MICROBIOME CARE FOR DRY SKIN BEAUTY CREAM.
INGREDIENTS WT% Phase A Water 72.75 Glycerin 3.40 Ammonium acryloyldimethyltaurate/VP copolymer 0.80 Decyl glucoside 0.15 Caprylyl glycol 0.20 Pentylene glycol 2.00 Phase B Amphisol K (DSM Nutritional Products) 1.00 PEG-9 polydimethylsiloxyethyl dimethicone 1.50 Stearyl alcohol 1.60 C10-18 triglycerides 1.00 Stimu-Tex AS (DSM Nutritional Products/Centerchem) 2.00 Stearyl dimethicone, octadecene 1.00 Cetyl ethylhexanoate 4.50 Cocoglycerides 3.00 Phase C Dimethicone 4.00 Phase D Fragrance 0.10 Syn-Up (DSM Nutritional Products/Centerchem) 1.00
PROCEDURE: Add ingredients of Phase A to vessel with mixing, heat to 90[degrees]C. In a separate vessel, mix Phase B with mixing, heat to 90[degrees]C. Add Phase B to Phase A and homogenize moderately (2 min/8000 rpm). Begin to cool down Phase AB to 60[degrees]C with mixing. Add Phase C. Continue cool down of Phase ABC to 30[degrees]C with mixing. Add Phase D to Phase ABC. Homogenize moderately (1 min/5000 rpm).
Derma IQ Relax Body Lotion OW
CLR - Chemisches Laboratorium Dr. Kurt Richter GmbH
INGREDIENTS WT% Phase A Deionized water 80.55 Phase B Keltrol ECG-BT (CP Kelco) (Xanthan gum) 0.50 Eumulgin SG (BASF) (Sodium stearoyl glutamate) 0.50 Emulgade Sucro Plus (BASF) 2.00 (Sucrose Polystearate cetyl palmitate) Cutina GMS-V (BASF) (Glyceryl stearate ) 1.00 Lanette O (BASF) (Cetearyl alcohol) 1.50 Cetiol LC (BASF) (Coco-caprylate/caprate) 4.00 Cetiol RLF (BASF) 4.00 (Caprylyl -Caprylate/carprate) Cetiol J 600 (BASF) (Oleyl erucate ) 1.50 Copherol F 1300 C (BASF) (Tocopherol) 0.05 Cosmedia SP (BASF) (Sodium polyacrylate) 0.40 Phase C Verstatil BOB (Evonik Dr. Straetmans) 0.80 (Benzyl alcohol, caprylyl glycol, benzoic acid) Annonasense CLR (CLR) 3.00 (Proposed INCI: Annona cherimola fruit extract) Phase D Perfume Oil:Yuzu Rage (IFF) 0.20
PROCEDURE: Heat up A and B to 85[degrees]C separately. Add A to B and homogenize with Ultra Turrax. Cool down while stirring and add C in the given order. Add D as desired.
Crystal Leave-On Conditioner
Tel: 312-385-4494 * 877-427-4255
INGREDIENTS WT% Phase A Water (Aqua) (deionized) to 100 Cetrimonium chloride (25% active) 4.00 Phase B Olivem 1000 (Hallstar) 4.00 (Cetearyl olivate, sorbitan olivate) Oliwax LC (Hallstar) 1.50 (Cetyl palmitate, sorbitan palmitate, sorbitan olivate) Phase C Oliwax (Hallstar) 1.00 (Hydrogenated olive oil, olea curopaea (olive) fruit oil, olea europaea (olive) oil unsaponifiables) Sensolene (Hallstar) (Ethylhexyl olivate) 2.00 Olivem 300 (Hallstar) (Olive Oil PEG-7 Esters) 1.00 Biochemica Avocado Oil Refined (Hallstar) 0.50 (Persea gratissima (avocado) oil) BHT (Hallstar) (BHT) 0.10 Phase D Preservative a.n. Phase E Fragrance (Parfum) a.n. Phase F Sodium hydroxide (10% aqueous) a.n.
PROCEDURE: Heat phase A 75-80[degrees]C. Add phase B under magnetic stirring. Stir for 5 minutes, then homogenize for 1 minute using a suitable dispersion unit (e.g., Silverson, Ultra-Turrax). In a separate vessel, heat phase C to 75[degrees]C. Add to phase AB and homogenize for a few minutes. Warm in an 80[degrees]C oven for 20 minutes, then homogenize for a few minutes. Cool to room temperature under slow agitation. Add phase D and mix, then add phase E and mix. Adjust pH to 5.5-6.5 with F and homogenize. PROPERTIES (25[degrees]C): Appearance--Shiny white cream; Viscosity--8,000-12,000 mPa*s (Brk, RVDV-E, T-B, 10 rpm, after 24 hours at room temperature); pH--5.5-6.5.
On-the-Go Moisturizing Cream
Koster Keunen, Inc.
INGREDIENTS WT% Phase A Deionized water (Aqua) 74.00 Disodium EDTA 0.05 Carbopol 980 (Lubrizol) (Carbomer) 0.15 Tealan 99 (Rita) (Triethanolamine) 0.30 Jeechem BUGL (Jeen) (Butylene glycol) 5.00 Optiphen (Brenntag Specialities) 1.00 (Phenoxyethanol, caprylyl glycol) Phase B Kostol NatureMuls (Koster Keunen) 4.50 (Candelilla/jojoba/rice bran polyglyceryl-3 esters, glyceryl stearate, cetearyl alcohol, sodium stearoyl lactylate) Peg-8 Beeswax (Koster Keunen) (Peg-8 Beeswax) 4.00 Kester Wax K-24 (Koster Keunen) (Lauryl laurate) 6.00 Belsil DM50 (Brenntag) (Dimethicone) 5.00
PROCEDURE: Combine Phase A ingredients one at a time, mixing well after each addition, while heating batch to 80-85[degrees]C. Combine Phase B materials in a separate vessel, heat to 80-85 [degrees]C, and mix until uniform. Slowly add Phase B to Phase A and mix at high speed and 80-85[degrees]C until emulsion is smooth. Cool batch to 45[degrees]C or under and pour into containers. PROPERTIES: Stability--Three months at room temperature, three months at 45 [degrees]C, three freeze/thaw cycles.
Smooth and Shine Hair Conditioner
Coast Southwest, Inc.
800-621-0500 * Fax: 714-524-8363
INGREDIENTS WT% Phase A Deionized water 79.60 Chocolate Ginger & Bourbon Tea Concentrate 0.20 (Coast Southwest, Inc., Tea Guys) (Camellia sinensis (and) roasted cocoa beans (and) zingiber officinale (ginger) root extract (and) cinnamomum cassia bark (and) roasted camellia sinensis lead extract (and) ilex paraguariensis leaf extract (and) zingiber officinale (ginger) root powder (and) flavors (and) dark chocolate chips (and) dark cocoa powder (and) sea salt (and) citric acid) Glycerin (Coast Southwest, Inc.) (Glycerin) 5.00 Endicare DLP-50 (Coast Southwest, Inc.) (Panthenol) 1.00 Sharomix AM24 (Coast Southwest, Sharon-Laboratories) 0.70 (Caprylyl glycol (and)methylpropanediol (and) didecyldimonium chloride (and) polyquaternium-80) Phase B Endimate 33V (Coast Southwest, Inc.) 3.00 (Caprylic/capric triglyceride) Endipure Sweet Almond (Coast Southwest) 3.00 (Ramus amygdalus dulcis (sweet almond) oil) Amla Oil 2.00 (Coast Southwest, International Cosmetic Science Centre) (Campestris (rapeseed) seed oil (and) linum usitatissimum (linseed) seed oil (and) sesamum indicum (sesame) seed oil (and) emblica officinalis fruit extract (and) curcumin) Golden Jojoba Oil (Coast Southwest, Inc., Jojoba Desert) 1.00 (Simmondsia chinensis (jojoba) seed oil) Endisil S-612 (Coast Southwest, Inc., Endisil Inc.) 2.00 (Lauryl phenyl methicone) Fragrance q.s. Phase C Endicare ETP-437 (Coast Southwest) 2.50 (Polyquaternium-37 (and) propylene glycol dicaprylate/dicaprate (and) trideceth-6)
PROCEDURE: Phase A-Add Phase A to main vessel with shear mixing. Q.S. citric acid solution to desired pH between 4.50 to 5.00. Phase B-Add Phase B to Phase A in formula order under continued shear mixing. Phase C-Add Phase C to main vessel with high shear mixing. Batch will thicken. Once dispersed, homogenize (3200 rpm at 1 min./1 kg.) to increase uniformity. Transfer to final container. PROPERTIES: pH--4.5 to 5.0; Viscosity--spindle 04 @ 10 rpm = 15,000 to 20,000 cst
Scalp Soothing Hair Mask
Lonza Consumer Care
INGREDIENTS WT% Phase A Natrosol 330 Plus CS (Ashland) 0.2 (Cetyl Hydroxyethyl- cellulose) Water q.s. Phase B Lactic acid 0.16 Tegoamid S18 (Evonik) 0.5 (Stearamidopropyl Dimethylamine) Genamin BTLF (Clariant) 1.5 (Behtrimmonium chloride) Carsoquat SDQ25 (Stearalkonium chloride) 4.0 Stearyl alcohol (Sigma) 1.65 Cetyl alcohol (Sigma) 3.85 Phase C Natrulon H-6 (Lonza) (PoIyglycerin-6) 1.5 KCI (Fisher) 0.15 Disdoium EDTA (Fisher) 0.1 NAB Butterbur Extract (Lonza) 1.0 (Aqua (and) petasites japonicus root extract) Water 0.5 Phase D Dowcil CE 8411 (Dow Corning) 1.428 (Bis-diisopropanol-amino-PG-propyl dimethicone/bis-isobutyl PEG-14 copolymer (and) polysorbate 20 (and) butyloctanol (and) aqua) Morning Garden (IFF) (Fragrance) 0.3 Glydant Plus Liquid (Lonza) 0.8 (DMDM hydantoin and iodopropynyl butyl-carbamate)
Anti-Humidity Sparkling Hair Serum with AMA Oil
INGREDIENTS WT% Phase A Avocado Oil (Provital/Centerchem) 3.00 AMA-Oil (Provital/Centerchem) 0.50 Cyclopentasiloxane 50.00 Coconut Alkanes, Coco-Caprylate/Caprate 30.05 Tocopherol 0.20 Dicaprylyl ether 16.00 Phase B Fragrance 0.15 Phase C Synthetic Fluorphlogopite, Titanium Dioxide 0.10
PROCEDURE: In main vessel, add components of Phase A separately with gentle mixing until mixture is uniform and trans parent. Add remaining Phases, individually. Mix until uniform before next addition.
Aqua Protection Serum
INGREDIENTS WT% Phase 1 Deionized water 90.58 Disodium EDTA 0.05 Phase 2 Carbopol Ultrez 21 (Lubrizol) 0.30 (Acrylates/C10-30 alkyl acrylate crosspolymer) Phase 3 Sensiva SC 50 (Ethylhexylglycerin) 0.10 Phase 4 Lipomulse 165 (Vantage Specialty Ingredients) 0.84 (Glyceryl stearate (and) PEG-100 stearate) Lipocol C - Natural (Vantage Specialty Ingredients) 0.70 (Cetyl alcohol) Liponate CCC (Vantage Specialty Ingredients) 5.00 (Coco-caprylate/caprate) Lipowax P Pastilles (Vantage Specialty Ingredients) 0.53 (Cetearyl alcohol (and) polysorbate 60) Phenoxyethanol 0.90 Phase 5 Sodium hydroxide (20% solution) 0.40 (Water and sodium hydroxide) Phase 6 Liposhield HEV Melanin 10% Sol'n 0.50 (Vantage Speciality Ingredients) (Menlanin) FD&C Red No. 40 1% solution (Water (and) Red No. 40) 0.10
PROCEDURE: In the main vessel, add Phase 1 ingredients and begin mixing with a propeller. Heat to 80[degrees]C. Sprinkle in Phase 2 ingredient. Mix until fully hydrated and uniform. Add Phase 3 ingredient. Mix until uniform. Premix Phase 4 ingredients. Heat to 80[degrees]C and mix until uniform. Add Phase 4 to main vessel. Emulsify until uniform. Begin to cool batch. At 75[degrees]C, add Phase 5 ingredient. Mix until uniform. Switch to sweep blade and mix at 60-70 rpm. Switch to sweep blade and mix at 60-70 rpm. At 40[degrees]C, add Phase 6 ingredients, one at a time. PROPERTIES: pH--6.28; Viscosity (RVT,TD, 4 rpm, 1 min)--60,000 cps; Stability--Stability is in progress. Stable for 3 weeks (F/T, 45[degrees]C, 25[degrees]C).
Product formulas are supplied by producers of raw materials. Included in some instances are sources of supply for the raw materials and instructions for preparation and use of the finished product. No guarantee of performance or safety is implied by Happi. For more complete details, readers should contact the suppliers directly using the telephone number or website provided with each formula. If your company has a formula that you think would be of interest to readers of Happi, marketers of soaps and detergents; cosmetics and toiletries; fragrances; waxes and polishes; disinfectants and sanitizers and other chemical specialties, we will be pleased to consider it for publication. Address all material to: Formulary Editor, Happi, 25 Philips Parkway Montvale, NJ 07645 USA;
|Printer friendly Cite/link Email Feedback|
|Publication:||Household & Personal Products Industry|
|Date:||Jun 1, 2019|
|Previous Article:||SKIN CARE DEVICES MARKET OUTLOOK.|
|Next Article:||SABINSA'S BIOTECH SITE EARNS USP GMP AUDITED STATUS.|