])

4          7.86 (d, 1H, C[H.sub.b], [sup.3][J.sub.H-H] = 7.87 Hz);
           7.61 (d, 1H, C[H.sub.c], Ar, [sup.3][J.sub.H-H] = 7.61
           Hz); 7.34 (t, 1H, C[H.sub.e], Ar, [sup.3][J.sub.H-H] =
           7.32 Hz); 7.32 (m, H, C[H.sub.e], [sup.3][J.sub.H-H] =
           6.88 Hz); 6.39 (d, 1H, C[H.sub.a], [sup.3][J.sub.H-H] =
           6.39 Hz); 1.79 (OC[H.sub.3])

Compound                     [sup.13]C{[sup.1]H}

1          190.9 (C=O); 138.6 ([C.sub.Ar]-N[H.sub.2]); 130.0
           ([C.sub.q]); 129.0 (CH, [Ar.sub.m]); 125.4 ([C.sub.q]);
           20.6 (C[H.sub.3], [Ar.sub.p]); 17.6 (C[H.sub.3],
           [Ar.sub.o]); 23.7 (OC[H.sub.3])

2          190.6 (C=O); 138.2 ([C.sub.Ar]-N[H.sub.2]); 136.6
           ([C.sub.Ar]-iPr); 126.0 (C[H.sub.m]); 121.7
           (C[H.sub.p]); 27.0 ([]H[(C[H.sub.3]).sub.2]); 23.2
           (CH[(C[H.sub.3]).sub.2]); 23.6 (OC[H.sub.3])

3          208.7 (O-C=O); 192.1 (C=O); 147.5 ([C.sub.q],
           [C.sub.Ar]); 145.8 ([C.sub.q]-N[H.sub.2]); 141.7 (Cb,
           CH); 122.3 ([C.sub.f], CH); 120.0 ([C.sub.q],
           [C.sub.Ar]); 116.6 ([C.sub.c], CH); 116.5 ([C.sub.a],
           CH); 23.5 (OC[H.sub.3])

4          205.5 (O-C=O); 190.6 (C=O); 153.0 ([C.sub.q]); 149.0
           ([C.sub.b], CH); 137.1 ([C.sub.f], CH); 133.5
           ([C.sub.e], CH); 129.8 ([C.sub.c], CH); 129.6
           ([C.sub.d], CH); 126.4 ([C.sub.q]); 121.7 ([C.sub.a],
           CH); 21.6 (OC[H.sub.3])

Compound    IR v([cm.sup.-1])    UV/Vis [lambda](nm), [epsilon]

1          3372, 3308 (H2N-Ar)              283, 36786

2          3402, 3334 (H2N-Ar)              274, 20331

3          3346, 3275 (H2N-Ar)              298, 36785

4           1669, 1590 (C=O)               370, 119602

Compound   m.p. ([degrees]C)

1                 301

2                 304

3                 307

4                 300

Table 3: X-ray diffraction selected data for compounds 1-2 and 4.


Chemical formula                       [C.sub.26][H.sub.38]
Formula weight                                 712.4
T [[degrees]K]                                130(2)
[lambda] [[Angstrom]]                         0.71073
Crystal system                               Triclinic
Space group                                     P-1
Unit cell dimensions                 a = 8.0671(11) [Angstrom]
                                   [alpha] = 69.118(9)[degrees]
                                     b = 8.3981(6) [Angstrom]
                                   [beta] = 70.302(11)[degrees]
                                    c = 11.6427(14) [Angstrom]
                                   [gamma] = 89.701(8)[degrees]
V[[[Angstrom].sup.3]]                       687.89(15)
z                                                1
[D.sub.calcd.] [g[cm.sup.-3]]                  1.72
[mu] [[mm.sup.-1]]                             1.25
F(000)                                          362
Goodness-of-fit on F2                          1.054
Final R indices [7 > 2sigma(/)]      R1 = 0.0300, wR2 = 0.0586
R indices (all data)                 R1 = 0.0378, wR2 = 0.0655
Extinction coefficient                          n/a
Chemical formula                       [C.sub.32][H.sub.50]
Formula weight                                796.56
T [[degrees]K]                                130(2)
[lambda] [[Angstrom]]                         0.71073
Crystal system                               Triclinic
Space group                                     P-1
Unit cell dimensions                 a = 8.2014(5) [Angstrom]
                                   [alpha] = 75.975(5)[degrees]
                                     b = 9.2294(6) [Angstrom]
                                    [beta] = 75.919(5)[degrees]
                                     c = 11.9557(7) [Angstrom]
                                   [gamma] = 82.881(5)[degrees]
V[[[Angstrom].sup.3]]                        849.58(9)
z                                                1
[D.sub.calcd.] [g[cm.sup.-3]]                  1.557
[mu] [[mm.sup.-1]]                             1.021
F(000)                                          410
Goodness-of-fit on F2                          1.026
Final R indices [7 > 2sigma(/)]      R1 = 0.0386, wR2 = 0.0541
R indices (all data)                 R1 = 0.0553, wR2 = 0.0647
Extinction coefficient                          n/a
Chemical formula                        [C.sub.26][H.sub.24]
Formula weight                                 734.27
T [[degrees]K]                                 130(2)
[lambda] [[Angstrom]]                         0.71073
Crystal system                               Monoclinic
Space group                                    P 21/c
Unit cell dimensions                  a = 11.616(2) [Angstrom]
                                       [alpha] = 90[degrees]
                                     b = 13.6577(17) [Angstrom]
                                   [beta] = 106.927(18)[degrees]
                                     c = 8.5475(15) [Angstrom]
                                       [gamma] = 90[degrees]
V[[[Angstrom].sup.3]]                        1297.3(4)
z                                                2
[D.sub.calcd.] [g[cm.sup.-3]]                   1.88
[mu] [[mm.sup.-1]]                             1.339
F(000)                                          732
Goodness-of-fit on F2                          1.082
Final R indices [7 > 2sigma(/)]      R1 = 0.0315, wR2 = 0.0609
R indices (all data)                 R1 = 0.0435, wR2 = 0.0674
Extinction coefficient                          n/a

Table 4: Reaction energies and energy decomposition
(kcalx[mol.sup.-1]), calculated at the M06-L-(6-311G, LANL08)
level, for the complexes [[Rh.sub.2][(OAc).sub.4](L)], 1'-4', and
[[Rh.sub.2][(OAc).sub.4][(L).sub.2]], 1-4 according to the following
reactions: [Rh.sub.2][(OAc).sub.4] + L [right arrow]
[[Rh.sub.2][(OAc).sub.4](L)], [[Rh.sub.2][(OAc).sub.4]L] + L [right
arrow] [[Rh.sub.2][(OAc).sub.4][(L).sub.2]].

Complex   [DELTA][H.sup.0.sub.R]   [DELTA][G.sup.0.sub.R]

1'                   -25.7                 -9.9
1                    -21.1                 -12.7
2'                   -27.4                 -11.1
2                    -22.5                 -10.2
3'                   -25.6                 -10.6
3                    -18.1                  -5.3
4'                   -17.7                  -5.4
4                    -12.2                   2.2

Complex   [E.sub.Rxn]   [E.sub.Bond]   [E.sub.Def]

1'          -23.4         -29.2           5.8
1           -16.5         -16.2          -0.3
2'          -24.2         -30.9           6.7
2           -16.6         -16.8           0.2
3'          -22.8         -25.9           3.1
3           -12.2         -14.7           2.5
4'          -16.2         -17.7           1.5
4            -6.9         -10.2           3.3
COPYRIGHT 2017 Hindawi Limited
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2017 Gale, Cengage Learning. All rights reserved.

Article Details
Printer friendly Cite/link Email Feedback
Title Annotation:Research Article
Author:Gonzalez-Belman, Oscar F.; Varela, Yazmin; Flores-Alamo, Marcos; KazimierzWrobel; Gutierrez-Granados
Publication:International Journal of Inorganic Chemistry
Article Type:Report
Date:Jan 1, 2017
Previous Article:Complexing behaviour and antifungal activity of N-[(1E)-1-(1H-benzimidazol-2-yl)ethylidene]morpholine-4-carbothiohydrazide and related ligand with...
Next Article:Five-Coordinate Zinc(II) Complex: Synthesis, Characterization, Molecular Structure, and Antibacterial Activities of Bis-[(E)-2-hydroxy-N'...

Terms of use | Privacy policy | Copyright © 2022 Farlex, Inc. | Feedback | For webmasters |