Lighter brackets take the strain: new bracket technology specified for use on Bombardier platforms is driving down fuel and manufacturing costs.
The ambitious target was clearly defined: To replace small to medium-sized machined aluminium and titanium brackets intended to last for the life of the aircraft even though many of these brackets are constantly immersed in fuel. In addition to developing a reliable solution, weight and cost savings were keys to success. With cost savings and streamlined manufacturing among the advantages of using injection-moulded polymers, the new bracket technology is now being introduced to the aircraft industry.
Denroy has adopted a consistent approach to replacing metal brackets with Victrex's high performance polymer solution. "Here at Denroy, we've invested in a manufacturing cell solely dedicated to the production of PEEK brackets. We have now developed optimised moulding processes and invested in new equipment. Victrex's advice and support have been very valuable in the delivery of a durable bracket weighing at least 40% less than the metal design," noted Jim Knowles, sales & marketing manager at Denroy Plastics, who sees PEEK aerospace brackets as a growth area for Denroy going forward.
For Bombardier, the new bracket technology results in significant cost savings in fuel, and consequently helps to benefit the environment through lower C02 emissions. In addition, cost savings during manufacturing can be achieved due to consolidated parts, integration of complex shapes and geometries, elimination of secondary processing (e.g., machining and painting), as well as by reducing both scrap material and production time.
"Victrex is committed to address specific challenges in aerospace such as weight reduction and simplified manufacturing by providing a range of PEEK grades that enable this, including the VICTREX PEEK-ESD polymer. The proven track record of Denroy in the automotive industry has enabled them to adapt their knowledge and experience to the design and production of aerospace components", says Tim Herr, aerospace strategic business unit director at Victrex. Victrex is known for its PAEK-based solutions specified for use in aerospace and has just recently introduced a new hybrid moulding technology for loaded brackets.
In the case of the Denroy brackets, to support design freedom--a critical feature if the brackets were to be optimised to their fullest extent--Victrex used special fillers, which do not break down under shear, i.e. when passing through the restricted gate opening. This allows mouldings to be produced under the optimum moulding conditions without affecting the electrostatic discharge properties of the components.
|Printer friendly Cite/link Email Feedback|
|Title Annotation:||CASE STUDY|
|Date:||Jul 1, 2015|
|Previous Article:||Selecting the correct deburring method: Nigel Willcock, technical specialist at 3M Abrasive Systems Division looks at how deburring has evolved and...|
|Next Article:||Chain reaction.|