Printer Friendly

Long-stroke presses for deep-draw parts.

New long-stroke horizontal trim presses from Brown Machine LLC, Beaverton, Mich., are designed with extra stroke length to pre-punch and trim deep-draw containers in a progressive-trim application. The LP model can pre-punch and trim containers up to 8 in. deep while the LDP model can pre-punch and trim up to 12 in. deep.

The increased stroke coupled with precise linear-guide platens eliminates the need for an intermediate trim press to pre-punch. These models are available for sheet widths from 33 to 68 in. Tel: (989) 435-7741 *

COPYRIGHT 2007 Gardner Publications, Inc.
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2007, Gale Group. All rights reserved. Gale Group is a Thomson Corporation Company.

Article Details
Printer friendly Cite/link Email Feedback
Title Annotation:KEEPING UP WITH: Thermoforming
Publication:Plastics Technology
Date:Feb 1, 2007
Previous Article:Nylon 6 targets automotive thermoforming.
Next Article:PP fiber replaces glass in thermoset composites.

Related Articles
Hardware Is the Highlight Of Fall Thermoforming Conference.
Porous Molds' Big Draw.
New Distributor for Cut-Sheet Machines.
Fast, Low-Cost Way to Make Short-Run Molds for Thermoforming.
New Source of Industrial Heavy-Gauge Formers.
Thermoforming shines in exterior vehicle panels. (Thermoforming: Close-Up).
Thermoforming. (What to See at NPE 2003).

Terms of use | Privacy policy | Copyright © 2021 Farlex, Inc. | Feedback | For webmasters