| Title |
Author |
Type |
Date |
Words |
| Developing Geopolymer Concrete Properties by Using Nanomaterials and Steel Fibers. |
Rabiaa, E.; Mohamed, R.A.S.; Sofi, W.H.; Tawfik, Taher A. |
|
Aug 31, 2020 |
7534 |
| Fatigue Properties Estimation and Life Prediction for Steels under Axial, Torsional, and In-Phase Loading. |
Zhao, Ernian; Zhou, Qiang; Qu, Weilian; Wang, Wenming |
|
May 31, 2020 |
4732 |
| Research on the Dynamic Mechanical Properties and Constitutive Models of Steel Fiber Reinforced Concrete and Polypropylene Fiber Reinforced Concrete. |
Huang, Jie; Zhang, Yi; Tian, Yubin; Xiao, Hengheng; Shi, Jun; Shen, Jiyang; Zhang, Nianlin |
|
Mar 1, 2020 |
7898 |
| Raphanus sativus L. Extract as a Scale and Corrosion Inhibitor for Mild Steel in Tap Water. |
Vasyliev, G.; Vorobyova, V.; Zhuk, T. |
|
Mar 1, 2020 |
5270 |
| Bond Behavior of Epoxy Resin-Polydicyclopentadiene Phase Separated Interpenetrating Networks for Adhering Carbon Fiber Reinforced Polymer to Steel. |
Liu, Meng; Rohde, Brian J.; Krishnamoorti, Ramanan; Robertson, Megan L.; Dawood, Mina |
|
Jan 1, 2020 |
6803 |
| Optimisation of Cutting Tool and Cutting Parameters in Face Milling of Custom 450 through the Taguchi Method. |
Gokce, Harun |
|
Sep 30, 2019 |
6420 |
| A Study on the Improvement of Structural Performance by Glass Fiber-Reinforced Polyurea (GFRPU) Reinforcement. |
Song, Jun-Hyeok; Lee, Eun-Taik; Eun, Hee-Chang |
|
Sep 30, 2019 |
4298 |
| Evaluation of the Methods for Estimating the Fully Reversed Unnotched Fatigue Limits of Steels. |
Li, Jing; Qiu, Yuan-ying; Wang, Hai-dong; Wang, Zhao-xi |
|
Jul 31, 2019 |
5707 |
| Estimating the Tensile Strength of Ultrahigh-Performance Fiber-Reinforced Concrete Beams. |
Yang, In-Hwan; Joh, Changbin; Bui, The Quang |
|
May 31, 2019 |
6108 |
| Microstructure Characteristics of GFRP Reinforcing Bars in Harsh Environment. |
El-Hassan, Hilal; Maaddawy, Tamer El |
|
Apr 30, 2019 |
11527 |
| Effect of Rare Earth Ce on the Microstructure and Mechanical Properties of 34CrNiMo6 Steel for Wind Turbine Main Shaft. |
Ge, Yanming; Wang, Kehong |
|
Apr 30, 2019 |
4472 |
| Flexural Capacity of Steel-Concrete Composite Beams under Hogging Moment. |
Liu, Jing; Ding, Fa-Xing; Liu, Xue-Mei; Yu, Zhi-Wu; Tan, Zhe; Huang, Jun-Wen |
|
Mar 31, 2019 |
6946 |
| Low Cycle Fatigue and Ratcheting Behavior of SA333 Gr-6 Steel at 300[degrees]C Temperature. |
Kumar, Girendra; Kumar, Ashok; Bar, H .N. |
Technical report |
Mar 1, 2019 |
4772 |
| Fatigue Testing of Pipeline Welds and Heat-Affected Zones in Pressurized Hydrogen Gas. |
Drexler, Elizabeth S.; Slifka, Andrew J.; Amaro, Robert L.; Sowards, Jeffrey W.; Connolly, Matthew J |
Technical report |
Jan 1, 2019 |
9101 |
| The Effect of Tempering Temperature on Microstructure and the Mechanical Properties of Forged Steel Containing Chrome, Manganese and Molybdenum. |
Amini, K.; Dayaghi, S.; Yazdanian, S. M.; Beigi, M. T. Seiyed; Gharavi, F. |
|
Nov 1, 2018 |
2521 |
| Optimization of WEDM Cutting Parameters on Surface Roughness of 2379 Steel Using Taguchi Method. |
Jaafar, Noor Azam; Abdullah, Ahmad Baharuddin; Samad, Zahurin |
Report |
Jul 1, 2018 |
4323 |
| Nissan to produce vehicles with steel with a tensile strength of 980 megapascals. |
|
|
Jun 19, 2018 |
116 |
| Auger Analysis of Surface Films formed on the Surface of 18Ni350 Steel during Maraging. |
|
Report |
Apr 30, 2018 |
3169 |
| A Study on Machining Characteristics of KP4 Steel Using Alumina Coated Insert. |
Kim, Jin-Woo; Lee, Seung-Chul |
Report |
Jan 1, 2018 |
3450 |
| Mechanical Properties and Durability of Latex-Modified Fiber-Reinforced Concrete: A Tunnel Liner Application. |
Lee, Joo-Ha; Kim, Hwang-Hee; Park, Sung-Ki; Oh, Ri-On; Kim, Hae-Do; Park, Chan-Gi |
|
Jan 1, 2018 |
5392 |
| Influence of Microalloying Element on the Microstructure and Mechanical Properties of 34CrNiMo6 Steel for Wind Turbine Main Shaft. |
Ge, Yanming; Wang, Kehong |
|
Jan 1, 2018 |
3324 |
| Electrochemical Determination of Hydrogen Entry to HSLA Steel during Pickling. |
Aromaa, Jari; Pehkonen, Antero; Schmachtel, Sonke; Galfi, Istvan; Forsen, Olof |
|
Jan 1, 2018 |
4561 |
| Evaluation of Selected Physicomechanical Properties of SFRC according to Different Standards. |
Komarkova, Tereza; Lanik, Jaromir; Anton, Ondrej |
|
Jan 1, 2018 |
6360 |
| Effect of Deformation Temperature on Microstructure Evolution and Mechanical Properties of Low-Carbon High-Mn Steel. |
Grajcar, Adam; Kozlowska, Aleksandra; Topolska, Santina; Morawiec, Mateusz |
|
Jan 1, 2018 |
3964 |
| Corrosion Behavior of Welded Joint of Q690 with CMT Twin. |
Liu, Peng; Han, Shanguo; Yi, Yaoyong; Yan, Cuixia |
|
Jan 1, 2018 |
5555 |
| Experimental Investigation into Corrosion Effect on Mechanical Properties of High Strength Steel Bars under Dynamic Loadings. |
Chen, Hui; Zhang, Jinjin; Yang, Jin; Ye, Feilong |
|
Jan 1, 2018 |
6588 |
| Mechanical Properties of Steel Fiber-Reinforced Magnesium Phosphate Cement Mortar. |
Feng, Hu; Chen, Gang; Gao, Danying; Zhao, Kunpeng; Zhang, Chong |
|
Jan 1, 2018 |
5969 |
| Mechanical Properties of Steel Fibers and Nanosilica Modified Crumb Rubber Concrete. |
Wang, Yihong; Chen, Jiawei; Gao, Danying; Huang, E. |
|
Jan 1, 2018 |
5661 |
| Using Two-Way Prestressed Semicircular Steel Plate for Construction of Reinforced Concrete Cylinder Column. |
Ren, Zhenhua; Zeng, Xiantao; Sun, Junbo |
|
Jan 1, 2018 |
7643 |
| The Influence of CAM Strategies on the Tool Wear and Surface roughness. |
Zaujec, Rudolf; Vopat, Tomas; Simna, Vladimir; Pokorny, Peter |
Report |
Jan 1, 2018 |
4050 |
| Fatigue Performance Improvements of Wheel Bearing Rolling Elements. |
Rizzo, Sebastiano; Pagliassotto, Stefano |
Report |
Oct 1, 2017 |
2838 |
| Wear behaviour of sintered steels obtained using powder metallurgy method. |
Erden, M.A.; Gunduz, S.; Karabulut, H.; Turkmen, M. |
Report |
Jul 1, 2017 |
4279 |
| Statistical evolution of short fatigue crack growth rate for LZ50 axle steel. |
Yang, B.; Liao, Z.; Ma, B.Q.; Wu, Y.Y.; Xiao, S.N. |
Report |
Mar 1, 2017 |
5714 |
| Bond-Slip Behavior of Basalt Fiber Reinforced Polymer Bar in Concrete Subjected to Simulated Marine Environment: Effects of BFRP Bar Size, Corrosion Age, and Concrete Strength. |
Yang, Yongmin; Li, Zhaoheng; Zhang, Tongsheng; Wei, Jiangxiong; Yu, Qijun |
|
Jan 1, 2017 |
3899 |
| Mechanical Properties of Steel-FRP Composite Bars under Tensile and Compressive Loading. |
Sun, Zeyang; Tang, Yu; Luo, Yunbiao; Wu, Gang; He, Xiaoyuan |
|
Jan 1, 2017 |
5061 |
| Fuel Costs Minimization on a Steel Billet Reheating Furnace Using Genetic Algorithms. |
Santos, Harley S.O.; Almeida, Paulo E.M.; Cardoso, Rodrigo T.N. |
Report |
Jan 1, 2017 |
7421 |
| Autotuning of Isotropic Hardening Constitutive Models on Real Steel Buckling Data with Finite Element Based Multistart Global Optimisation on Parallel Computers. |
Shterenlikht, Anton; Kashani, Mohammad M.; Alexander, Nicholas A.; Williams, Gethin; Crewe, Adam J. |
Report |
Jan 1, 2017 |
7109 |
| Specific Features of Structural-Phase State and Properties of Reactor Pressure Vessel Steel at Elevated Irradiation Temperature. |
Kuleshova, E.A.; Gurovich, B.A.; Krikun, E.V.; Frolov, A.S.; Maltsev, D.A.; Bukina, Z.V.; Saltykov, |
Report |
Jan 1, 2017 |
6463 |
| Stability Analysis of Steel Lining at Pressure Diversion Tunnel Collapse Zone during Operating Period. |
Xiao, Ming; Zhao, Chen |
Report |
Jan 1, 2017 |
8983 |
| The Performance of Structure-Controller Coupled Systems Analysis Using Probabilistic Evaluation and Identification Model Approach. |
Kaloop, Mosbeh R.; Hu, Jong Wan; Bigdeli, Yasser |
Report |
Jan 1, 2017 |
6277 |
| Flexural Behavior of High-Volume Steel Fiber Cementitious Composite Externally Reinforced with Basalt FRP Sheet. |
Kim, Seungwon; Park, Cheolwoo |
Report |
Jan 1, 2017 |
4652 |
| Investigation of the Effects of Submerged Arc Welding Process Parameters on the Mechanical Properties of Pressure Vessel Steel ASTM A283 Grade A. |
Peasura, Prachya |
Report |
Jan 1, 2017 |
3431 |
| Use of Waterjet in Manufacturing Test Bars of High-Strength Steels. |
Jenicek, Stepan; Vratislav, Kotesovec; Kalina, Tomas; Masek, Bohuslav |
Report |
Jan 1, 2017 |
2269 |
| Behavior of Low Grade Steel Fiber Reinforced Concrete Made with Fresh and Recycled Brick Aggregates. |
Islam, Md. Shariful; Siddique, Mohammad Al Amin |
Technical report |
Jan 1, 2017 |
6205 |
| Experimental Research and Finite Element Analysis on Mechanical Property of SFRC T-Beam. |
Sun, Min; Zhu, Jiapeng; Li, Ning; Fu, C.C. |
Technical report |
Jan 1, 2017 |
2681 |
| Experimental study of the plasticity responses of TRIP780 steel subjected to strain-path changes. |
Yu, HaiYan; He, ZeZhen; Shen, JiaYi |
Report |
Aug 1, 2016 |
3652 |
| Study of surface heat treatment and its effects on fatigue behavior of steel--a review. |
Kumar, M. Senthil; Ragunathan, S.; Suresh, M.; Srinivashan, V.R. |
Report |
May 30, 2016 |
4750 |
| Influence of different surface treatments on fatigue behavior of En8 steel. |
Kumar, M. Senthil; Ragunathan, S.; Suresh, M.; Srinivashan, V.R. |
|
May 30, 2016 |
4338 |
| Effect of herbal based cutting fluids on machining forces and microbial contagions in turning of EN 8 steel. |
Ganeshkumar, S.; Thirunavukkarasu, V. |
Report |
Mar 1, 2016 |
3069 |
| Time-efficient automated analysis for fibre orientations in steel fibre reinforced concrete/Efektiivne automatiseeritud meetod kiudude orientatsiooni maaramiseks teraskiudarmeeritud betoonis. |
Pastorelli ja, Emiliano; Herrmann, Heiko |
Report |
Mar 1, 2016 |
3252 |
| Performance and behaviour of ground granulated blast furnace slag imparted to geopolymer concrete structural elements and analyzed with ANSYS. |
Antonyamaladhas, Maria Rajesh; Chachithanantham, Selvamony; Ramaswamy, Anandakumar |
Report |
Jan 1, 2016 |
4253 |
| Effect of Al on microstructure and properties of hot-rolled 2205 dual stainless steel. |
Meng, Qian; La, Peiqing; Yao, Liang; Zhang, Peng; Wei, Yupeng; Guo, Xin |
|
Jan 1, 2016 |
3838 |
| Mathematical modelling of surface roughness for evaluating the effects of cutting parameters in drilling process. |
Zhujani, Fatlume; Qehaja, Nexhat; Abdullahu, Fitore; Bruci, Mirlind |
Report |
Jan 1, 2016 |
2930 |
| Use of waterjet in manufacturing test bars of high-strength steels. |
Jenicek, Stepan; Vratislav, Kotesovec; Kalina, Tomas; Masek, Bohuslav |
Report |
Jan 1, 2016 |
2215 |
| Impact crack initiation and propagation energy of prolonged exploited heat resistant steel. |
Hodzic, Damir; Hajro, Ismar |
Report |
Jan 1, 2016 |
1956 |
| Microstructure of MS1 Maraging steel in 3D-printed products after semi-solid processing. |
Rubesova, Katerina; Jemcek, Stepan; Kana, Josef; Zetkova, Ivana |
Report |
Jan 1, 2016 |
1838 |
| Machining of difficult-to-cut materials. |
Bleicher, Friedrich; Finkeldei, Daniel; Siller, Anton |
Report |
Jan 1, 2016 |
3039 |
| A study of material-technological modelling for choosing the ideal cooling rate for designing production of closed die forgings using 30MnVS6 steel. |
Ibrahim, Khodr; Vorel, Ivan; Jenicek, Stepan; Kana, Josef; Rubesova, Katerina; Opatova, Katerina; Ko |
Report |
Jan 1, 2016 |
1381 |
| Research of influence of gas nitriding duration on formation of diffusion layer of steel 20Kh2N4A. |
Kostyk, K.O. |
Report |
Jul 1, 2015 |
2339 |
| Testing of special Ni-Mo steel and its suitability for cutting tools. |
Hanzl, Pavel; Zetek, Miroslav; Zetkova, Ivana |
Report |
Jan 1, 2015 |
2256 |
| THE JOINING OF THREE DISSIMILAR METALLIC ALLOYS BY A SINGLE-PASS FRICTION STIR WELDING. |
|
Report |
Dec 31, 2014 |
2271 |
| Chloride-induced corrosion of reinforcement in concrete structures predicted using artificial neural network. |
Azariyun, E.; Azariyun, M. |
Report |
Jun 20, 2014 |
3902 |
| Heat treatment effects to the fracture splitting parameters of C70S6 connecting rod/C70S6 svaistikliu terminio apdirbimo itaka skilimo sklidimo parametrams. |
Ozdemir, Zafer |
Report |
May 1, 2014 |
2553 |
| Influence of the wave form on the material response delay. |
Azinheira, J.R.; Reis, L.; Ribeiro, A.M.R. |
Report |
Jan 1, 2014 |
2753 |
| Evaluation of varying ductile fracture criteria for 42CrMo steel by compressions at different temperatures and strain rates. |
Quan, Guo-zheng; Luo, Gui-chang; Mao, An; Liang, Jian-ting; Wu, Dong-sen |
Report |
Jan 1, 2014 |
4279 |
| A model to describe the magnetomechanical behavior of martensite in magnetic shape memory alloy. |
Guo, Zaoyang; Li, Haitao; Wan, Qiang; Peng, Xianghe; Wen, Jing |
Report |
Jan 1, 2014 |
3579 |
| Friction welding of aluminium and aluminium alloys with steel. |
Ambroziak, Andrzej; Korzeniowski, Marcin; Kustron, Pawel; Winnicki, Marcin; Sokolowski, Pawel; Harap |
Report |
Jan 1, 2014 |
7525 |
| RC beams with steel fibers under impact loads/Vigas de concreto armado sob cargas de impacto. |
Damasceno, Iana Ingrid Rocha; de Pina Ferreira, Mauricio; de Oliveira, Denio Ramam Carvalho |
|
Jan 1, 2014 |
3925 |
| Research of seam dimensional dependence on the short-circuit current in MMA welding process/Siules matmenu priklausomybes nuo trumpojo jungimo sroves stiprio tyrimas, virinant glaistytaisiais elektrodais. |
Rimkus, Mindaugas; Visniakas, Ivanas; Kazakevicius, Ceslovas |
Report |
Dec 1, 2013 |
1819 |
| Investigation on distribution of stresses in steel and aluminium alloy arms of a car suspension system/Itempiu pasiskirstymo lengvojo automobilio pakabos plieninese ir aliuminio lydinio svirtyse tyrimas. |
Melaika, M.; Nagurnas, S.; Peceliunas, R.; Visniakov, N.; Garbincius, G. |
Report |
Nov 1, 2013 |
4924 |
| Rheological strains in concrete modified with steel fibre reinforcement. |
Bywalski, Czeslaw; Kaminski, Mieczyslaw |
Report |
Oct 1, 2013 |
5184 |
| The influence of the prestress of reinforced steel on the behavior of the flexural elements of reinforced concrete/Armaturos isankstiniu itempiu itaka gelzbetoniniu lenkiamuju elementu elgsenai. |
Jokubaitis, Aidas |
Report |
Oct 1, 2013 |
3416 |
| Accuracy analysis of design methods for concrete beams reinforced with fiber reinforced polymer bars/Kompozitais armuotu betoninu elementu projektavimo metodu tikslumo analize. |
Timinskas, Edgaras; Jakstaite, Ruta; Gribniak, Viktor; Tamulenas, Vytautas; Kaklauskas, Gintaris |
Report |
Sep 1, 2013 |
6029 |
| Some considerations on the mechanical testing of aluminum-steel conductors and their cores/Aliuminio ir plieno laidininku ir ju serdziu mechaniniu bandymu svarba. |
Dumitru, I.; Marsavina, L.; Faur, N.; Kun, L. |
Report |
Jul 1, 2013 |
2827 |
| Steel abrasive wear forecasting by wearing surfaces microgeometric parameters/Plienu abrazyvinio dilimo prognozavimas pagal dylancio pavirsiaus mikrogeometrinius parametrus. |
Jankauskas, V.; Skirkus, R. |
Report |
Jul 1, 2013 |
2824 |
| Tool life evaluation of cutting materials in hard turning of AISI H11/Loikeriistamaterjalide pusivus terase AISI H11 treimisel rasketes tingimustes. |
Fnides, Brahim; Boutabba, Smail; Fnides, Mohamed; Aouici, Hamdi; Yallese, Mohamed Athmane |
Report |
Jun 1, 2013 |
2425 |
| Experimental research on end joint of steel-concrete composite truss. |
Zhou, Lingyu; He, Guichao |
Report |
Dec 1, 2012 |
4731 |
| A simple technique to determine interface slip of stud connected SCC girders. |
Prakash, A.; Lakshmanan, N.; Anandavalli, N.; Madheswaran, C.K.; Iyer, N.R.; Rajasankar, J. |
Report |
Sep 1, 2012 |
4111 |
| Impact resistance of sustainable SFRCC road pavement/ Subalansuotos, plieno pluostu armuoto cemento kompozito kelio dangos atsparumas smugiams/ Ilgtspejigas ar terauda skiedru stiegrotas cementbetona cela segas triecienizturiba/ Jatkusuutliku teraskiuga armeeritud tsementkomposiit--(SFRCC) teekatte loogikindlus. |
Katzer, Jacek |
Report |
Sep 1, 2012 |
2988 |
| Investigation of steel fibre pullout and modeling of bridging behaviour in SFRC. |
Skadins, Ulvis; Brauns, Janis |
Report |
Sep 1, 2012 |
5704 |
| Influence of steel austenitization to part quality in continuous austempering/Austenitiseerimise moju detaili kvaliteedile pidevtermotootlusel. |
Jaason, Karli; Peetsalu, Priidu; Saarna, Mart; Kulu, Priit; Mikli, Valdek; Lind, Liina; Beilmann, Ju |
Report |
Sep 1, 2012 |
3307 |
| Effect of high-force impulse loads on the modification of mechanical properties of heat-resistant steel after service/Ekspluatatsioonis olnud kuumuskindla terase mehaaniliste omaduste parandamine, kasutades koormamist suurte impulssidega. |
Chausov, Mykola; Maruschak, Pavlo; Pylypenko, Andriy; Sergejev, Fjodor; Student, Oleksandra |
Report |
Sep 1, 2012 |
2118 |
| Assessment of residual stresses in steels and carbide composites by load and depth sensing indentation with spherical indenter/Terastes ja karbiidkomposiitides esinevate jaakpingete hindamine kuulindentoriga koormus-sugavuskontrollitava indenteerimise teel. |
Sergejev, Fjodor; Petrov, Mihhail |
Report |
Sep 1, 2012 |
3085 |
| Investigation into the technological properties of coolants with liquid crystal additives/Tepimo ir ausinimo skyscio su skystuju kristalu priedais technologiniu savybiu tyrimas. |
Strolia, Vaidas; Moksin, vadim; Urbanavicius, Robertas |
Report |
Dec 1, 2011 |
1816 |
| Experimental and statistical investigation of thermo-mechanical friction drilling process/Termomechaninio frikcinio grezimo proceso eksperimentinis ir statistinis tyrimas. |
Krasauskas, P. |
Report |
Nov 1, 2011 |
2321 |
| Corrosion protection of AISI 316 stainless steel by ALD alumina/titania nanometric coatings. |
Marin, E.; Lanzutti, A.; Guzman, L.; Fedrizzi, L. |
Report |
Oct 1, 2011 |
2806 |
| Some comments on the theory of short fibre reinforced materials/Kommentaare luhikeste kiududega armeeritud materjalide teooriale. |
Herrmann, Heiko; Eik, Marika |
Report |
Sep 1, 2011 |
2810 |
| Calculation model for steel fibre reinforced concrete punching zones of bridge superstructure and foundation slabs/ Tiltu gelzbetoniniu perdangu ir pamatu ploksciu praspaudimo zonos dispersinio armavimo skaiciavimo modelis/ Caurspiesanas bides pretestibas aprekina modelis tiltu laiduma un pamatu platnu konstrukcijam no fibrubetona/Terasfiibriga armeeritud .... |
Marciukaitis, Gediminas; Salna, Remigijus; Jonaitis, Bronius; Valivonis, Juozas |
Report |
Sep 1, 2011 |
4781 |
| A model for strength and strain analysis of steel fiber reinforced concrete/Betono, armuoto plienine dispersine armatura, stiprio ir deformaciju apskaiciavimo modelis. |
Marciukaitis, Gediminas; Salna, Remigijus; Jonaitis, Bronius; Valivonis, Juozas |
Report |
Mar 1, 2011 |
6178 |
| Combined effect of deformation and heat treatment on carbide distribution in RST37-2 steel. |
Kucerova, Ludmila; Jirkova, Hana; Jandova, Dagmar; Masek, Bohuslav |
Report |
Jan 1, 2011 |
1450 |
| Machining of ferritic-martensitic steel in power industry. |
Janda, Zdenek; Fulemova, Jaroslava; Rehor, Jan |
Report |
Jan 1, 2011 |
1720 |
| The influence of intercritic quenching in ultrasonic field on the mechanical properties of a dual-phase steel determined by universal hardness test. |
Dulucheanu, Constantin; Severin, Traian-Lucian; Bancescu, Nicolai |
Report |
Jan 1, 2011 |
1526 |
| The preloading effects on fatigue strength and fatigue life. |
Jinescu, Valeriu; Sima, Teodor; Chelu, Angela; Jinescu, Cosmin |
Report |
Jan 1, 2011 |
1854 |
| The kinematic displacements of the two-spans single lane suspension steel footbridge and their stabilization/Dvieju tarpatramiu kabamuju vienajuosciu pesciuju plieno tiltu kinematiniai poslinkiai ir ju stabilizavimas. |
Tarvydaite, Giedre; Juozapaitis, Algirdas |
Report |
Dec 1, 2010 |
3684 |
| Investigation of low cycle asymmetric torsion/Mazaciklio asimetrinio sukimo tyrimas. |
Daunys, M.; Cesnavicius, R. |
Report |
Nov 1, 2010 |
2979 |
| Machinability investigation in hard turning of AISI H11 hot work steel with CBN tool/Karsciui arsparaus plieno aisi H11 apdirbamumo rupiai tekinant CBN irankiu tyrimas. |
Aouici, H.; Yallese, M.A.; Fnides, B.; Mabrouki, T. |
Report |
Nov 1, 2010 |
4349 |
| Research on the mechanical properties of the weld seams of constructional steel using vibration energy method during welding/Konstrukcinio plieno suvirinimo siuliu mechaniniu savybiu tyrimas suvirinimo metu naudojant vibracijos energija. |
Rumbutis, Laurynas; Visniakas, Ivanas; Jurcius, Aurimas |
Report |
Jul 1, 2010 |
1384 |
| Quantitative analysis of bonded structures in dual-phase steels. |
Krebs, Benoit; Hazotte, Alain; Germain, Lionel; Goune, Mohamed |
Report |
Jul 1, 2010 |
3178 |
| Adhesives in strengthening of steel structures/Kliju naudojimas plieninems konstrukcijoms stiprinti. |
Pasternak, Hartmut; Kubieniec, Gabriel; Piekarczyk, Marek |
Report |
Jun 1, 2010 |
2279 |
| Analysis of deflections up to failure of composite steel fiber-reinforced concrete slabs/Plieniniu plausu armuotu kompozitiniu plienbetoniniu ploksciu ilinkiu iki suirimo analize. |
Petkevicius, Mindaugas; Valivonis, Juozas |
Report |
Jun 1, 2010 |
3363 |
| Automatic arc welding and overlaying welding of steel using waste materials powder/Lankinis automatinis plieno suvirinimas ir apvirinimas naudojant antriniu medziagu miltelius. |
Ambroza, P.; Kavaliauskiene, L.; Pupelis, E. |
Report |
Mar 1, 2010 |
2438 |
| Effect of steel fibers on the behavior of over-reinforced beams subjected to pure torsion. |
Gunneswara Rao, T.D.; Rama Seshu, D.; Warnitchai, P. |
Report |
Mar 1, 2010 |
4193 |
| New waterborne paints with different binders and corrosion inhibition application. |
Mohamed, H.A. |
|
Jan 1, 2010 |
2440 |
| Effect of structural elements on surface segregation in interstitial-free (IF) steels. |
Krainikov, A.V.; Shchigolev, V.V. |
Report |
Jan 1, 2010 |
3756 |
| Effect of explosive loading on mechanical properties of concrete and reinforcing steel: towards developing a predictive model/Mechaniniu betono ir armaturos savybiu prognozavimas sprogimu sukeliamo apkrovimo atveju. |
Juocevicius, Virm.; Vaidogas, E.R. |
Report |
Jan 1, 2010 |
5986 |
| Influence of low temperature thermomechanical treatment on carbide morphology of RST37-2 steel. |
Jirkova, Hana; Kucerova, Ludmila; Malina, Jiri; Hauserova, Daniela; Aisman, David; Masek, Bohuslav |
Report |
Jan 1, 2010 |
1501 |
| Research of surface roughness average of steel C45 during turning. |
Salihu, Avdi; Zeqiri, Hakif Mehmet; Bunjaku, Avdyl; Qehaja, Nexhat E.; Zeqiri, Fitim |
Report |
Jan 1, 2010 |
1346 |
| Accelerated spheroidization and refinement in C45 steel. |
Hauserova, Daniela; Dlouhy, Jaromir; Novy, Zbysek |
Report |
Jan 1, 2010 |
1509 |
| Mathematical and experimental modelling of the electron beam surface hardening. |
Visan, Aurelian; Neagu, Dumitru; Ionescu, Nicolae; Ioan, Daniel |
Report |
Jan 1, 2010 |
1676 |
| The effect of electrical--technological parameters on electron beam surface hardening. |
Visan, Aurelian; Neagu, Dumitru; Ionescu, Nicolae; Ioan, Daniel |
Report |
Jan 1, 2010 |
1185 |
| A modeling study of the WJC etching process of steel and stainless steel materials. |
Popan, Ioan Alexandru; Balc, Nicolae Octavian; Luca, Alina; Curta, Razvan |
Report |
Jan 1, 2010 |
1527 |
| Physical--mechanical characteristics dependence on compacting pressure for reinforced with steel yarns pieces. |
Didu, Anca; Didu, Marin; Radu, Stefan |
Report |
Jan 1, 2010 |
951 |
| Use of AE method for detection of steel lamination in the industrial pressure vessel. |
Gomera, V.P.; Sokolov, V.L.; Fedorov, V.P.; Okhotnikov, A.A.; Saykova, M.S. |
Report |
Jan 1, 2010 |
2608 |
| Low cycle stress strain curves and fatigue under tension-compression and torsion/Mazaciklio deformavimo ir suirimo kreives esant tempimui-gniuzdymui ir sukimui. |
Daunys, M.; Cesnavicius, R. |
Report |
Nov 1, 2009 |
2915 |
| Effect of sheet thickness on FLD for (HR Grade). |
Ramsing, R. Patel; Raval, H.K. |
Report |
Nov 1, 2009 |
1967 |
| Effect of nano-[Al.sub.2][O.sub.3] particles on the corrosion behavior of alkyd based waterborne coatings. |
Dhoke, Shailesh K.; Sinha, T. Jai Mangal; Khanna, A.S. |
|
Sep 1, 2009 |
3916 |
| Measurement of the tensile and yield strength of boiler steels by small punch and tensile test methods/Aurukatlateraste tombetugevuse ja voolepiiri mootmine kuuliga surumise ning tombekatse meetodil. |
Klevtsov, Ivan; Dedov, Andrei; Molodtsov, Artjom |
Report |
Jun 1, 2009 |
2420 |
| Investigation of low cycle fatigue crack opening by finite element method/ Plysio atsiverimo tyrimas baigtiniu elementu metodu esant mazacikliam apkrovimui. |
Jakusovas, A.; Daunys, M. |
Report |
May 1, 2009 |
1755 |
| Surface roughness model in turning hardened hot work steel using mixed ceramic tool/ Pavirsiaus siurkscio nustatymo modelis tekinant sukietinta, karsciui atsparu pliena mineralu keramikos irankiu. |
Fnides, B.; Yallese, M.A.; Mabrouki, T.; Rigal, J.-F. |
Report |
May 1, 2009 |
3048 |
| Influence of carburized surface on plastic properties of steel during tempering/Ianglinto pavirsiaus itaka plieno plastinems savybems atleidimo metu. |
Janutiene, R. Kandrotaite |
Report |
May 1, 2009 |
2695 |
| Toughness of steel fiber reinforced silica fume concrete under compression. |
Ramadoss, P.; Prabakaran, V.; Nagamani, K. |
Report |
Feb 1, 2009 |
4475 |
| Statistical evaluation of low cycle durability for corrosion and heat-resistant steels welded joints materials at room and elevated temperature. |
Daunys, M.; Stulpinaite, A. |
Report |
Jan 1, 2009 |
2863 |
| Analysis of the variation of metals mechanical properties depending on operation time. |
Januteniene, J.; Didziokas, R.; Gintalas, M. |
Report |
Jan 1, 2009 |
2288 |
| Acoustic emission monitoring and fatigue life prediction in axially loaded notched steel specimens. |
Barsoum, Fady F.; Suleman, Jamil; Korcak, Andrej; Hill, Eric V.K. |
Report |
Jan 1, 2009 |
7422 |
| Research of the horizontal parameters of the roughness machined surface by turning. |
Salihu, Avdi; Zeqiri, Hakif; Bunjaku, Avdyl; Qehaja, Nexhat; Osmani, Hysni; Kycyku, Azem |
Report |
Jan 1, 2009 |
1104 |
| Mathematical models of flank wear curve during the turning of steel C60E4. |
Qehaja, Nexhat; Bunjaku, Avdyl; Kacani, Jorgaq; Salihu, Avdi; Zeqiri, Hakif; Osmani, Hysni |
Report |
Jan 1, 2009 |
1234 |
| Temperature and speed influence on plastic deformation strength of high speed steel. |
Catana, Dorin; Catana, Dorina |
Report |
Jan 1, 2009 |
1204 |
| Contribution to modelling the effect of explosive on accelerated material in explosion welding. |
Benak, Michal; Taraba, Bohumil; Turna, Milan |
Report |
Jan 1, 2009 |
1112 |
| Finite element modeling of a cutting edge temperature in high speed turning of unalloyed steel. |
Ceau, Gheorghe; Popovici, Victor; Tanase, Ioan; Predincea, Nicolae |
Report |
Jan 1, 2009 |
1472 |
| Ultrasonic influence on mechanical characteristics and metallography for naval welded steel. |
Dumitrache, Constantin; Barhalescu, Mihaela; Oanta, Emil; Sabau, Adrian |
Report |
Jan 1, 2009 |
1148 |
| Flank wear in turning of hardened steel 42CrMo4. |
Zeqiri, Hakif; Salihu, Avdi; Bunjaku, Avdyl; Osmani, Hysni; Qehaja, Nexhat; Zeqiri, Fitim |
Report |
Jan 1, 2009 |
1795 |
| Correlation between cutting forces and tool wear when thread tapping AISI P20 hardened steel. |
Benga, Gabriel; Ciupitu, Ion; Stanimir, Alexandru |
Report |
Jan 1, 2009 |
1513 |
| Investigation of quality of the 20Kh13 steel cone billets produced by method of centrifugal electroslag casting. |
Skripnik, S.V.; Chernega, D.F.; Goryachek, A.V. |
Report |
Jul 1, 2008 |
1351 |
| Experimental investigations into electrochemical machining of high carbon high chromium die steel. |
Sekar, T.; Marappan, R. |
Report |
Feb 1, 2008 |
1715 |
| Testing of the parametres of the Q-P process in high strength low-alloyed steel. |
Aisman, David; Jirkova, Hana; Skalova, Ludmila; Masek, Bohuslav |
Report |
Jan 1, 2008 |
1110 |
| Aspects regarding terminal ballistics in Taylor tests. |
Trana, Eugen; Chereches, Tudor |
Technical report |
Jan 1, 2007 |
1325 |
