Printer Friendly

MARKETERS FOCUS.

www.mdtmag.com

Thermal Bonded Tubing

Sunlite Plastics uses heat rather than solvents to create a cleaner, stronger, and more consistent bond throughout the entire length of its tubing. Sunlite has the capabilities to bond different durometers, tubing sizes, and con figurations.

Sunlite Plastics, W194 N11340 McCormick Dr., Germantown, WI 53022.

Write In 140 or Reply online

Precision Instruments

Company offers manufacturers products that meet their needs for precision tubular instruments, specialty needles, cannula and luer fittings. A state-of-the art manufacturing facility assures clients of full compliance with GMP requirements and ISO 9000 guidelines.

Ranfac Corp., 30 Doherty Ave., Avon, MA 02322.

Write In 141 or Reply Online

Threaded Standoffs

Type TSO[TM], TSOS[TM] and TSOA[TM] self-clinching threaded standoffs provide permanent threads in ultra-thin aluminum or steel sheets to enable stacking or spacing P.C. boards and other components.

Penn Engineering & Mfg. Corp., 5190 Old Easton Road, Danboro, PA 18916.

Write In 142 or Reply Online

Burr-Free Cutting & Grinding

Company specializes in burr-free cutting, grinding, lapping, and polishing of small diameter metal tubes, wires, and rods. All metals can be processed for catheters, stents, radiopaque markers, diagnostic probes and other devices. Services include proprietary rotary abrasive cutting, centerless grinding, lapping and wire straightening.

Metal Cutting Corp., 59 Village Park Rd., Cedar Grove, NJ 07009.

Write In 143 or Reply Online

Multi-Layer Tubing

TEEL's multi-layer tubing technology creates designs that achieve properties beyond those of the individual materials by combining from two to six extruded layers into a single composite wall with outside diameters between 0.100 to 4.00 inches.

TEEL Plastics, Inc., 426 Hitchcock St., P.O. Box 455, Baraboo, WI 53913.

Write In 144 or Reply Online

Microminiature Seals

Company offers [MicrOring.sup.a] seals for microminiature applications in more than 2,000 sizes, ranging ITem the largest, with an inside diameter or cross section of 0.039 in. down to 0.008 in. inside diameter and cross section.

Apple Rubber Products, Inc., 310 Erie St., Lancaster. NY 14086.

Write In 145 or Reply Online

Electronics Manufacturing

Customers can enjoy high tech, high quality manufacturing while receiving cost-effective electronic components. This is possible due to company's ongoing commitment to providing cutting-edge methods of manufacturing and product design.

Excelsior Manufacturing, Inc., 1980 Concourse Dr., San Jose, CA 95131.

Write In 146 or Reply Online

Quick Reference Connector Guide

LEMO, maker of high quality circular connectors, is proud to introduce its new quick reference connector guide, The LEMO Connector Selector. The guide breaks down the vast LEMO product line into an easy-to-read product selection tool.

LEMO USA, Inc., P.O. Box 11488, Santa Rosa. CA 95406.

Write In 147 or Reply Online

Gas Plasma Sterilization

The STERRAD system is a low temperature, hydrogen-peroxide gas plasma sterilization system. Patented and completely self-contained, it delivers cycles that are complete in a fraction of the time of competing technologies.

Johnson & Johnson Medical, Inc., 33 Technology Dr., Irvine, CA 92618.

Write In 148 or Reply Online

Linear Actuator

FKR12 Series Linear Actuators feature a compact design, quiet and maintenance-free operation, excellent corrosion resistance and easy installation. The actuators are designed to accept NEMA23 dimension motors/reducers without any adapter flanges.

THK America Inc., 200 E. Commerce Drive, Schaumburg, IL 60173.

Write In 149 or Reply Online

Contract Manufacturing

Company is a comprehensive resource for manufacturers, providing support for product and subassembly manufacturing. Services include program management, component sourcing, production development, testing, and assembly.

UFE, Inc., 1850 South Greely St., Stillwater, MN 55082.

Write In 150 or Reply Online

Polycarbonate Syringes

The Medallion[TM] Syringes are made from polycarbonate and are sturdier than standard syringes. The clear, shatter-resistant barrel material makes it easier to detect air bubbles and fluid levels.

Qosina, 150-Q Executive Drive, Edgewood, NY 11717. 516-242-3000

Write In 151 or Reply Online

Custom Assembly

The Flexifactor system incorporates a variety of work stations, autonomous and manual cells, to enable the rapid assembly of a product. This brochure describes the units available through Mikron, their functions, capabilities, and advantages.

Mikron Corp. Denver, 562 Sable Boulevard, Aurora, CO 80011.

Write In 152 or Reply Online

Operator Interface

TouchLite features a 6,1 inch, 640 x 480 VGA TFT display employing Touch Screen Technology in a rugged housing sealed to IP65 standards. In addition, a "Screen Rotate" function allows the TouchLite to be used in either a horizontal or vertical orientation.

Two Technologies, Inc., 419 Sargon Way, Horsham, PA 19044.

Write In 153 or Reply Online

Custom Plastic Machining

McNeal Enterprises provides prototype through production contract plastic component manufacturing. Capabilities include optical polishing, thermal/chemical polishing, flat lapping, adhesive and cohesive bonding, laminating, coating, silk screening and painting,

McNeal Enterprises, Inc.. 3445 De La Cruz Blvd., Santa Clara, CA 95054.

Write In 154 or Reply Online

Semi-Automated Test System

Complete semi-automated test system is capable of performing AC Hipot, DC Hipot, Continuity and Ground Bond tests with a single connection to the device under test.

Associated Research Inc., 13860 West Laurel Drive, Lake Forest, IL 60045.

Write In 155 or Reply Online

Machine Tools

Company offers medical and biomedical producers a broad range of machine tools and application support to solve parts producing requirements. Escomatic[R] CNC coil fed screw machines handle parts up to 0.36 in. diameter.

Hansco Technologies, 17 Philips Parkway, Montvale, NJ 07645.

Write In 156 or Reply Online

Linear Encoder

The RGH25-UHV brings the high-accuracy of non-contact linear position feedback to scientific equipment, semiconductor manufacturing and other applications performed in ultra high vacuum environments.

Renishaw, Inc., 623 Cooper Court, Schaumburg, 1L 60173.

Write In 157 or Reply Online

Linear Motion Device

Linear motion has traditionally required separate components to handle drive and support/guidance. By eliminating the need for external rail-to-screw alignment, the Screw Rail simplifies the design, manufacture and assembly of motion systems.

Kerk Motion Products Inc.. 1 Kerk Dr.. Hollis, NH 03049.

Write In 158 or Reply Online

Air Bubble Detection

The BD series bubble detection system is used in critical medical applications to detect air, air bubbles, and foam within fluids before they enter a patient's bloodstream, utilizing the characteristics of high frequency acoustic energy for

Introtek, 150 Executive Dr., Edgewood, NY 11717.

Write In 159 or Reply Online

Metal Surgical Devices

Company designs and manufactures innovative high-tech metal surgical devices. Its state-of-the-art design and production capabilities allow customers to receive the highest product quality at the lowest possible cost. Prototype or production quantities available.

DS Mfg., Inc., 2188 Knoll Dr., Ventura, CA 93003.

Write In 160 or Reply Online

Video Measuring Systems

The VMS-121 Video Measuring System is designed for speed and high accuracy. Standard features include 6 in. x 12 in. stage travel, 6 in. focus travel, all axis with cross roller bearings, .00005 in./.001 mm scale resolution. and heavy-duty solid granite base.

Deltronic, 3900 West Segerstrom Ave., Santa Ana, CA 92704

Write In 161 or Reply Online

Silver Conductive Adhesive

EP77M-F is a two part, silver filled electrically conductive adhesive that cures rapidly at room temperature. It has an easy-to-use, one-to-one mix ratio, by weight or volume. The product will set up at ambient temperatures within five to seven minutes even when mixed in very small amounts.

Master Bond, Inc., 154 Hobart St., Hackensack, NJ 07601.

Write In 162 or Reply Online

Latex Rubber Sheeting

A unique and proprietary manufacturing method allows The Hygenic Corp. to produce a natural latex sheeting with exceptionally tight tolerances, flexible gauges and a full spectrum of colors to meet every customer's requirements.

The Hygenic Corp., 1245 Home Ave., Akron, OH 44310.

Write In 163 or Reply Online

Peristaltic Pump

The head 313D Speedy-load[TM] pumphead model is now easier to load. The clamps have been redesigned to hold the tubing better and allow more clearance for tube loading, which will warrant against potential loading errors with surgical equipment.

Watson-Marlow, Inc., 220 Ballardvale St., Wilmington, MA 111887. 508-658-6168

Write In 166 or Reply Online

Contract Manufacturing

Company offers a full line of manufacturing services for surgical and medical disposables, from project planning to product design and development, from prototypes and pilot runs to product and process validation.

Harmac Medical Products, Inc., 2201 Bailey Ave., Buffalo, NY 14211. 716-897-4500

Write In 167 or Reply Online

Custom Electronic Capabilities

Company offers and develops custom electronic assemblies, subassemblies, and systems not only for medical devices, but also for telecommunications equipment, cabling, and electronic delivery.

Burron OEM Division, B. Braun Medical Inc., 824 Twelfth Ave., Bethlehem, PA 18018. 877-4-BURRON

Write In 168 or Reply Online

Copolyester

The Eastar [R] PCTG copolyester exhibits a high level of clarity and demonstrates excellent impact resistance. The material also molds very well, which allows for it to be utilized for intricate applications.

Eastman Chemical Company, PO Box 431, Kingsport, TN 37662. 423-229-1424

Write In 169 or Reply Online

DC Motors

LO-COG[R] 26-mm diameter brush-commutated DC motors offer smooth, quiet operation, and long life. Armatures are skewed to minimize magnetic cogging, even at low speeds, and windings are resin impregnated for greater reliability.

Pittman, 343 (Godshall Drive, Harleysville, PA 19438. 877-PITTMAN

Write In 170 or Reply Online

Infrared Heat Tool

The Glo-Ring is a triple element bench unit with solid state heat controls for shrinking long lengths of heat shrink tubing and other materials in the electronics and medical industry.

The Eraser Company, Inc., PO Box 4961, Oliva Drive, Syracuse, NY 13221. 800-724-0594

Write In 171 or Reply Online

Inspection Systems

Company designs, manufactures, and distributes a wide range of video metrology inspection systems for a variety of non-contact dimensional analysis applications.

RAM Optical Instrumentation, Inc., 1791 Deere Ave., Irvine, CA 92606. 949-253-1462

Write In 172 or Reply Online

Sockets

Springtac[TM] sockets have springwires to provide long-term, highly reliable springwire contacts for several 100,000 mating cycles. Sockets and pins are used for single conductor interconnections or in cylindrical or rectangular multi-contact applications.

ODU-USA, Inc., 451 Constitution Ave., Unit A, Camarillo, CA 93012. 805-484-0540

Write In 173 or Reply Online

Adhesives Dispenser

The 740V dispense valve excels at making consistent, bubble-free deposits of UV-cure adhesives. Its rapid response time, adjustable fluid flow, and instant cutoff assure consistent deposits down to fractions of a microliter.

EFD, 977 Waterman Ave., East Providence, RI 02914. 401-434-1680

Write In 174 or Reply Online

Soldering Systems

Soldering by induction eliminates flames environmental, and safety hazards. Ideal for both low and high temperature applications up to 2,000 [degrees] C, these bench-top and automated console systems are ideal for brazing/soldering, annealing, and curing/bonding.

RDO Enterprises. 120 N. 11th St., Newark. NJ 07107. 973-482-0009

Write In 178 or Reply Online

Grip Valves

The key features of the MV-0180A valve lightweight and fast precision control have been incorporated into the MV-0180-T In addition, the wetted parts of the MV-0180-T are plastic to allow it to dispense cyanoacrylates.

I & J Fisnar, Inc., 2-07 Banta Place, Fair Lawn, NJ 07410. 201-796-1477

Write In 179 or Reply Online

Control System

Procan CT is the latest generation control system for the company's injection molding machines. It offers color touchscreen technology and an intuitive operator interface. It has a multi-tasking, Windows-based operating system and delivers real-time SPC data.

BOY Machines, Inc., 199 Philips Rd., Exton, PA 19341.

Write In 180 or Reply Online

Measuring Systems

The Quick Vision line of noncontact vision measuring systems provides manufacturers with a fast, accurate system that can be integrated into the manufacturing process in an in-line basis.

Mitutoyo America Corporation, 965 Corporate Boulevard, Aurora, IL 60504. 630-820-9666

Write In 181 or Reply Online

Product Protection Devices

Catalog features a complete line of product protection devices, including caps, plugs, edge liners and grommets, wraps and disks, and nettings. It includes a product photo, description, CAD drawing, and stock part specifications listing for each product series

Protective Closures Co., 2150 Elmwood Ave., Buffalo, NY 14207. 716-876-9855

Write In 182 or Reply Online

Sub-Micron Hydrophobic Filters

Two sub-micron hydrophobic filters are designed for medical insufflation. They are high performance, available in two configurations: expanded PTFE and glass matrix.

No. Amer. Sterilization & Packaging Co., 17 Park Drive, Franklin, NJ 07416. Tel: 973-808-9800

Write In 183 or Reply Online

Light Source System

Company offers SolarTec[TM] Light Source system. It has advanced Micro Illumination[TM] technology to be fully compatible with both fiber bundle and single fiber light guides without the need for separate adapters.

Cogent Light Technologies, Inc., 26145 Technology Dr., Santa Clarita, CA 91355. Tel: 800-294-2989

Write In 184 or Reply Online

Product Testers

Inexpensive instruments for tensile and compression testing are available in testing capacities from ounces to 5000 pounds and can be supplied with a wide variety of stock and custom fixturing mechanisms.

Com-Ten Industries, 6405 49th Street North, Pinellas Park, FL 33781. Tel: 800-552-5546

Write In 185 or Reply Online

Manufacturing Solutions

From supplying close tolerance parts to finished devices, MedSource combines design and specialty manufacturing with precision engineering to meet customer requirements.

MedSource Technologies, Inc., 110 Cheshire Lane, Suite 100, Minneapolis, MN 55305.

Write In 186 or Reply Online
COPYRIGHT 2000 Advantage Business Media
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2000 Gale, Cengage Learning. All rights reserved.

Article Details
Printer friendly Cite/link Email Feedback
Publication:Medical Design Technology
Geographic Code:1USA
Date:Mar 1, 2000
Words:2161
Previous Article:Air Pump Used to Enhance the Quality of a Line of Double Breast Pumps.
Next Article:FOCUS ON Adhesives & Coatings.
Topics:

Terms of use | Privacy policy | Copyright © 2020 Farlex, Inc. | Feedback | For webmasters