Printer Friendly

Marie's peppermint shampoo for little elves.

Coast Southwest, Inc.
Tel: 800-621-0500 * Fax: 714-524-8363

INGREDIENTS                                                 WT%

Phase A

Deionized water                                           64.90
Dissolvine 220-S (Coast Southwest,                         0.10
  Akzo Nobel Functional Chemicals) (Tetrasodium EDTA)
Chemoxide CAW Surfactant (Coast Southwest, Lubrizol        2.00
  Advanced Materials) (Cocamidopropylamine oxide)
Phase B
Endinol SCS (Coast Southwest) (Sodium coco-sulfate)       10.00
Phase C
Endimate 33V (Coast Southwest)                             4.00
  (Caprylic/capric triglyceride)
Jojoba oil (Coast Southwest)                               3.00
  (Simmondsia chinensis (jojoba) seed oil)
Olivatis 13 (Coast Southwest, Medolla Italia, s.r.l.)      2.00
  (Polyglyceryl-3 cetearyl ether olivate)
Palmitic acid (Coast Southwest) (Palmitic acid)            3.00
Cetyl alcohol (Coast Southwest) (Cetyl alcohol)            2.00
Quatrex CT-100 Conditioning Agent (Coast Southwest,        4.00
  Lubrizol Advanced Materials) (Cetearyl alcohol (and)
  cetrimonium bromide)
Phase D
Sharomix DMP (Coast Southwest, Sharon-Laboratories)        0.50
  (Diazolidinyl Urea (and) methylparaben (and)
  propylparaben (and) propylene glycol)
Phase E
Olivatis 15 (Coast Southwest, Medolla Italia, s.r.l.)      4.00
  (Olive oil glycereth-8 esters)
Essential peppermint oil (Coast Southwest)                 0.50
  (Mentha piperita (peppermint) oil)

Procedure: Phase A-Add phase A to main vessel and begin heating to
75-80[degrees]C with sheer mixing. Phase B-At 65-70[degrees]C add
phase B to main vessel with sheer mixing. Continue heating to
75-80[degrees]C. Phase C-In separate vessel, add phase C and heat
to 75-80[degrees]C under sheer mixing. Once both vessels are at
temperature, add phase C to main vessel under high sheer mixing
(500-600 rpm). Begin cool down. Phase D-At 45-50[degrees]C add
phase D to main vessel under sheer mixing. Phase E-Premix phase E
in separate vessel and add to main vessel. Homogenize final formula
(1-2 minutes @ 2000-3000 rpm) for uniformity. Once batch is uniform
transfer to final container. PROPERTIES: pH--5.5-6.5;

Slimming Night Gel
93-638-80-00 * Fax: 34-93-638-93-93

INGREDIENTS                                                  WT%

Phase A
Water                                                      q.s.p.
Water (Aqua), glycerin sodium levulinate, sodium anisate        3
Pentylene glycol                                                3
Phase A1
Carobopol Ultrez 21 polymer                                  0.75
Phase A2
Xanthan gum                                                  0.05
Phase B
Alcohol denat.                                                  5
Phase C
Nocturshape blue ingredient (B1080)                             4
Vanistryl functional ingredient (PD110)                         5
Cylclohexasiloxane, cylcopentasiloxane                          4
Phase D
CI 42090 (Blue 1)                                          0.0001
Phase E
Fragrance                                                     0.1
Phase F
Sodium hydroxide (20% in aqueous solution)                   q.s.

PROCEDURE: Dissolve A in an adequate vessel. Add phase A1 slowly
while stirring until completely dissolved. Add phase B. Add phase
C. Add phase D. Add phase E. Adjust pH to specifications with phase
F. PROPERTIES: pH--5.5.-7.0; Viscosity--1600-6400 cPs (5/50).

Betaine-Free Baby Shampoo AC 238
Innospec Performance Chemicals

INGREDIENTS                                                WT%

Phase A
Water                                                   60.000
Phase B
Pureact WS Cone (Innospec)                              10.000
  (Sodium methyl cocoyl taurate)
Phase C
Pureact LAA (Innospec) (Sodium lauroamphoactetate)      10.000
Pureact Gluco L (Innospec) (Lauryl glucoside)            5.750
Pureact Gluco C (Coco-Glucolside) (Innospec)             5.750
Pureact MS-CG (Innospec)                                 6.100
  (Sodium methyl oleoyl taurante (vegetable derived))
Phase D
Sodium benzoate                                          0.500
Phase E
Citric acid (50%)                                        1.900

PROCEDURE: Charge water (A) into the main vessel. Begin heating the
batch to 40-45[degrees]C. Add Pureact WS Cone (B) with moderate
mixing. Mix until clear. Remove heat. Add Pureact LAA, Preact Gluco
L, Pureact MS-CG (C). Mix until homogeneous. When the temperature
is below 40[degrees]C, add the sodium benzoate (D). Add citric aci
solution (CE) to adjust pH. Note viscosity can be further adjusted
using increments of Preact Gluco L, adjusting the Pureact Gluco L
and C ratios, reducing the pH or adding electrolyte. PROPERTIES:
Appearance--Clear; pH 5.97; Viscosity, cps--2,800 (Brookfield RV #5
@ 50 rpm, 25[degrees]C); % solids--17.53.

Facial Cleanser
Lonza Personal Care

INGREDIENT                                        WT%

Phase A
Water                                            q.s.
Glycerin                                        14.00
Keltrol CG-SFT (CP Kelco                         1.00
  (Xanthan gum)
Seapure Agarose (Lonza) (Agarose)                1.00
Phase B
Standapol ES-2 (BASF) (Sodium laureth sulfate)  16.00
Phase C
Romacil V (Lonza)                                1.00

PROCEDURE: Heat water from phase A in the main kettle and heat to
85[degrees]C, and slowly add premix Glycerin, Keltrol CG-SFT and
Seapure Agarose. Mix for 20 minutes. Begin cooling the batch to
65[degrees]C and slowly add Standaopol ES-2 from phase B. Mix until
homogenous. 3. At 45[degrees]C and add Romacil V from phase C. Mix
until uniform. PROPERTIES: pH: 5.0-6.0.

Skin Lightening Treatment
203-822-9800 * Fax: 203-822-9820


Phase A
Water                                                69.60
Potassium sorbate                                     0.15
Sodium benzoate                                       0.15
Trisodium ethylenediamide disuccinate                 0.05
Phase B
Ammonium acryloydimethyltaurate/VP copolymer          0.30
Phase C
Propanediol                                           1.50
Xanthan gum                                           0.25
Phase D
Cetearyl alcohol, cetearyl glucoside                  2.20
Glyceryl stearate                                     1.25
Glyceryl stearate, PEG-100 stearate                   2.20
Cetearyl alcohol                                      0.50
Neossance Squalane (Amyris, Inc./Centerchem)          7.00
Palmitoyl proline, magnesium palmitoyl glutamate,     0.75
  sodium palmitoyl sarcosinate
Phase E
Cyclopentasiloxane, C30-40 cetearyl dimethicone       2.75
  crosspolymer, PEG/PPG-20/23 dimethicone
Diowgel 600 (Centerchem)                              2.15
Isododecane                                           2.00
Phase F
Diocide (Centerchem)                                  1.00
PMMA 610 (Centerchem)                                 0.70
Apple Eco (Provital, S.A. Centerchem)                 2.50
Melavoid (Provital, S.A. Centerchem)                  3.00

PROCEDURE: Combine phase A to main vessel with agitation. Sprinkle
phase B into phase A while mixing. Allow to hydrate. Increase
agitation as batch thickens. Mix until uniform. Premix phase C and
add to main vessel with mixing. Begin heating batch to
80-85[degrees]C. In separate vessel, combine phase D with mixing.
Heat to 80-85[degrees]C. When vessels have reached 80-85[degrees]C,
add phase D to main vessel. Mix until uniform. Then begin cooling.
Premix phase E. When main vessel reaches 70[degrees]C, add phase E
with mixing. Mix until emulsified. Then cool to 40[degrees]C. When
batch has cooled to 40[degrees]C, add phase F ingredients
individually with mixing between additions. Mix until batch has
cooled to room temperature.

Leave-On Hair Conditioner
(Formulation No. NAD052-11-15A)
The HallStar Company
877-427-4255, 312-285-4494 * Fax: 330-929-3616

INGREDIENTS                                                   WT%
Phase A
Water (Aqua)                                            up to 100
Cetrimonium chloride                                         1.00
Polyquaternium-7                                             0.16
Hydroxypropyl starch phosphate                               4.00
Olivem 300 (HallStar Italia) (Olive Oil PEG-7 esters)        1.00
Phase B
Olivem 800 (HallStar Italia) (Ceteareth-6 olivate)           2.00
Sensolene Care DD (HallStar Italia)                          3.00
  (Lauryl olivate)
HallStar 653 (HallStar) (Cetyl palmitate)                    3.50
Jojoba Oil-Natural Gold (HallStar)                           0.50
  (Simmondsia chinensis (jojoba) seed oil)
Dimethicone                                                  1.00
Phase C
Cyclopentasiloxane                                           3.00
Phase D
Alcohol                                                      3.00
Preservative                                                 q.s.
Fragrance (Parfum)                                           q.s.

PROCEDURE: Prepare phase A, using a suitable dispersion unit, such
as Ultra Turrax, Silverson, etc., to disperse the hydroxypropyl
starch phosphate. Heat to 75-80[degrees]C. Prepare phase B and heat
to 70-75[degrees]C. Add phase B to phase A and homogenize for a few
minutes using a suitable dispersion unit. At 40[degrees]C, add
phases C and D, homogenize for a few minutes, and cool under slow
agitation to room temperature. PROPERTIES (25[degrees]C):
Appearance--Very shiny and soft gel-cream, good spreadability,
silky after-feel; Viscosity--8,000-9,000 mPa-s (10 rpm, Brk.
RVDV-E, Sp.T-C, after 24 h at room temperature); pH--3.5-4.0.

Eye Shadow Primer
215-271-0800 * Fax: 215-271-2621

INGREDIENTS                                                       WT%

Phase A
LexFeel D4 (Inolex)                                             69.50
  (Neopentyl glycol diheptanoate (and) isododecane)
Bentone 34 (Elementis Specialties)                               7.00
(Quaternium-18 bentonite)
Deionized water                                                  0.20
Alcohol SDA 40B                                                  3.30
Phase B
LexFeel N350 (Inolex) (Diheptyl succinate (and)                  7.00
  capryloyl glycerin/sebacic acid copolymer)
Lexorez 200 (Inolex)                                             2.00
  (Trimethylpentanediol/adipic acid/glycerin crosspolymer)
Benzostat (Inolex)                                               1.00
  (Caprylhydroxamic acid (and) benzyl alcohol (and) glycerin)
Phase C
MSS-5003 (Kobo) (Silica)                                         8.00
Titanium dioxide, oil dispersable                                1.00
Sericite mica                                                    1.00

PROCEDURE: Combine phase A ingredients and mix with propeller until
uniform. Add phase B ingredients and mix until uniform. Slowly add
phase C to batch.

Sun Oil Spray
CLR Chemisches Laboratorium Dr. Kurt Richter GmbH
(49) 30 8510 26 0 * Website:

INGREDIENTS                                            WT%

Phase A
Tegosoft TN 02-15 (Evonik) (Alkyl benzoate)      26.300000
Cetiol CC (BASF) (Dicaprylyl Carbonate)          10.000000
Cosmedia (BASF) (DC hydrogenated dimer            4.000000
  dilinoeyl/dimethylcarbonate copolymer)
Uvinul MC 80 (BASF)                              10.000000
  (Ethylhexyl methoxycinnamate)
Uvinul A Plus Granular (BASF)                    10.000000
  (Diethylamino hydroxybenzoyl hexyl benzoate)
Tinosorb S (BASF) (Ethylhexyl triazone)           2.000000
Cetiol C 5 (BASF) (Coco-caprylate)               16.000000
Vitamin F Forte (CLR) (Linoleic acid)             3.000000
Oxynex K Liquid (Merck) (PEG-8 citric acid        0.200000
  tocopherol ascorbyl palmitate ascorbic acid)
Ethanol (96%) (Berkel AHK)
  (Denatured alcohol denat.)                     15.000000

PROCEDURE: Heat up A to 80[degrees]C. Cool down while stirring, add
B and C at room temperature. Stir until homogenous.

Clear Conditioning Shampoo
AkzoNobel Surface Chemistry Personal Care
888-331-6212 * Fax: 908-707-3664

Phase A
Deionized water                                                68.75
Genagen CAB (Clariant Corp.) (Cocamidopropyl betaine)           5.00
Arquad PC 2C-75 (75% active) (AkzoNobel Personal Care)          0.40
(Dicocodimonium chloride (and) isopropyl alcohol)
Phase B
Standapol ES-1 (BASF) (Sodium laureth sulfate)                 24.00
Kathon CG (Dow Chemical)                                        0.05
  (Methylchloroisothiazolinone (and) methylisothiazolinone)
Phase C
Sodium Hydroxide 25% Solution                                   q.s.
  (Sodium hydroxide (and) water)
Phase D
Sodium chloride                                                 1.80

PROCEDURE: Pre-solubilize Arquad PC 2C-75 into CAPB. Add the
mixture into the water and mix until completely homogeneous. Add
ingredients of phase B into phase A following the indicated order.
Mix until completely homogeneous. Adjust the pH with phase C (pH =
5.5-6.5). Adjust viscosity with phase D using 1.8% NaCl.
PROPERTIES: pH--5.5-6.5; Brookfield Viscosity--1000-2000 cps
LVDVII+, sp3, 50rpm, 25[degrees]C; Appearance--Clear liquid.

Intensive Skin Tone Corrector
203-822-9800 * Fax: 203-822-9820

INGREDIENTS                                           WT%

Phase A
Glyceryl stearate citrate                            2.00
Cetyl alcohol                                        1.00
Hydrogenated coco-glycerides isopropyl myristate     2.00
Caprylic/capric triglyceride                         5.00
Squalane                                             1.50
Acrylates/acrylamide copolymer mineral oil &         1.00
Phase B
Water                                               86.40
Panthenol                                            2.00
Acrylates/C10-30 Alkyl acrylate crosspolymer         0.20
Phase C %W/W
Regu-Fade (DSM Nutritional Products/Centerchem)      0.10
Peg-40 hydrogenated castor oil                       1.00
Phase D
Triethanolamine                                      0.20
Preservative                                         q.s.

PROCEDURE: In separate vessel, add components of phase A separately
with mixing while heating to 70-75[degrees]C. Mix until uniform. In
separate vessel, add components of Phase B separately with mixing
while heating to 70-75[degrees]C. Mix until uniform. Dissolve
Regu-Fade in phase C at 50[degrees]C. Regu-Fade must be completely
dissolved before continuing. Add phase B and phase C to phase A,
mix until uniform. Homogenize for two minutes.

Product formulas are supplied by producers of raw materials. Included In some Instances are sources of supply for the raw materials and instructions for preparation and use of the finished product. No guarantee of performance or safety Is implied by Happi. For more complete details, readers should contact the suppliers directly using the telephone number or website provided with each formula. If your company has a formula that you think would be of Interest to readers of Happi, marketers of soaps and detergents; cosmetics and toiletries; fragrances; waxes and polishes; disinfectants and sanitizers and other chemical speciales, we will be pleased to consider it for publication. Address all material to: Formulary Editor, Happi, 70 Hilltop Rd" Ramsey, NJ 07446 USA; Email:
COPYRIGHT 2014 Rodman Publishing
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2014 Gale, Cengage Learning. All rights reserved.

Article Details
Printer friendly Cite/link Email Feedback
Title Annotation:Formulary
Publication:Household & Personal Products Industry
Date:Dec 1, 2014
Previous Article:A tale of two countries: selling anti-aging skin care to US, UK Men.
Next Article:P&G hosts future fabrics forum in Berlin.

Terms of use | Privacy policy | Copyright © 2022 Farlex, Inc. | Feedback | For webmasters |