Magnesium is the lightest of structural metals, weighing 75 per cent less than steel and being around a third lighter than aluminum. The commercial possibilities of the electrolytic method of production were first exploited in 1909 by a German company, Chemische Fabrik Griesheim Elektron.
By the 1920's, the electrolytic process had been worked out on an industrial scale and the metal became available in commercial quantities to justify its use as a structural material. Currently, nearly 500,000 tons of magnesium is produced annually and this figure is increasing as the lightweight properties of the metal are being used in the automotive industry as it moves towards lighter vehicles in order to improve fuel efficiency and cut emissions.
One of the world leaders in magnesium technology is UK-based Magnesium Elektron, a division of the Luxfer Group. The group is an international group of businesses that specialize in the design, manufacture and supply of high performance engineering materials, alloys and semi-fabricated components.
Magnesium Elektron first produced magnesium in 1936 and subsequently became pioneers in the development of magnesium alloy technology. This resulted in the company setting up a research centre to develop enhanced alloy systems. Today, development continues at its technical centre in the UK and through its association with a number of international universities.
Today, the majority of F1 teams utilize the outstanding properties of the ELEKTRON high performance alloys, in particular ELEKTRON 21 & ELEKTON WE43. With technology of magnesium alloys improving, more automotive companies are keen to use the metal.
Further growth is forecast over the next 10 years. In Europe, the increase in using magnesium as a structural lightweight material was initially led by the Volkswagen Group of companies, with the material also being used by other leading manufacturers including DaimlerChrysler (Mercedes Benz), BMW, Ford and Jaguar. Presently, around 14kgs of magnesium are used in the VW Passat, Audi A4 & A6.
Other applications include instrument panels, intake manifolds, cylinder head covers, inner boot lid sections and steering components. Magnesium Elektron is a major supplier of the alloys AZ91D and AM50 and provides complete recycling solutions for Europe's high pressure die casting industry. In 2004, Magnesium Elektron signed a long-term agreement with BMW to supply the Noranda developed A J62 magnesium alloy for use in BMW's latest generation 6-cylinder petrol engines. Today, Magnesium Elektron is the major supplier to the engine program with its ELEKTRON AJ alloy and has production capabilities from both its Manchester (UK) and Litvinov (CZ) operations.
Graham Wardlow, Head of Sales & Marketing for Elektron's UK and CZ operations, states, "During this period of development, Magnesium Elektron developed a major core competence in the AJ alloy technology and this has enabled us to offer BMW a reliable, cost effective solution for the long term supply of the alloy. Our decision to develop the flexibility to manufacture the alloy in both of our European plants is a clear illustration of our commitment to the BMW engine program and Magnesium Elektron's position as a leading supplier of lightweight magnesium alloys to the automotive industry."
Elektron is now involved in other AJ programs in both Europe and North America and is also developing magnesium sheet applications using its hot rolling plant based in St. Louis, North America.
Automotive Industries caught up with Graham Wardlow and Chris Dagger, Divisional Managing Director of Magnesium Elektron, and asked about the future direction of development within the automotive industry.
AI: Apart from BMW, have any other automotive companies shown an interest in increasing their use of magnesium or the AJ alloy system?
ME: BMW set the standard in terms of technology and the application of magnesium. The concept of using an aluminum insert encased with a magnesium jacket provided a huge technological challenge. BMW developed many novel technologies to make the concept work and then applied the concept to its biggest selling unit--the in-line six-cylinder petrol engine.
A number of other companies in Europe and North America are evaluating ELEKTRON AJ for this and other high temperature applications. The benefit of the AJ system relative to other high temperature Mg automotive alloys is that the alloy and supply infrastructure are proven for a large volume commercial application. Supplies today satisfy the production of over 400,000 engines per annum. The price differential today between magnesium and aluminum is also focusing companies to consider magnesium alloys as a real alternative to aluminum. The significant price increases observed in aluminum over the last two years is leading companies to consider direct substitution based upon cost alone.
AI: First it was Volkswagen and now BMW that has made serious investments in magnesium--why is it that German car makers seem more comfortable with the metal?
ME: That is an interesting observation. We don't believe that there is one single reason but more a combination of factors. Firstly, Germany has a long association with the metal. The origins of our own company have links directly with .the original Chemische Fabrik Griesheim-Elektron company at Bitterfeld.
By 1938, shortly after Magnesium Elektron was founded, the Bitterfed site was the world's largest magnesium producing works. In the following years, Volkswagen became a major consumer of magnesium up until the 1980's. Secondly, Germany has always had a very strong die casting industry and this is where, to date, the major growth for the material has been observed. Thirdly, and probably related to the first two points, there are a number of educational establishments within the country that include magnesium technology as part of the Diploma curriculum. As such, engineers take on posts within industry with some knowledge as to the structural benefits of the material.
AI: How has Magnesium Elektron tried to increase magnesium usage amongst automotive companies globally?,
ME: The value of Magnesium Elektron in any automotive program is the application and development of its processing technology and metallurgical know-how. Back in 1995, we worked with VW to develop complete recycling solutions for all the process results coming out of the VW Kassel die casting operation. This directly supported VW at the beginning of their new program, which at the time was the biggest magnesium program in Europe.
Twelve years on, we remain VW's major recycling partner for magnesium. Over this period we have been able to significantly reduce our recycling costs through the 5m [pounds sterling] investment in our new alloying operation in the Czech Republic. With BMW, our processing know-how was also utilized al though the direction here was more on alloy development. Today, our role with BMW is to ensure that a consistently high quality ELEKTRON alloy is delivered to the casting plant on time and to explore other ideas for the application of the material.
Looking forward, our US and UK operations are currently developing a number of automotive sheet applications, some of which use our know-how and manufacturing capabilities in the super plastic forming of magnesium alloys. A number of demonstrator components have already been manufactured with very promising results. Key to moving this forward will be the development of a number of associated technologies to ensure such results can be reproduced on a production scale.
AI: What are some of the problems with magnesium alloys that have made the metal unpopular with auto-makers and what is the long term outlook?
ME: Over the years there have been a number of issues but probably the most significant have been corrosion performance and mechanical strength at elevated temperatures. With regard to the former, the corrosion performance of magnesium was traditionally poor relative to aluminum but in the mid 1980's, work by Dow and Norsk Hydro showed that by reducing the level of impurities in the base alloys, significant improvements in corrosion performance could be made.
This led to a new generation of high purity alloys being developed that are used today. General corrosion performance of such alloys is similar to aluminum but design considerations need to be made to avoid galvanic contact with dissimilar metals. In terms of mechanical strength at temperature, the majority of work in this area was conducted by ELEKTRON for the aerospace industry. Although ELEKTRON alloys were available that far outperformed the properties of aluminum alloys between 150oC-300oC, these alloys were specifically designed for the sand casting process and as such were not suitable for automotive application.
It is only in the last five years that high temperature die casting alloys have been made available. With the successful use of the AJ alloy system by BMW, the future looks promising for the increased application of this lightweight material in the global drive to reduce weight, increase fuel efficiency, and reduce emissions.
|Printer friendly Cite/link Email Feedback|
|Date:||Mar 22, 2007|
|Previous Article:||The automotive industry in Hungary.|
|Next Article:||Telematics flying high in the UAE.|