Printer Friendly

Lasers measure ID & pitch of coiled tubing.

At NPE2015, LaserLinc, Fairborn, Ohio, is introducing a new system for measuring the diameter and pitch of coiled tubing and other corrugated or convoluted products, such as springs. The measurement system features a scanning laser micrometer mounted on a linear actuator.

LaserLinc's Profile Vu-L linear measurement system is also used for other difficult-to-measure items such as taper length and taper segment angles. The entire length of a part is scanned, ensuring full coverage. Raw dimensional data and/or SPC can be collected on individual parts or batches. A go/no go indicator is presented at the end of the part or during the measurement process.

(888) 707-4852 * laserlinc.com

COPYRIGHT 2015 Gardner Publications, Inc.
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2015 Gale, Cengage Learning. All rights reserved.

Article Details
Printer friendly Cite/link Email Feedback
Title Annotation:EXTRUSION
Publication:Plastics Technology
Date:Mar 1, 2015
Words:109
Previous Article:Modular, compact heat controllers.
Next Article:Software for moldability analysis.
Topics:

Terms of use | Copyright © 2017 Farlex, Inc. | Feedback | For webmasters