Printer Friendly

MSHA issues conveyor star-up clarification.

MSHA has issued a Program Information Bulletin (PIB) to emphasize to the metal and nonmetal mining industry the requirements for conveyor start-up warnings involving both manually operated and automatically operated conveyor belt systems at surface and underground mining locations.

Title 30 Code of Federal Regulations (30 CFR) [section] 56.14201, which applies to conveyor systems at all surface metal and nonmetal mines; and 30 CFR [section] 57.14201, which applies to conveyor systems at all underground metal and nonmetal mines, require that conveyor operators either: (a) visually check to make certain all persons are in the clear before starting a conveyor that is visible for its entire length from the starting switch; or Co) provide a visual or audible warning within 30 seconds before starting a conveyor that is not visible for its entire length from the starting switch.

MSHA interprets 30 CFR [section][section] 56.14201 and 57.14201 to apply to conveyors that are operated manually and to conveyors that are operated automatically, including automatic systems controlled by a computer, such as a programmable logic controller. Thus, MSHA enforcement personnel will inspect all automatically operated conveyors to determine compliance with 30 CFR [section][section] 56.14201 and 57.14201.

In determining how to apply file standards to conveyors that are automatically stopped and started as part of a regular production cycle, MSHA enforcement personnel will, on a case-by-case basis, consider the period of time the conveyor is stopped. If such stoppages are for periods of sufficient duration that persons located in the vicinity of the conveyor may reasonably perceive that the conveyor has been turned off intentionally and would anticipate that a warning will be given before the conveyor is restarted, enforcement personnel should apply 30 CFR [section][section] 56.14201 and 57.14201 and take appropriate enforcement action when the required warnings are not given.

Questions concerning the application of 30 CFR [section][section] 56.14201 or 57.14201 to automatically operated conveyor systems should be directed to the appropriate MSHA District Manager for clarification.

COPYRIGHT 2012 Mining Media, Inc
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2012 Gale, Cengage Learning. All rights reserved.

Article Details
Printer friendly Cite/link Email Feedback
Publication:Rock Products
Date:Apr 1, 2012
Previous Article:Diesel study results present new challenge.
Next Article:Crucial conversations lead to improved safety.

Terms of use | Privacy policy | Copyright © 2018 Farlex, Inc. | Feedback | For webmasters