Title |
Author |
Type |
Date |
Words |
Flame Resistance Characteristics of Woven Jute Fiber Reinforced Fly Ash Filled Polymer Composite. |
Balan, G. Sakthi; Balasundaram, R.; Chellamuthu, K.; Gopan, S. Nandha; Dinesh, S.; Vijayan, V.; Sath |
|
Feb 12, 2022 |
5639 |
Cartilage polymers: From viscoelastic solutions to weak gels. |
Horkay, Ferenc; Douglas, Jack F. |
Report |
Feb 1, 2022 |
6963 |
Mechanical Behavior of Polymer Composites Reinforced with Coir and Date Palm Frond Fibers. |
Sadik, Tabassum; Muthuraman, S.; Sivaraj, M.; Negash, Kassu; Balamurugan, R.; Bakthavatsalam, S. |
|
Jan 17, 2022 |
4420 |
On finding the zero-shear-rate viscosity of polymer melts. |
Shaw, Montgomery T. |
Report |
Apr 1, 2021 |
8128 |
Significance of thermodynamics and rheological characteristics of dope solutions on the morphological evolution of polyethersulfone ultrafiltration membranes. |
Alibakhshi, Somayeh; Youssefi, Mostafa; Hosseini, Seyed Saeid; Zadhoush, Ali |
Report |
Mar 1, 2021 |
4831 |
Influence of Fiber Orientation on Impact Resistance Behavior of Woven Sisal Fiber Reinforced Polyester Composite. |
Dress, Genetu A.; Woldemariam, M. H.; Redda, D. T. |
|
Jan 1, 2021 |
6632 |
Study on Properties of Heat-Resistant Hybrid Resin Containing Silicon and Composites. |
Xuan, Lixin; Zhou, Quan; Wang, Zhiqiang; Su, Tao |
Report |
Nov 19, 2020 |
4491 |
Extrusion of highly filled flexible polymer sheet. |
Deshmukh, Shruti; Burbine, Stephen; Keaney, Erin; Baneijee, Shib Shankar; Panwar, Artee; Peters, Chr |
Report |
Nov 1, 2020 |
6084 |
Experimental and numerical investigation on flexural behavior of acrylonitrile-butadiene-styrene polymer. |
Dundar, Mehmet Akif; Dhaliwal, Gurpinder Singh; Ayorinde, Emmanuel |
Report |
Nov 1, 2020 |
7938 |
Transparent semi-crystalline polymeric materials and their nanocomposites: A review. |
Lin, Yunyin; Bilotti, Emiliano; Bastiaansen, Cees W.M.; Peijs, Ton |
Report |
Oct 1, 2020 |
14059 |
Phase transitions and mechanical properties of nitrocellulose plasticized by glycidyl azide polymer and nitroglycerine. |
Comtois, Etienne; Favis, Basil D.; Dubois, Charles |
|
Sep 1, 2020 |
6690 |
Fabrication of polystyrene/carbon nanocomposites with superior mechanical properties. |
Yeh, Shu-Kai; Su, Chi-Chun; Huang, Jian-Ming; Ke, Ming-Qing; Bogale, Dawit; Anbarasan, Ramasamy; Tun |
|
Aug 1, 2020 |
6628 |
A Comprehensive Review on Bast Fibre Retting Process for Optimal Performance in Fibre-Reinforced Polymer Composites. |
Lee, C.H.; Khalina, A.; Lee, S.H.; Liu, Ming |
|
Jul 31, 2020 |
19215 |
A comprehensive review of the polymer-based hydrogels with electrochemically synthesized silver nanoparticles for wound dressing applications. |
Nesovic, Katarina; Miskovic-Stankovic, Vesna |
|
Jul 1, 2020 |
18716 |
The critical organic modifier aliphatic tail length for the formation of poly(methyl methacrylate)-montmorillonite nanocomposites. |
Tiwari, Rajkiran R.; Natarajan, Upendra |
|
Jul 1, 2020 |
8680 |
Effects of phosphate emulsion-based montmorillonite on structure and properties of poly(styrene-ethylene-butylene-styrene) triblock copolymer. |
Yu, Hui; Li, Jun; Chen, Gang; Zhang, Ruifeng; Li, Yangyang; Qiu, Biwei; Li, Xiaoyan |
|
Jun 1, 2020 |
5393 |
Porosity Characterization of Carbon Fiber/Epoxy Composite Using Hg Porosimetry and Other Techniques. |
Monticeli, Francisco Maciel; Montoro, Sergio Roberto; Voorwald, Herman Jacobus Cornelis; Cioffi, Mar |
|
Apr 1, 2020 |
5575 |
Increasing Cold Tack of Polymeric Methylene Diphenyl Diisocyanate Resin with Partial Soy Flour Substitution. |
Asafu-Adjaye, Osei; Via, Brian; Banerjee, Sujit |
Report |
Mar 22, 2020 |
1114 |
Molecular Insights Into Chain Length Effects of Hindered Phenol on the Molecular Interactions and Damping Properties of Polymer-Based Hybrid Materials. |
Xu, Kangming; Zhou, Hongdi; Hu, Qiaoman; Wang, Junhui; Huang, Yue; Chen, Jinlei |
Report |
Mar 1, 2020 |
5748 |
Residence Time Distribution and Specific Mechanical Energy in Solid-State Shear Pulverization: Processing-Structure-Property Relationships in a Chilled Extruder. |
Onffroy, Philip R.; Miu, Evan V.; Confer, William J.; Darkes-Burkey, Caleb M.; Holler, William C.; W |
Report |
Mar 1, 2020 |
6516 |
Determination of the Pressure Dependence of Polymer Melt Viscosity Using a Combination of Oscillatory and Capillary Rheometer. |
Raha, Sumanta; Sharma, Harindranath; Senthilmurugan, M.; Bandyopadhyay, Sumanda; Mukhopadhyay, Prasa |
Report |
Mar 1, 2020 |
4671 |
Effect of Viscoelastic Properties of the Base Polymer on Extrusion Foaming with Thermally Expandable Microcapsules. |
Uchio, Tomoki; Takiguchi, Shota; Koda, Tomonori; Nishioka, Akihiro |
Report |
Mar 1, 2020 |
3300 |
Synthesis and Characterization of Amphiphilic Hairy Nanoparticles with pH and Ionic Dual-Responsiveness. |
Liu, Rui; Lu, Yuanyuan; Pu, Wanfen; Hu, Pan; Luo, Qiang; Luo, Haoyu |
Report |
Mar 1, 2020 |
6551 |
Numerical and Experimental Failure Analysis of Carbon Fiber-Reinforced Polymer-Based Pyrotechnic Separation Device. |
Ren, Mingfa; Weng, Fei; Sun, Jing; Zhang, Zhifeng; Ma, Zhiguo; Li, Tong |
|
Jan 1, 2020 |
6228 |
Solution Blow Spinning Poly(vinyl alcohol) Sub-microfibers Produced from Different Solvents. |
Viana, Jessica Lima; Franca, Thiago; Cena, Cicero |
|
Jan 1, 2020 |
2356 |
GRAPHENE OXIDE REINFORCED POLY (VINYL ALCOHOL) NANOCOMPOSITE: FABRICATION AND CHARACTERIZATION FOR THERMAL AND MECHANICAL PROPERTIES INVESTIGATIONS. |
Makharza, Sami; Faroun, Maryam; Bawwab, Mohammad; Afaneh, Ibrahim |
|
Dec 1, 2019 |
2676 |
Tensile Behavior of Carbon Fiber-Reinforced Polymer Composites Incorporating Nanomaterials after Exposure to Elevated Temperature. |
Truong, Gia Toai; Van Tran, Hai; Choi, Kyoung-Kyu |
|
Nov 30, 2019 |
8038 |
An Effective Method of Processing Immiscible Polymer Blends into Strong Fiber. |
Shi, Jing; Fang, Xudong; Maffe, Adam P.; Yao, Donggang |
|
Oct 1, 2019 |
7312 |
Additive Manufacturing: A Novel Method for Developing an Acoustic Panel Made of Natural Fiber-Reinforced Composites with Enhanced Mechanical and Acoustical Properties. |
Sekar, Vignesh; Fouladi, Mohammad Hosseini; Namasivayam, Satesh Narayana; Sivanesan, Sivakumar |
|
Sep 30, 2019 |
12696 |
Comparing the Rheological and Reinforcing Effects of Graphene Oxide on Glassy and Semicrystalline Polymers. |
Charitos, Ilias; Mouzakis, Dionysios; Kontou, Evagelia |
Case study |
Sep 1, 2019 |
7595 |
Influence of Screw Configuration and Processing Temperature on the Properties of Short Glass Fiber Reinforced Polypropylene Composites. |
Lekube, Blanca Maria; Purgleitner, Bianca; Renner, Karoly; Burgstaller, Christoph |
Report |
Aug 1, 2019 |
5533 |
Influence of Thermal Annealing on Mechanical Properties and In Vitro Degradation of Poly(p-Dioxanone). |
Zhang, Jian-Feng; Jones, Scott; Wang, Donghui; Wood, Andrew; Washington, Tommy; Acreman, Kevin; Cuev |
Report |
Aug 1, 2019 |
5966 |
Aesthetic and Mechanical Suitability of a Clear Synthetic Resin as a Unconventional Binder for Road Pavements. |
Pasetto, Marco; Baliello, Andrea; Giacomello, Giovanni; Pasquini, Emiliano |
|
Jul 31, 2019 |
8229 |
Study of Tensile Properties of Multiwalled Carbon Nanotube/Polyether Ether Ketone Polymer Composites at the Nanoscale. |
Hsu, Chun-Yen; Scrafford, Kathryn; Ni, Chaoying; Deng, Fei |
Report |
Jun 1, 2019 |
3731 |
Production of Polyhydroxybutyrate (PHB) by Bacteria Isolated from Soil of Saudi Arabia. |
Alshehrei, Fatimah |
|
Jun 1, 2019 |
4013 |
Optimization of Different Surface Modifications for Binding of Tumor Cells in a Microfluidic Systems. |
Meco, Hanife Ecenur; Karadag, Aslihan; Omeroglu, Sevde; Aydemir, Gizem; Kocal, Gizem Calibasi; Oruc, |
|
May 1, 2019 |
2450 |
Crystalline Nanocellulose/Thermoplastic Polyester Composites Prepared by In Situ Polymerization. |
Clarke, Ashley; Vasileiou, Alexandros A.; Kontopoulou, Marianna |
Report |
May 1, 2019 |
4774 |
Formation of Polypropylene/Functional Graphene Oxide Nanocomposites With Different FGs Loading in Elongation Flow Condition. |
Qiu, Feng; Yin, Xiaochun; Qu, Jin-Ping |
Report |
Apr 1, 2019 |
5541 |
A Novel Crystallization Kinetics Model of Transcrystalline used for Crystallization Behavior Simulation of Short Carbon Fiber-reinforced Polymer Composites. |
Fang, Haidong; Wang, Xinyu; Gu, Junfeng; Li, Zheng; Ruan, Shilun; Shen, Changyu |
Report |
Apr 1, 2019 |
6120 |
Correlation Between Inhomogeneity in Polyacrylonitrile Spinning Dopes and Carbon Fiber Tensile Strength. |
Raghavan, Vijay; Gulgunje, Prabhakar V.; Gupta, Kishor K.; Kamath, Manjeshwar G.; Liu, Yaodong; Pram |
Report |
Mar 1, 2019 |
3956 |
Review of the Hierarchical Multi-Mode Molecular Stress Function Model for Broadly Distributed Linear and LCB Polymer Melts. |
Narimissa, Esmaeil; Wagner, Manfred H. |
Report |
Mar 1, 2019 |
8240 |
[N.sub.2] Supercritical Jet to Modify the Characteristics of Polymer Material Surfaces: Influence of the Process Parameters on the Surface Topography. |
Khalsi, Yosri; Heim, Frederic; Lee, Jason T.; Tazibt, Abdel |
Report |
Mar 1, 2019 |
7162 |
Tunable Mechanical Properties of Core-Shell Polymers of Poly(Hexyl Methacrylate) and Poly(Methyl Methacrylate) by Semicontinuous Heterophase Polymerization. |
Aguilar, L.O. Sahagun; Andrade, I. Ceja; Mendoza, A.G. Alvarado; Arevalo, J.E. Puig; Velasco, M. Rab |
Technical report |
Feb 1, 2019 |
5451 |
Analisis de los cambios en las propiedades mecanicas de materiales de subrasante por la adicion de materiales polimericos reciclados/Analysis of the changes in the mechanical properties of subrasant materials by the addition of recycled polymeric materials/Analise das mudancas nas propriedades mecanicas de materiais de subleito por adicao de materiais polimericos reciclados. |
Rodriguez, Erika Julieth Serrano; Gonzalez, Edgar Alexander Padilla |
|
Jan 1, 2019 |
9854 |
Preparing and Mounting Polymer Nanofibers onto Microscale Test Platforms. |
Shrestha, Ramesh; Shen, Sheng; de Boer, Maarten P. |
|
Dec 1, 2018 |
6909 |
A Study on the Photostabilizer Additives on the Textile Fiber Reinforced Polymer Composites: Mechanical, Thermal, and Physical Analysis. |
Bodur, Mehmet Safa; Bakkal, Mustafa; Sonmez, Hasret Ece |
Report |
Jul 1, 2018 |
5902 |
Matrix Tacticity Controlled Tuning of Microstructure, Constitutive Behavior and Rheological Percolation Effect of Melt-Mixed Amino-Functionalized MWCNT/PP Nanocomposites. |
Das, Dibyendu; Sethy, Sucharita; Satapathy, Bhabani K. |
Report |
Jul 1, 2018 |
7910 |
Multiwalled Carbon Nanotube/Montmorillonite Hybrid Filled Ethylene-Co-Vinyl Acetate Nanocomposites With Enhanced Mechanical Properties, Thermal Stability, and Dielectric Response. |
Bhuyan, B.; Roy, A.; Srivastava, S.K.; Mittal, V. |
Report |
Jul 1, 2018 |
7615 |
Influence of Humidity, Temperature, and Annealing on Microstructure and Tensile Properties of Electrospun Polyacrylonitrile Nanofibers. |
Barua, Bipul; Saha, Mrinal C. |
Report |
Jun 1, 2018 |
7855 |
Newly Developed Resins More Challenging to Control in Production Plants: Developments in resins have opened up a whole new world of design choices, but challenges remain because current quality control parameters only show part of the picture. |
Monrabal, B.; Ortin, A.; del Hierro, P. |
|
May 1, 2018 |
1899 |
Evaluation of the Shape Memory Behavior of a Poly(cyclooctene)-Based Nanocomposite Device. |
Dorigato, A.; Pegoretti, A. |
Report |
Mar 1, 2018 |
3546 |
Analysis of Mechanical Properties of Alternative Materials for Process Fused Deposit Modeling. |
Cekic, Ahmet; Obucina, Murco; Begic-Hajdarevic, Derzija; Hebibovic, Miran |
Report |
Jan 1, 2018 |
2447 |
Mechanical Properties of Polyethylene-Carbon Nanotube Composites Synthesized by In Situ Polymerization Using Metallocene Catalysts. |
Al-Harthi, Mamdouh A.; Bahuleyan, Bijal Kottukkal |
|
Jan 1, 2018 |
3060 |
Association of PLGA Microspheres to Carrier Pellets by Fluid Bed Coating: A Novel Approach towards Improving the Flowability of Microparticles. |
Beringhs, Andre O'Reilly; Fonseca, Aline Benedita dos Santos; De Campos, Angela Machado; Sonaglio, D |
|
Jan 1, 2018 |
7772 |
ENGINEERING PROPERTIES OF ACRYLIC EMULSION POLYMER MODIFIED BAMBOO REINFORCED CEMENT BONDED COMPOSITES. |
Akinyemi, Banjo A.; Omoniyi, Temidayo E. |
Report |
Sep 1, 2017 |
4538 |
Unleashing the power of dynamic mechanical analysis: the range of information that can be extracted through DMA makes it a valuable tool in the plastics analytical lab. |
Jansen, Jeffrey |
|
Sep 1, 2017 |
1256 |
Study of failure mechanisms of CFRP under mechanical load by impulse acoustic microscopy. |
Petronyuk, Yulia; Morokov, Egor; Levin, Vadim; Ryzhova, Tatiana; Chernov, Andrey; Sherbakov, Vladimi |
Report |
Jul 1, 2017 |
3551 |
Macroporous polyacrylamide hydrogels with tailored porosity and mechanical properties via microphase separation in the presence of hydroxyethylcellulose. |
Bignotti, Fabio; Agnelli, Silvia; Baldi, Francesco; Sartore, Luciana; Peroni, Isabella |
Report |
Jul 1, 2017 |
5762 |
Silane Coupling Agents--Benevolent Binders in Composites. |
Konakanchi, Anusha; Alla, Rama Krishna; Guduri, Vineeth |
|
Jul 1, 2017 |
3869 |
Mechanical and thermal properties of untreated bagasse fiber reinforced cardanol eco-friendly biocomposites. |
Balaji, A.; Karthikeyan, B.; Swaminathan, J.; Raj, C. Sundar |
Report |
Jun 1, 2017 |
3486 |
Synthesis of phenolic bio-resin for advanced biocomposites reinforced with coconut shell particle: mechanical and thermal properties. |
Sankar, R. Udhaya; Karthikeyan, B. |
Report |
Jun 1, 2017 |
3503 |
Study on tensile strength, impact strength and analytical model for heat generation in friction vibration joining of polymeric nanocomposite joints. |
Jafrey, Daniel D. Panneerselvam, Kavan |
Report |
May 1, 2017 |
6850 |
Feasibility of Reprocessing Natural Fiber Filled Poly(lactic acid) Composites: An In-Depth Investigation. |
Bhattacharjee, Sujal; Bajwa, Dilpreet S. |
|
Jan 1, 2017 |
6945 |
Combined Effects of Sustained Loads and Wet-Dry Cycles on Durability of Glass Fiber Reinforced Polymer Composites. |
Li, Mengting; Wang, Jun; Liu, Weiqing; Liang, Ruifeng; GangaRao, Hota; Li, Yang |
|
Jan 1, 2017 |
5806 |
Combustion and Mechanical Properties of Polymer-Modified Cement Mortar at High Temperature. |
Kim, Hyung-Jun; Park, Won-Jun |
|
Jan 1, 2017 |
4723 |
Tribological testing of polymeric material. |
Kubatova, Dana; Melichar, Martin; Pereira, Alejandro |
Report |
Jan 1, 2017 |
2175 |
Permeability and Tensile Strength of Concrete with Arabic Gum Biopolymer. |
Mohamed, Abdeliazim Mustafa; Osman, Mohd Hanim; Smaoui, Hichem; Ariffin, Mohd Azreen Mohd |
Technical report |
Jan 1, 2017 |
3940 |
The Compatibilization Effects of Alkylated-grafed-Graphene Oxide on Polypropylene/Polystyrene Blends. |
Hao, Yanping; Zhao, Xin; Dong, Jie; Zhang, Qinghua |
|
Jan 1, 2017 |
5851 |
Preparation of High Modulus Poly(Ethylene Terephthalate): Influence of Molecular Weight, Extrusion, and Drawing Parameters. |
Zhang, Jian Min; Hua, Qingsong; Reynolds, Christopher T.; Zhao, Yuling; Dai, Zuoqiang; Bilotti, Emil |
|
Jan 1, 2017 |
6445 |
Mechanical Property Analysis of Circular Polymer Membrane under Uniform Pressure. |
Jianbing, Sang; Xiang, Li; Sufang, Xing; Wenjia, Wang |
|
Jan 1, 2017 |
4191 |
Bond-Slip Behavior of Basalt Fiber Reinforced Polymer Bar in Concrete Subjected to Simulated Marine Environment: Effects of BFRP Bar Size, Corrosion Age, and Concrete Strength. |
Yang, Yongmin; Li, Zhaoheng; Zhang, Tongsheng; Wei, Jiangxiong; Yu, Qijun |
|
Jan 1, 2017 |
3899 |
Synthesis of Poly-(R-hydroxyalkanoates) by Cupriavidus necator ATCC 17699 Using Mexican Avocado (Persea americana) Oil as a Carbon Source. |
Flores-Sanchez, Araceli; Lopez-Cuellar, Ma. del Rocio; Perez-Guevara, Fermin; Lopez, Ulises Figueroa |
|
Jan 1, 2017 |
6675 |
Formulation of Bilayer Benzydamine HCl Patch Targeted For Gingivitis. |
Sanghai, Piyush; Nandgude, Tanaji; Poddar, Sushilkumar |
Report |
Jan 1, 2017 |
4346 |
Polyvinyl butyral chemically modified with a silane agent in the molten state. |
Sonego, Marilia; Costa, Lidiane Cristina; Ambrosio, Jose Donato |
Report |
Sep 1, 2016 |
5791 |
Vehicle door seals. |
Corneliussen, Roger |
Brief article |
Jul 1, 2016 |
185 |
Improved weld strength of vibration welded polyoxymethylene/multiwalled carbon nanotubes hybrid nanocomposites. |
Lin, Leyu; Schlarb, Alois K. |
Report |
Jun 1, 2016 |
4276 |
Foaming up nicely: injection molded foams are worth their weight in resin savings, but still have much room for improvement. |
Evans, Jon |
Report |
May 1, 2016 |
1702 |
Polyacrylonitrile solution homogeneity study by dynamic shear rheology and the effect on the carbon fiber tensile strength. |
Newcomb, Bradley A.; Gulgunje, Prabhakar V.; Liu, Yaodong; Gupta, Kishor; Kamath, Manjeshwar G.; Pra |
Report |
Mar 1, 2016 |
5365 |
Finite element based design of a polymer rotor of centrifugal pump. |
Allali, A.; Belbachir, S.; Lousdad, A. |
Report |
Jan 1, 2016 |
2943 |
Extraction of polymer stress--strain behavior in the presence of self-heating by the use of a simple model for the elastic--plastic deformation. |
Bernard, Chrystelle A.; Fond, Christophe; Ahzi, Said; Bahlouli, Nadia |
Report |
Nov 1, 2015 |
5552 |
Preparation of poly(vinyl alcohol) and hydroxypropyl-[beta]-cyclodextrin inclusion complex through polymer processing. |
Xiao, Hongqin; Kong, Xiangkun; Bao, Jianjun; Zhang, Sheng |
Report |
Sep 1, 2015 |
3539 |
Strength and deformation of polymer pieces at the light industry. |
Kulik, T.I.; Burmistenkov, O.P.; Zlotenko, B.M. |
Report |
Jul 1, 2015 |
1581 |
Polymer-ceramic implants. |
Corneliussen, Roger |
Brief article |
Jun 1, 2015 |
189 |
Modification of asphalt using polymer-forming monomer. |
Chung, Kyungho; Park, Moonsoo; Mun, Sungho; Ohm, Byungsik; Yoo, Pyeongjun; Hong, Youngkeun |
Report |
May 1, 2015 |
3646 |
Structure and properties of nylon 1010/ethylene-vinyl acetate rubber-based dynamically vulcanized thermoplastic elastomers filled with Si[O.sub.2]. |
Lu, Xianbo; Zhang, Hongmei; Zhang, Yong |
Report |
Mar 1, 2015 |
4312 |
Gas transport properties in waterborne polymer nanocomposite coatings containing organomodified clays. |
Stratigaki, M.; Choudalakis, G.; Gotsis, A.D. |
|
Nov 1, 2014 |
7622 |
On the potential of mean force of a sterically stabilized dispersion. |
Centeno, R. Catarino; Perez, E.; Goicochea, A. Gama |
|
Nov 1, 2014 |
5710 |
Characterisations of treated and untreated OPEFB fiber filled polymer nanocomposites at different fiber size. |
Fadzil, Nur Amanina Mohd; Kalam, Anizah; Kamarudzaman, Rahilah; Hyie, Koay Mei |
Report |
Jun 5, 2014 |
2665 |
Porous three dimensional (3-D) scaffolds of poly(3-hydroxybutyric acid) (PHB) and poly(3-hydroxybutyric-co-3-hydroxyvaleric acid) (PHBV): determination of salt leaching efficiency of solvent-casting particulate-leaching (SCPL). |
Zubairi, Saiful Irwan |
Report |
Jun 1, 2014 |
3985 |
Magnetic polymers. |
Corneliussen, Roger |
Brief article |
Jun 1, 2014 |
147 |
High-temperature flexible PPS products for harsh environments. |
Luo, Rong; Miller, Kent; Tu, Xiaoyan; Zhao, Xinyu |
Statistical data |
Apr 1, 2014 |
2915 |
Control of the mechanical and thermal properties of semicrystalline polymers via a new processing route of the equal channel multiple angular extrusion. |
Beloshenko, V.A.; Voznyak, A.V.; Voznyak, Y.V. |
Report |
Mar 1, 2014 |
5538 |
Melt rheological investigation of polylactide-nanographite platelets biopolymer composites. |
Narimissa, Esmaeil; Gupta, Rahul K.; Kao, Nhol; Choi, Hyoung J.; JoHands, Margaret; Bhattacharyal, S |
Report |
Jan 1, 2014 |
8389 |
Investigation of dielectric properties of industrial waste reinforced particulate polymer composites. |
Nimmagadda, Vijaya Kumar; Sarcar, M.M.M.; Koona, Ramji |
|
Jan 1, 2014 |
3082 |
In situ preparation of polyether amine functionalized MWCNT nanofiller as reinforcing agents. |
Yildrim, Ayber; Seckin, Turgay |
|
Jan 1, 2014 |
2764 |
Characterization of material stiffness on injection moulded microspecimens using different test methods. |
Drummer, Dietmar; Seefried, Andreas; Meister, Steve |
Report |
Jan 1, 2014 |
3742 |
Effect of nanoclay dispersion on the properties of a commercial glass ionomer cement. |
Fareed, Muhammad A.; Stamboulis, Artemis |
|
Jan 1, 2014 |
6353 |
Advancement in microstructural, optical, and mechanical properties of PVA (Mowiol 10-98) doped by ZNO nanoparticles. |
Kumar, N.B. Rithin; Crasta, Vincent; Praveen, B.M. |
|
Jan 1, 2014 |
4679 |
Fabrication and in vitro evaluation of nanosized hydroxyapatite/chitosan-based tissue engineering scaffolds. |
Sun, Tao; Khan, Tareef Hayat; Sultana, Naznin |
|
Jan 1, 2014 |
4127 |
Stress-strain analysis in TiN nanocoating deposited on polymer with respect to Au nanointerlayer. |
Kopernik, Magdalena; Milenin, Andrzej; Kac, Slawomir; Wrobel, Miroslaw |
|
Jan 1, 2014 |
6497 |
Accuracy analysis of design methods for concrete beams reinforced with fiber reinforced polymer bars/Kompozitais armuotu betoninu elementu projektavimo metodu tikslumo analize. |
Timinskas, Edgaras; Jakstaite, Ruta; Gribniak, Viktor; Tamulenas, Vytautas; Kaklauskas, Gintaris |
Report |
Sep 1, 2013 |
6029 |
Effects of the functionalizing agent, itaconic acid, on the mechanical properties of microemulsion-made core/shell polymers. |
Rabelero, Martin; Trujillo, Agustin; Ceja, Israel; Canche, Gonzalo; Mendizabal, Eduardo; Esquena, Jo |
Report |
Jul 1, 2013 |
4883 |
Getting rid of stress. |
Corneliussen, Roger |
Brief article |
Jul 1, 2013 |
119 |
Electrospun poly(ethylene oxide)/hydrated iron oxide/sodium alginate composite nanofibers with multi-functional properties. |
Moon, SungCheal; Lee, Jung-lim |
Report |
Jun 1, 2013 |
3366 |
Experimental analysis on flexural behaviour of concrete beams with GFRP reinforcement/Lenkiamuju elementu, armuotu stiklo pluosto armatura, elgsenos statmenajame pjuvyje eksperimentinis tyrimas. |
Atutis, Edgaras; Valivonis, Juozas; Atutis, Mantas |
Report |
Jun 1, 2013 |
2354 |
Rheological and thermal behaviors of commercial poly(aryletherketone)s. |
White, Kevin L.; Jin, Lin; Ferrer, Nangelie; Wong, Minhao; Bremner, Tim; Sue, Hung-Jue |
Report |
Mar 1, 2013 |
6433 |
Pretreatment of woven jute FRP composite and its use in strengthening of reinforced concrete beams in flexure. |
Sen, Tara; Reddy, H.N. Jagannatha |
|
Jan 1, 2013 |
9743 |
Manufacture of green-composite sandwich structures with basalt fiber and bioepoxy resin. |
Torres, J.P.; Hoto, R.; Andres, J.; Garcia-Manrique, J.A. |
|
Jan 1, 2013 |
3381 |
Biopolymer doped with titanium dioxide superhydrophobic photocatalysis as self-clean coating for lightweight composite. |
Rus, Anika Zafiah M.; Mohid, S.R.; Nurulsaidatulsyida, S.; Marsi, N. |
|
Jan 1, 2013 |
4286 |
Fabrication of conductive polypyrrole nanofibers by electrospinning. |
Cong, Yiqun; Liu, Shize; Chen, Haifeng |
|
Jan 1, 2013 |
1946 |
The investigation of bioactivity and mechanical properties of glass ionomer cements prepared from [Al.sub.2][O.sub.3]-Si[O.sub.2] glass and poly([gamma]-glutamic acid). |
Liu, Jinkun; Kuwahara, Yoshimitsu; Shirosaki, Yuki; Miyazaki, Toshiki |
|
Jan 1, 2013 |
3971 |
Self-assembly of ternary particles for tough colloidal crystals with vivid structure colors. |
Bao, Binfu; Liu, Duo; Yang, Youyou; Shen, Zhehong; You, Bo |
|
Jan 1, 2013 |
6128 |
Effects of mixing protocol on the performance of nanocomposites based on polyamide 6/acrylonitrile-butadiene-styrene blends. |
Oliveira, A.D.; Larocca, N.M.; Paul, D.R.; Pessan, L.A. |
|
Sep 1, 2012 |
5506 |
Influence of hollow glass microspheres on the mechanical and physical properties and cost of particle reinforced polymer composites/Oonsate klaassfaaride moju osake-armeeritud polumeerkomposiitmaterjali fuusikalis-mehaanilistele omadustele ja hinnale. |
Aruniit, Aare; Kers, Jaan; Majak, Juri; Krumme, Andres; Tall, Kaspar |
Report |
Sep 1, 2012 |
2735 |
Mechanical and morphological properties of poly(butylene adipate-co-terephthalate) and poly (lactic acid) blended with organically modified silicate layers. |
Shahlari, Mahin; Lee, Sunggyu |
Report |
Jul 1, 2012 |
4592 |
Effect of dispersion on rheological and mechanical properties of polypropylene/carbon nanotubes nanocomposites. |
Zhou, Kai; Gu, Shu-Ying; Zhang, Yi-Han; Ren, Jie |
Report |
Jul 1, 2012 |
5818 |
Improvement of thermal properties of biodegradable polymer poly(3-hydroxybutyrate) by modification with acryloyloxyethyl isocyanate. |
Chen, Bor-Kuan; Lo, Shuen-Hung; Shih, Chien-Chang; Artemov, Arseny V. |
Report |
Jul 1, 2012 |
3795 |
Mechanical and electrical properties of polyamide-6-based nanocomposites reinforced by fulleroid fillers. |
Zuev, Vjacheslav V.; Ivanova, Yulia G. |
Report |
Jun 1, 2012 |
3660 |
Shear flow of molten polymer in melt blowing. |
Xin, Sanfa; Wang, Xinhou |
Report |
Jun 1, 2012 |
3570 |
Characterization of polymer powder motion in a spherical mold in biaxial rotation. |
Aissa, Amara Ait; Duchesne, Carl; Rodrigue, Denis |
Report |
May 1, 2012 |
5733 |
Acid-modified carbon nanotubes distribution and mechanical enhancement in polystyrene/elastomer blends. |
Fan, Xi; Wang, Zhicheng; Wang, Ke; Deng, Hua; Chen, Feng; Fu, Qiang |
Report |
May 1, 2012 |
4126 |
Poly(lactic acid)/low-density polyethylene blends and its nanocomposites based on sepiolite. |
Nunez, K.; Rosales, C.; Perera, R.; Villarreal, N.; Pastor, J.M. |
Report |
May 1, 2012 |
12965 |
Influence of induced shear work on the properties of polyolefine nanocomposite pipes. |
Witschnigg, Andreas; Laske, Stephan; Kracalik, Milan; Holzer, Clemens |
Report |
May 1, 2012 |
3448 |
Measurement of polymer-to-polymer contact friction in thermoforming. |
Martin, P.J.; McCool, R.; Harter, C.; Choo, H.L. |
Report |
Mar 1, 2012 |
6398 |
Effect of carbon black structure on low-strain conductivity of polypropylene and low-density polyethylene composites. |
Fathi, Atefeh; Hatami, Kianoosh; Grady, Brian P. |
Report |
Mar 1, 2012 |
3520 |
Formulation of new synthetic binders: thermomechanical properties of resin/recycled polymer blends. |
Fuentes-Auden, Cristina; Martinez-Boza, Francisco J.; Navarro, Francisco J.; Partal, Pedro; Gallegos |
Report |
Feb 1, 2012 |
4261 |
Polyacrylonitrile/acrylamide-based carbon fibers prepared using a solvent-free coagulation process: fiber properties and its structure evolution during stabilization and carbonization. |
Yusof, N.; Ismail, A.F. |
Report |
Feb 1, 2012 |
4902 |
Synthesis, characterization and rheochemical of biocopolymer based on gelatin. |
Mohammadinasab, Esmat; Sadeghi, Mohammad; Shafiei, Fatemeh |
Report |
Feb 1, 2012 |
2362 |
Synthesis, evolution and chemorheology studies of a novel biocopolymer based on protein: collagen-g-poly (AMPS). |
Sadeghi, Mohammad; Morady, Sadegh |
Report |
Feb 1, 2012 |
2896 |
Synthesis, characterization, and degradation of biodegradable poly(mannitol citric dicarboxylate) copolyesters. |
Pasupuleti, Sasikiran; Avadanam, Anusha; Madras, Giridhar |
Report |
Oct 1, 2011 |
4480 |
Microcellular poly(hydroxybutyrate-co-hydroxyvalerate)-hyperbranched polymer-nanoclay nanocomposites. |
Javadi, Alireza; Srithep, Yottha; Pilla, Srikanth; Clemons, Craig C.; Gong, Shaoqin; Turng, Lih-Shen |
Report |
Sep 1, 2011 |
7181 |
Biaxial stretching of polymers using a novel and versatile stretching system. |
Qaiss, A.; Bousrnina, M. |
Report |
Jul 1, 2011 |
3215 |
Effect of blend composition and organoclay loading on the nanocomposite structure and properties of miscible poly(methyl methacrylate)/poly(styrene-co-acrylonitrile) blends. |
Tiwari, Rajkiran R.; Natarajan, Upendra |
Report |
May 1, 2011 |
8919 |
Properties of microinjection molding of polymer multiwalled carbon nanotube conducting composites. |
Abbasi, Samaneh; Derdouri, Abdessalem; Carreau, Pierre J. |
Report |
May 1, 2011 |
7591 |
Morphology, mechanical properties, and thermal stability of rigid PVC/clay nanocomposites. |
Mondragon, Margarita; Sanchez-Valdes, Saul; Sanchez-Espindola, Maria E.; Rivera-Lopez, Jesus E. |
Report |
Apr 1, 2011 |
3090 |
Modelling and experimental verification of mechanical properties of cotton knitted fabric composites/Silmuskootud puuvillakangast komposiitide mehaaniliste omaduste modelleerimine ja vordlemine katsetulemustega. |
Kononova, Olga; Krasnikovs, Andrejs; Dzelzitis, Karlis; Kharkova, Galina; Vagel, Angelina; Eiduksa, |
Report |
Mar 1, 2011 |
2718 |
Sulfonated poly(bis-A)-sulfones as proton exchange membranes for direct methanol fuel cell application. |
He, Shoulin; Yu, Jianjia; Li, Cuihua; Fang, Jianhua; Xu, Jing; Guan, Rong |
Report |
Feb 1, 2011 |
4536 |
Preparation of thermoplastic elastomer nanocomposites based on polyamide-6/olyepichlorohydrin-co-ethylene oxide. |
Naderi, Ghasem; Razavi-Nouri, Mohammad; Taghizadeh, Ehsan; Lafleur, Pierre G.; Dubois, Charles |
Report |
Feb 1, 2011 |
3921 |
Interpenetrating polymer network of blocked polyurethane and phenolic resin. I. synthesis, morphology, and mechanical properties. |
Sun, Yun-Yun; Chen, Chin-Hsing |
|
Feb 1, 2011 |
3441 |
Nanocrystalline cellulose: morphological,, physical, and mechanical properties. |
Landry, Veronic; Alemdar, Ayse; Blanchet, Pierre |
|
Feb 1, 2011 |
6036 |
Treatment of fast-growing poplar with monomers using in situ polymerization. Part I: dimensional stability and resistance to biodegradation. |
He, Wen; Nakao, Tetsuya; Yoshinobu, Masahiro; Zhang, Qisheng |
Report |
Feb 1, 2011 |
5450 |
Influence of molecular weight on rheological, thermal, and mechanical properties of PEEK. |
Yuan, Mingjun; Galloway, Jeffrey A.; Hoffman, Richard J.; Bhatt, Sanjiv |
Report |
Jan 1, 2011 |
5722 |
Prediction of elongation viscosity of polymer melts. |
Liang, Jizhao; Zhong, Lei |
Report |
Nov 1, 2010 |
2816 |
Studies on the melt spinning process of noncircular fiber by numerical and experimental methods. |
Zhou, Ji; Li, Jian; Yu, Wei; Li, Xin; Zhou, Chixing |
Report |
Oct 1, 2010 |
6700 |
Structure and properties of melt-spun PET/MWCNT nanocomposite fibers. |
Mazinani, Saeedeh; Ajji, Abdellah; Dubois, Charles |
Report |
Oct 1, 2010 |
6703 |
Flow/pressure characteristics and modeling of deformation processes of single-screw extruders. |
Borisov, A.A.; Berdyshev, B.V.; Hosseini, H.; Shirkavand-Hadavand, B. |
Report |
Oct 1, 2010 |
2751 |
Three-dimensional scanning electron microscopy characterization of the topography of textured polymeric surfaces. |
Ignell, Sofie; Arino, Ruth; Iannuzzi, Giovanna; Kleist, Ulf; Rigdahl, Mikael |
Report |
Aug 1, 2010 |
4481 |
Investigation of a strategy for well controlled inducement of microcellular and nanocellular morphologies in polymers. |
Janani, Hamed |
Report |
Aug 1, 2010 |
6559 |
Use of resol-modified bentonite clay nanocomposites in CB N660 filled SBR. |
Chakraborty, Sugata; Dasgupta, Saikat; Mukhopadhyay, Rabindra; Elastomer, Hari Shankar Singhania; Ba |
|
Aug 1, 2010 |
6003 |
Simulations of instability in fiber spinning of polymers. |
Gagov, Atanas; Leonov, Arkady I. |
Report |
Jul 1, 2010 |
6338 |
Characterization of microstructure and mechanical properties of biodegradable polymer blends of poly(L-lactic acid) and poly(butylene succinate-co-[member of]-caprolactone) with lysine triisocyanate. |
Vannaladsaysy, Vilay; Todo, Mitsugu; Jaafar, Mariatti; Ahmad, Zulkifli; Pasomsouk, Korakan |
Report |
Jul 1, 2010 |
3903 |
A knotted and interconnected skeleton structural model for predicting Young's modulus of binary phase polymer blends. |
Wang, Jianfeng F.; Carson, James K.; North, Mike F.; Cleland, Don J. |
Report |
Apr 1, 2010 |
4412 |
Morphologies and mechanical properties of organic-inorganic multilayered composites. |
Li, Juan; Suo, Jinping; Jia, Lintao |
Report |
Apr 1, 2010 |
4245 |
Preparation and interaction characteristics of exfoliated ABS/organoclay nanocomposite. |
Lim, Sang-Kyun; Hong, Eun-Pyo; Song, Yu-Hyun; Park, Bong Jun; Choi, Hyoung Jin; Chin, In-Joo |
Report |
Mar 1, 2010 |
4614 |
Effects of loading rate on viscoplastic properties of polymer geosynthetics and its constitutive modeling. |
Peng, Fang-Le; Li, Fu-Lin; Tan, Yong; Kongkitkul, Warat |
Report |
Mar 1, 2010 |
5981 |
Effects of addition of functionalized SEBS on rheological, mechanical, and tribological properties of polyamide 6 nanocomposites. |
Nishitani, Yosuke; Yamada, Yoshinao; Ishii, Chiharu; Sekiguchi, Isamu; Kitano, Takeshi |
|
Jan 1, 2010 |
7474 |
Effects of nanoparticle feed location during nanocomposite compounding. |
Ashter, Ali; Tsai, Su-Jung; Lee, Jun S.; Ellenbecker, Michael J.; Mead, Joey L.; Barry, Carol F. |
Report |
Jan 1, 2010 |
6622 |
Determination of the heat transfer coefficient from short-shots studies and precise simulation of microinjection molding. |
Nguyen-Chung, Tham; Juttner, Gabor; Loser, Cindy; Pham, Tung; Gehde, Michael |
Report |
Jan 1, 2010 |
4807 |
Influence of laser sintering parameters on mechanical properties of polymer products. |
Pilipovic, Ana; Valentan, Bogdan; Brajlih, Tomaz; Haramina, Tatjana; Balic, Joze; Kodvanj, Janos; Se |
Report |
Jan 1, 2010 |
1119 |
Cure Kinetics, phase behaviors, and fracture properties of bismaleimide resin toughened by poly(phthalazinone ether ketone). |
Han, Yongjin; Liao, Gongxiong; Xu, Yajuan; Yu, Guipeng; Jian, Xigao |
Report |
Dec 1, 2009 |
3596 |
The use of acrylated fatty acid methyl esters as styrene replacements in triglyceride-based thermosetting polymers. |
Campanella, Alejandrina; Scala, John J. La; Wool, Richard P. |
Report |
Dec 1, 2009 |
6672 |
Polyamide-6/high-density polyethylene blend using recycled high-density polyethylene as compatibilizer: morphology, mechanical properties, and thermal stability. |
Vallim, Marcio R.; Araujo, Joyce R.; Spinace, Marcia A. Silva; Paoli, Marco-A. De |
Technical report |
Oct 1, 2009 |
5436 |
To study the performance of E-Glass fibre composite cladding on the shear and flexure zones of reinforced concrete beams. |
Govindarajan, S.; Muthuramu, K.L.; Chandran, A. |
Report |
Sep 1, 2009 |
1900 |
On modeling the composition dependence of the bulk viscosity of immiscible polymer blends. |
Han, Chang Dae |
Report |
Sep 1, 2009 |
10718 |
Proposal of ultrasonic welding technique and weld performances applied to polymers. |
Qiu, Jianhui; Zhang, Guohong; Wu, Yongbo |
Report |
Sep 1, 2009 |
2455 |
Chemical composition, thermal and mechanical properties for cultivars of immature coconut fibers/Composicao quimica, propriedades mecanicas e termicas da fibra de frutos de cultivares de coco verde. |
Corradini, Elisangela; Rosa, Morsyleide De Freitas; De Macedo, Bruno Pereira; Paladin, Priscila Dani |
|
Sep 1, 2009 |
3710 |
Steady-state viscoelastic flow simulation of polymer melts in a rotational-type rheometer. |
Tanoue, Shuichi; Zielinski, Michal K.; Lemoto, Yoshiyuki |
Report |
Aug 1, 2009 |
4735 |
Turmeric FRP composites: experimental determination of flexural and impact properties. |
Srinivasababu, N.; Rao, K. Murali Mohan; Kumar, J. Suresh |
Report |
Jul 1, 2009 |
2688 |
Strength and ductility of GFRP wrapped corrosion-damaged concrete columns. |
Revathy, J.; Suguna, K.; Raghunath, P.N. |
Report |
Jun 1, 2009 |
2397 |
Effect of slenderness on fibre reinforced polymer wrapped reinforced concrete columns. |
Nagaradjane, V.; Raghunath, P.N.; Suguna, K. |
Report |
Apr 1, 2009 |
4446 |
Static versus. dynamic elastic moduli of multiphase polymeric composite materials. |
Luca, Dana Motoc; Cerbu, Camelia; Soica, Adrian |
Report |
Jan 1, 2009 |
1145 |
Toughening modification of PLLA/PBS blends via in situ compatibilization. |
Wang, Ruyin; Wang, Shifeng; Zhang, Young; Wan, Chaoying; Ma, Piming |
|
Jan 1, 2009 |
4421 |
Concurrent physical aging and degradation of crosslinked coating systems in accelerated weathering. |
Shi, Xiaodong; Fernando, B.M.Dilhan; Croll, Stuart G. |
|
Sep 1, 2008 |
5861 |
Anti-degradant dose optimization through TGA decomposition kinetics study. |
Chakraborty, S.; Debnath, M.; Dasgupta, S.; Mukhopadhyay, R.; Bandyopadhyay, S. |
|
Jul 1, 2008 |
2272 |
Closing the gap on metals. |
Daykin, Stewart |
|
Mar 1, 2008 |
1660 |
New waterborne acrylic binders for zero VOC paints. |
Geurts, J.; Bouman, J.; Overbeek, A. |
Report |
Mar 1, 2008 |
3635 |
An inverse estimation of initial temperature profile in a polymer process. |
Ranjbar, Ali A.; Mirsadeghi, Mohammad |
Technical report |
Jan 1, 2008 |
4595 |
Numerical investigation and visualization of polymer behavior within a capillary die. |
Beard, M.A.; Tabor, G.R.; Ritchie, S.J.K.; Evans, K.E. |
|
Oct 1, 2007 |
4310 |
Sheet molding compound resins from soybean oil: thickening behavior and mechanical properties. |
Lu, Jue; Wool, Richard P. |
|
Sep 1, 2007 |
6695 |
Biological treatment of aspen strands to improve mold resistance and reduce resin consumption of strand panels. |
Yang, Dian-Qing; Wang, Xiang-Ming; Wan, Hui |
|
Jul 1, 2007 |
4930 |
Curing behavior of urea-formaldehyde resin modified with cooking waste oil-based pMDI prepolymer and its influence on particleboard properties. |
Kang, Eun-Chang; Park, Sang-Bum; Sun, Xiuzhi Susan; Park, Byung-Dae; Park, Heon |
|
Jun 1, 2007 |
6574 |
Modeling particle inflation from poly(amic acid) powdered precursors. II. morphological development during bubble growth. |
Cano, Camilo I.; Clark, Meaghan L.; Kyu, Thein; Pipes, R. Byron |
|
May 1, 2007 |
6050 |
Rubber-toughened polypropylene/acrylonitrile-co-butadiene-co-styrene blends: morphology and mechanical properties. |
Slouf, Miroslav; Kolarik, Jan; Kotek, Jiri |
|
May 1, 2007 |
6028 |
Predictions of two nonlinear viscoelastic constitutive relations for polymers under multiaxial loadings. |
Ellyin, F.; Vaziri, R.; Bigot, L. |
|
May 1, 2007 |
5899 |
Wear of Poly (methyl methacrylate) against a metallic surface in dry conditions. |
Geringer, Jean; Forest, Bernard; Combrade, Pierre |
|
May 1, 2007 |
7250 |
Reprocessing acrylonitrile-butadiene-styrene plastics: structure-property relationships. |
Bai, Xiaojuan; Isaac, D.H.; Smith, K. |
|
Feb 1, 2007 |
5447 |
A new hybrid approach using the explicit dynamic finite element method and thermodynamic law for the analysis of the thermoforming and blow molding processes for polymer materials. |
Erchiqui, Fouad |
|
Nov 1, 2006 |
6012 |
Temperature effect on mechanical properties of toughened silicone resins. |
Wu, Yuhong; McGarry, Frederick J.; Zhu, Bizhong; Keryk, John R.; Katsoulis, Dimitris E. |
|
Nov 1, 2005 |
6031 |
An irreversible thermodynamic model for semicrystalline polymers submitted to multisequence loading at large strain. |
Mrabet, Kais; Rahouadj, Rachid; Cunat, Christian |
|
Jan 1, 2005 |
6113 |
Comparison of four methods for monitoring the kinetics of curing of a phenolic resin. |
Malkin, A.Ya.; Gorbunova, I.Yu.; Kerber, M.L. |
|
Jan 1, 2005 |
4875 |
Cyclic deformation behavior of an epoxy polymer. Part II: predictions of viscoelastic constitutive models. |
Xia, Zihui; Shen, Xinghe; Ellyin, Fernand |
|
Jan 1, 2005 |
4557 |
Barrier and mechanical properties of injection molded montmorillonite/polyesteramide nanocomposites. |
Krook, M.; Morgan, G.; Hedenqvist, M.S. |
|
Jan 1, 2005 |
4158 |
Laminated sailcloth--how stretchy and strong it is? |
Vujasinovic, E.; Dragcevic, Z.; Gersak, J. |
Technical report |
Jan 1, 2005 |
1444 |
Role of Coupling Microscopic and Macroscopic Phenomena During the Crystallization of Semicrystalline Polymers. |
Prabhu, N.; Schultz, J.; Advani, S.G.; Jacob, K.I. |
Statistical Data Included |
Nov 1, 2001 |
6642 |
Processing and Properties of Polymeric Nano-Composites. |
Wang, Hua; Aeng, Changchun; Elkovitch, Mark; Lee, L. James; Koelling, Kurt W. |
Statistical Data Included |
Nov 1, 2001 |
3472 |
Thermal and mechanical properties of a hydroxyl-functional dendritic hyperbranched polymer and trifunctional epoxy resin blends. |
Ratna, D.; Simon, G. P. |
Statistical Data Included |
Oct 1, 2001 |
3545 |
Load-Carrying Ability of Polystyrene Products With Molded-in Holes. |
HEIDWEILLER, A. J.; ZWET, M. J. M. VAN DER |
Statistical Data Included |
Aug 1, 2001 |
4391 |
Nonlinear Viscoelastic and Viscoplastic Response of Glassy Polymers. |
SPATHIS, G.; KONTOU, E. |
|
Aug 1, 2001 |
3773 |
Polyethylene Compounds Containing Mineral Fillers Modified by Acid Coatings. 2: Factors Influencing Mechanical Properties. |
HAWORTH, B.; RAYMOND, C. L.; SUTHERLAND, I. |
Statistical Data Included |
Aug 1, 2001 |
10570 |
Finite Element Analysis of Blow Molding and Thermoforming Using a Dynamic Explicit Procedure. |
MARCKMANN, G.; VERRON, E.; PESEUX, B. |
|
Mar 1, 2001 |
5375 |
Quantitative Measurement of Adhesion Between Polypropylene Blends and Paints by Tensile Mechanical Testing. |
TANG, HOUXIANG; FORAN, BRENDAN; MARTIN, DAVID C. |
|
Mar 1, 2001 |
3337 |
A 3-D Finite Element Model for Gas-Assisted Injection Molding: Simulations and Experiments. |
HAAGH, G. A. A. V.; PETERS, G. W. M.; DE VOSSE, F. N. VAN; MEIJER, H. E. H. |
|
Mar 1, 2001 |
9125 |
Crystallization of Poly(ethylene terephthalate) and Poly(butylene terephthalate) Modified by Diamides. |
BOUMA, KRISTA; GAYMANS, REINOUD J. |
|
Mar 1, 2001 |
5276 |
A New Hypothesis To Describe the Mechanisms Acting in a Welded Joint of Semicrystalline Thermoplastics. |
BONTEN, CHRISTIAN; SCHMACHTENBERG, ERNST |
|
Mar 1, 2001 |
3522 |
Transport Modeling and Thermophysical Properties of Cellular Poly(urethane-isocyanurate). |
PENG, SHUO; FUCHS, ALAN |
|
Mar 1, 2001 |
2975 |
Stress-Initiated Void Formation During Cure of a Three-Dimensionally Constrained Thermoset Resin. |
EOM, YONGSUNG; BOOGH, LOUIS; MICHAUD, VERONIQUE; SUNDERLAND, PAUL; MANSON, JAN-ANDERS |
|
Mar 1, 2001 |
6812 |
Enthalpy Relaxation in Polymeric Glasses. |
DROZDOV, ALEKSEY D. |
|
Mar 1, 2001 |
5705 |
Studies an Epoxy Modified With Recycled Rubber. |
SIPAHI-SAGLAM, E.; KAYNAK, C.; AKOVALI, G.; YETMEZ, M.; AKKAS, N. |
|
Mar 1, 2001 |
3296 |
Elastomer Biaxial Characterization Using Bubble Inflation Technique. I: Experimental Investigations. |
REUGE, N.; SCHMIDT, F. M.; MAOULT, Y. LE; RACHIK, M.; ABBE, F. |
|
Mar 1, 2001 |
3270 |
Elastomer Biaxial Characterization Using Bubble Inflation Technique. II: Numerical Investigation of Some Constitutive Models. |
RACHIK, M.; SCHMIDT, F.; REUGE, N.; MAOULT, Y. LE; ABBE, F. |
|
Mar 1, 2001 |
3754 |
Effect of Poly(acrylic acid)-g-PCL Microstructure on the Mechanical Properties of Starch/PCL Blend Compatibilized With Poly(acrylic acid)-g-PCL. |
KIM, CHANG-HYEON; CHO, KUK YOUNG; PARK, JUNG-KI |
|
Mar 1, 2001 |
4927 |
Weldline Morphology of Injection Molded Modified Poly(phenylene-oxide)/Polyamide-6 Blends. |
SON, YOUNGGON; AHN, KYUNG HYUN; CHAR, KOOKHEON |
|
Mar 1, 2001 |
3276 |
Biaxial Stress Relaxation of High Impact Polystyrene (HIPS) Above the Glass Transition Temperature. |
HUMMEL, SCOTT R.; HOSSAIN, KISHWAR; HAYES, GREGORY T. |
|
Mar 1, 2001 |
4289 |
Izod Impact Strength of a Product Molded of Poly(Vinyl Chloride)/Impact Modifier Containing Voids (Void MOD). |
TAKAKI, AKIRA; NARISAWA, IKUO; KURIYAMA, TAKASHI |
|
Mar 1, 2001 |
3618 |
Properties and Manufacturing of a New Starch Plastic. |
GRAAF, R. A. DE; JANSSEN, L. P. B. M. |
|
Mar 1, 2001 |
7118 |
Rheokinetics and the Influence of Shear Rate on the Trommsdorff (Gel) Effect During Free Radical Polymerization. |
CIOFFI, M.; HOFFMANN, A. C.; JANSSEN, L. P. B. M |
|
Mar 1, 2001 |
3272 |
Morphology of Polymer Blends in the Melting Section of Co-Rotating Twin Screw Extruders. |
POTENTE, H.; BASTIAN, M.; BERGEMANN, K.; SENGE, M.; SCHEEL, G.; WINKELMANN |
Statistical Data Included |
Feb 1, 2001 |
4233 |
A Study of the Effect of PP-g-MA and SEBS-g-MA on the Mechanical and Morphological Properties of Polypropylene/Nylon 6 Blends. |
TUCKER, J. DAVID; LEE, SUNGGYU; EINSPORN, RICHARD L. |
Statistical Data Included |
Dec 1, 2000 |
4240 |
Yield Modeling of an Aliphatic Polyketone Terpolymer in Multiaxial Stress States. |
KARTTUNEN, NICOLE R.; LESSER, ALAN J. |
|
Nov 1, 2000 |
3686 |
Morphological and Mechanical Properties of Polypropylene [PP]/Poly(Ethylene Vinyl Acetate) [EVA] Blends. I. Homopolymer PP/EVA Systems. |
RAMIREZ-VARGAS, E.; NAVARRO-RODRIGUEZ, D.; MEDELLIN-RODRLGUEZ, F. J.; HUERTA-MARTINEZ, B. M.; LIN, J |
|
Oct 1, 2000 |
5568 |
Multilayer Method as a Tool for Depth Dependent Polymer Film Photodegradation Studies. |
NEPOTCHATYKH, O. V.; POWER, J. F. |
|
Aug 1, 2000 |
6562 |
Modeling of the Mechanical Response and Evolution of Optical Anisotropy in Deformed Polyaniline. |
MAKRADI, A.; AHZI, S.; GREGORY, R. V. |
|
Jul 1, 2000 |
4630 |
Spatial and Temporal Control of the Degree of Cure in Polymer Composite Structures. |
SHULL, P. J.; HURLEY, D. H.; M. SPICER, J. W.; SPICER, J. B. |
|
May 1, 2000 |
3431 |
Co-injection Molding: Effect of Processing on Material Distribution and Mechanical Properties of a Sandwich Molded Plate. |
SELDEN, R. |
|
May 1, 2000 |
3993 |
Structure-Property Relationship in Polyurethane Elastomers Containing Starch as a Crosslinker. |
DESAI, SONAL; THAKORE, I. M.; SARAWADE, B. D.; DEVI, SUREKHA |
|
May 1, 2000 |
4238 |
Improvement of the Mechanical Properties of Chitosan Films by the Addition of Poly(ethylene oxide). |
ALEXEEV, V. L.; KELBERG, E. A.; EVMENENKO, G. A.; BRONNIKOV, S. V. |
|
May 1, 2000 |
2498 |
On the Properties and Processing of Polyethylene Terephthalate/Styrene-Butadiene Rubber Blend. |
SANCHEZ-SOLIS, A.; ESTRADA, M. R.; CRUZ, J.; MANERO, O. |
|
May 1, 2000 |
4098 |
Ultrasonic In-Line Monitoring of Polymer Extrusion. |
FRANCA, D. R.; JEN, C.-K.; NGUYEN, K. T.; GENDRON, R. |
|
Jan 1, 2000 |
5865 |
Constitutive Viscoplastic Behavior of Amorphous PET During Plane-Strain Tensile Stretching. |
VIGNY, M.; AUBERT, A.; HIVER, J. M.; ABOULFARAJ, M.; G'SELL, C. |
|
Dec 1, 1999 |
5002 |
The Effects of Roll Drawing on the Structure and Properties of Oriented Poly(Ethylene Terephthalate). |
MATTHEWS, R. G.; AJJI, A.; DUMOULIN, M. M.; PRUD'HOMME, R. E. |
|
Dec 1, 1999 |
4247 |
Mechanical performance. |
Arnold, J.C.; Maund, B. |
|
Jul 1, 1999 |
3543 |
Plasticizing polylactide - the effect of different plasticizers on the mechanical properties. |
Jacobsen, S.; Fritz, H.G. |
|
Jul 1, 1999 |
3026 |
Morphology and mechanical properties. |
Potschke, Petra; Wallheinke, Katrin; Stutz, Herbert |
|
Jun 1, 1999 |
4576 |
Dynamic-mechanical properties and composition of longitudinal polymer liquid crystals. |
Woelke, Ralf; Hess, Michael |
|
Mar 1, 1999 |
3816 |
Effect of compatibilizers on mechanical properties and morphology of in-situ composite film of thermotropic liquid crystalline polymer/polypropylene. |
Bualek-Limcharoen, Sauvarop; Samran, Jareerat; Amornsakchai, Taweechai; Meesiri, Wiriya |
|
Feb 1, 1999 |
3852 |
Long fiber reinforcement of polypropylene/polystyrene blends. |
Inberg, J.P.F.; Hunse, P.H.; Gaymans, R.J. |
|
Feb 1, 1999 |
2765 |
Enhancement of fiber structure formation of a liquid crystalline copolyester via ultra-high speed bicomponent spinning with poly(ethylene terephthalate). |
Radhakrishnan, J.; Ito, H.; Kikutani, T.; Okui, N. |
|
Jan 1, 1999 |
4785 |
Characterization of the fracture toughness of rubber-toughened polypropylene thin plates. |
Marchal, Y.; Oldenhove, B.; Daoust, D.; Legras, R.; Delannay, F. |
|
Dec 1, 1998 |
4186 |
Scratch and mar resistance of filled polypropylene materials. |
Chu, J.; Rumao, L.; Coleman, B. |
|
Nov 1, 1998 |
4804 |
Barium sulfate-filled blends of polypropylene and poly(styrene-co-acrylonitrile) - dynamic mechanical melt state properties and interlayer effects. |
Hammer, Claes O.; Maurer, Frans H.J. |
|
Aug 1, 1998 |
5057 |
Morphology development and the phase inversion mechanism during polymer blending. |
Shih, Chi-Kai |
|
Jun 1, 1998 |
1354 |
Effect of particle morphology on the emulsion stability and mechanical performance of polyolefin modified asphalts. |
Sabbagh, Amiel B.; Lesser, Alan J. |
|
May 1, 1998 |
3591 |
Influence of impurities on mechanical properties of recycled glass fiber reinforced polyamide 66. |
Eriksson, P.-A.; Albertsson, A.-C.; Boydell, P.; Manson, J.-A.E. |
|
May 1, 1998 |
4484 |
Effects of processing conditions and copolymer molecular weight on the mechanical properties and morphology of compatibilized polymer blends. |
Hermes, H.E.; Higgins, J.S. |
|
May 1, 1998 |
5905 |
New test method evaluates release agents. |
Shook, Amber |
|
Jan 1, 1998 |
2900 |
Residual stresses, shrinkage, and warpage of complex injection molded products: numerical simulation and experimental validation. |
Kabanemi, K.K.; Vaillancourt, H.; Wang, H.; Salloum, G. |
|
Jan 1, 1998 |
7581 |
Analysis of high strain hysteresis loss of nonlinear rubbery polymer. |
Kar, Kamal K.; Bhowmick, Anil K. |
|
Jan 1, 1998 |
4484 |
Experimental investigation and modeling of the dissolution of polymers and filled polymers. |
Cao, Zhihua; Kovenklioglu, Suphan; Kalyon, Dilhan M.; Yazici, Rahmi |
|
Jan 1, 1998 |
6652 |
The "sharkskin effect" in polymer extrusion. |
Koopmans, Rudolf J.; Molenaar, Jaap |
|
Jan 1, 1998 |
3486 |
Ambient temperature compaction of polycarbonate powder. |
Vick, Linda W.; Kander, Ronald G. |
|
Jan 1, 1997 |
3725 |
Ultimate properties of polycarbonate blends: effects of inclusion plastic deformation and of matrix phase continuity. |
Kolarik, Jan; Lednicky, Frantisek; Locati, Giancarlo; Fambri, Luca |
|
Jan 1, 1997 |
6507 |
Mechanical behavior of CaCO3 particulate-filled beta-crystalline phase polypropylene composites. |
Tjong, S.C.; Li, R.K.Y.; Cheung, T. |
|
Jan 1, 1997 |
3688 |
Optimization of the coathanger manifold via computer simulation and an orthogonal array method. |
Chen, C.; Jen, P.; Lai, F.S. |
|
Jan 1, 1997 |
2826 |
Morphology and mechanical properties of injection molded articles with weld-lines. |
Kim, Jin Kon; Song, Ju Ho; Chung, S.T.; Kwon, T.H. |
|
Jan 1, 1997 |
5409 |
Hybrid effects on mechanical properties of polyoxymethylene. |
Hashemi, S.; Elmes, P.; Sandford, S. |
|
Jan 1, 1997 |
5991 |
Tensile properties and stress relaxation of polypropylene at elevated temperatures. |
Ariyama, Takashi; Mori, Yasunari; Kaneko, Kenji |
|
Jan 1, 1997 |
5259 |
Stress relaxation behavior of 3501-6 epoxy resin during cure. |
Kim, Yeong K.; White, Scott R. |
|
Dec 15, 1996 |
5086 |
Tensile stresses in the edges of injection moldings: roles of packing pressure, machine compliance, and resin compression. |
Kambour, R.P.; Caraher, J.C.; Schnoor, R.C.; Todt, M.L.; Wang, H.P.; Willey, S.J. |
|
Dec 15, 1996 |
7213 |
The effect of process parameters on the morphology of polypyrrole coatings formed on carbon fibers. |
Wood, Greg A.; Iroh, Jude O. |
|
Oct 15, 1996 |
3085 |
Impact strength improvement of polystyrene by dispersion of rigid particulate. |
Mitsui, S.; Kihara, H.; Yoshimi, S.; Okamoto, Y. |
|
Sep 15, 1996 |
2118 |
Effect of pressure history on shrinkage and residual stresses - injection molding with constrained shrinkage. |
Jansen, K.M.B.; Titomanlio, G. |
|
Aug 15, 1996 |
6996 |
In-mold shrinkage and stress prediction in injection molding. |
Titomanlio, G.; Jansen, K.M.B. |
|
Aug 15, 1996 |
5958 |
Crystallization behavior and mechanical properties of poly(aryl ether ether ketone)/poly(ether imide) blends. |
Frigione, Mariaenrica; Naddeo, Carlo; Acierno, Domenico |
|
Aug 1, 1996 |
6112 |
Equilibrium and dynamic swelling of polyacrylates. |
Bell, Cristi L.; Peppas, Nikolaos A. |
|
Jul 1, 1996 |
4052 |
Predicting weld strength in amorphous polymers. |
Pecorini, Thomas J.; Seo, Kab S. |
|
Jun 1, 1996 |
1572 |
The effect of heat treatment on the microfibrillar network of poly(p-phenylene benzobisthiazole). |
Cohen, Yachin; Gartstein, Efim; Arndt, Karl-Friedrich; Ruland, Wilhelm |
|
May 1, 1996 |
2321 |
Rheotens-mastercurves and drawability of polymer melts. |
Wagner, M.H.; Schulze, V.; Gottfert, A. |
|
Apr 15, 1996 |
3171 |
Polypropylene and a liquid crystalline copolyester based on hydroxynaphthoic acid. |
O'Donnell, Hugh J.; Baird, D.G. |
|
Apr 15, 1996 |
10520 |
Selecting materials for wear resistance. |
Bolvari, Anne E.; Glenn, Sherry B. |
|
Dec 1, 1995 |
2690 |
Origin of the intermediate damping peak in microlayer composites. |
Nazarenko, S.; Haderski, D.; Hiltner, A.; Baer, E. |
|
Nov 15, 1995 |
2905 |
Mixing and morphological transformations in the compounding processes for polymer blends: the phase inversion mechanism. |
Shih, Chi-Kai |
|
Nov 15, 1995 |
3161 |
Factors influencing microstructure formation in polyblends containing liquid crystalline polymers. |
He, Jiasong; Bu, Wensheng; Zhang, Hongzhi |
|
Nov 15, 1995 |
3609 |
Predicting mechanical properties of acrylonitrile-butadiene-styrene terpolymer in injection molded plaque and box. |
Kim, B.H.; Hwang, T.W.; Park, Hern Jin |
|
Aug 15, 1995 |
3599 |
The temperature and strain-rate dependence of mechanical properties in polyoxymethylene. |
Plummer, C.J.G.; Beguelin, Ph.; Kausch, H.-H. |
|
Aug 1, 1995 |
6379 |
Tension effects on the properties of oxidized polyacrylonitrile and carbon fibers during continuous oxidation. |
Tsai, Jin-Shy |
|
Aug 1, 1995 |
2283 |
Morphology and mechanical properties of epoxy resins containing functionalized perfluoroether oligomers. |
Mascia, L.; Zitouni, F.; Tonelli, C. |
|
Jul 15, 1995 |
2926 |
Toughening of unsaturated polyester and vinyl ester resins with liquid rubbers. |
Ullett, Jill S.; Chartoff, Richard P. |
|
Jul 15, 1995 |
7484 |
In situ, quantitative characterization of gelation and fusion mechanism in poly(vinyl chloride) plastisols by small angle light scattering (SALS). |
Kwak, Seung-Yeop |
|
Jul 15, 1995 |
2930 |
Weldline strength in glass fiber reinforced polyamide 66. |
Meddad, A.; Fisa, B. |
|
Jun 15, 1995 |
4328 |
Structure and mechanical anisotropy of cold-rolled ultrahigh molecular weight polypropylene. |
Hibi, Sadao; Niwa, Takahiro; Wang, Chi; Kyu, Thein; Lin, Jar-Shyong |
|
Jun 15, 1995 |
2642 |
Crystal orientation and twinning in cold-rolled ultrahigh molecular weight polypropylene. |
Hibi, Sadao; Niwa, Takahiro; Mizukami, Jun; Wang, Chi; Kyu, Thein |
|
Jun 15, 1995 |
2833 |
Wall thickness uniformity in plastic pipes: computer simulations of the effectiveness of die mandrel offsetting and pipe rotation in combatting sag. |
Pittman, J.F.T.; Whitham, G.P.; Farah, I.A. |
|
Jun 15, 1995 |
4029 |
Fiber structure development in high-speed melt spinning of copolyesters: poly(ethylene terephthalate-co- 1,4-cyclohexylene dimethylene terephthalate). |
Kikutani, Takeshi; Morohoshi, Katsumi; Yoo, Hee Yeoul; Umemoto, Susumu; Okui, Norimasa |
|
Jun 15, 1995 |
3541 |
Effect of holding pressure on orientation distribution. |
Sjonell, Ylva; Terselius, Bjorn; Jansson, Jan-Fredrik |
|
Jun 15, 1995 |
3948 |
Fundamentals. |
Fourche, Georges |
|
Jun 1, 1995 |
7739 |
Application to surface treatments. |
Fourche, Georges |
|
Jun 1, 1995 |
5140 |
Structure/property relationships in polyolefins made by constrained geometry catalyst technology. |
Chum, P.S.; Kao, C.I.; Knight, G.W. |
|
Jun 1, 1995 |
1592 |
A study on interfacial adhesion of poly(vinylidene fluoride) with substrates in a multilayer structure. |
Whang, Wha-Tzong; Cheng, Wen-Hua |
|
Apr 1, 1995 |
3068 |
Time dependent response of polycarbonate and microcellular polycarbonate. |
Wing, Gregory; Pasricha, Arun; Tuttle, Mark; Kumar, Vipin |
|
Apr 1, 1995 |
3997 |
Morphologies of mechanically mixed amorphous blends before and after annealing. |
Andradi, L.N.; Hellmann, G.P. |
|
Apr 1, 1995 |
3432 |
A state variable model for high strength polymers. |
Krempl, Erhard; Bordonaro, Christine M. |
|
Feb 1, 1995 |
3806 |
A constitutive model for the nonlinear viscoelastic viscoplastic behavior of glassy polymers. |
Hasan, O.A.; Boyce, M.C. |
|
Feb 1, 1995 |
7742 |
Mechanical response of beams of a nonlinear viscoelastic material. |
Wineman, Alan; Kolberg, Raymond |
|
Feb 1, 1995 |
2953 |
Stress-strain behavior and dynamic mechanical properties of poly(1,1-dimethyl-1-sila-cis-pent-3-ene), poly(1-methyl-1-phenyl-1-sila-cis-pent-3-ene) and of these polymers after crosslinking with sulfur. |
Chen, Min Wei; Liao, Charles X.; Weber, William P. |
|
Jan 1, 1995 |
2850 |
The effects of physical aging on the brittle fracture behavior of polymers. |
Arnold, J.C. |
|
Jan 1, 1995 |
2656 |
Re-examination of a proposed model for nonisothermal crystallization kinetics. |
Hammami, Ahmed; Mehrotra, Anil K. |
|
Jan 1, 1995 |
1128 |
Some relationships for the orientational drawing of polymers. |
Vlasov, S.V.; Kuleznev, V.N. |
|
Jan 1, 1995 |
3851 |
Investigation of cure in epoxy acrylate resins using rheological and dielectric measurements. |
Radhakrishnan, Sarvepalli; Hayward, D.; Mackinnon, A.J.; Pethrick, R.A. |
|
Jan 1, 1995 |
3165 |
Weld lines and mechanical properties of injection molded polyethylene/polystyrene/copolymer blends. |
Brahimi, B.; Ait-Kadi, A.; Ajji, A. |
|
Aug 15, 1994 |
3752 |
Reaction-induced phase separation during the formation of a polyurethane-unsaturated polyester interpenetrating polymer network. |
Chou, Y.C.; Lee, L.J. |
|
Aug 1, 1994 |
4623 |