Printer Friendly

Keeping your balance: Construction accounting tax tips.

Byline: Bridgetower Media Newswires

Over the summer the IRS released some accounting-for-contracts advice, providing a convenient summary of some of the questions we are most often asked. For instance, what is an accounting method? Every taxpayer reports income and expenses on a tax return according to a method of accounting. An accounting method is a set of rules used to determine when and how to report income and expenses. Basically, accounting methods are divided into two categories: the cash and accrual methods. There are several different accrual methods. You must use an accounting method that clearly shows your income. An accounting method does this when it treats all income and expenses the same from year to year and is appropriate for your line of work. Choosing the right method is important to your business because it affects when you report income and deduct expenses. How do I choose a method? There are special tax rules that control the accounting method you must use for your construction business. Generally, you choose your tax accounting method when you file your first tax return for your business. Your choice of accounting method depends on: The type of contracts you have, Your contracts' completion status at the end of your tax year, and Your average annual gross receipts. Most construction businesses use two different tax-accounting methods: one specifically for their long-term contracts and one generally for everything else. A long-term contract is any contract that is not completed in the same year it's started. Most construction businesses use the accrual method for theirgeneralmethod of accounting. Cash method of accounting One method that some construction contractors can use for both generally and specifically for their long-term contracts is the cash method. However, there are limitations on who can and cannot use this method. There are two situations in which your use of the cash method of accounting can be limited. First, you are not allowed to use the cash method if your business is a corporation, or a partnership with a C corporation, whose average annual gross receipts exceed $5 million. There is no exception to this rule. Second, depending on what type of business you have, you may not be allowed to use the cash method if your total purchases of "merchandise" for the year are "substantial" compared with your gross income for the year. But there are exceptions here. Accrual methods of accounting If you can't use the cash method, you must choose an accrual method of accounting. In the construction industry, there are several specialized accrual methods available, each of which has its own set of rules and limitations. In general, all accrual methods attempt to match the expenses relating to a specific contract to the income from that contract. Choosing an accrual method Choosing a permissible method of accounting for tax purposes involves the three steps discussed below. As your business expands and changes, you might have to use a different method of accounting. You should review the following three steps every year to ensure that you are using a permissible method of accounting for your construction contracts. Step one: Classify all construction contracts as either short-term or long-term A long-term contract is any contract that spans a year-end. If you have a contract that you start on Dec. 26 but do not complete until Jan. 23, you have a long-term contract. Conversely, a short-term contract is any contract you start and finish within one taxable year. As noted above, you can use your general accounting method for your short-term contracts. But then you must choose an accounting for your long-term contracts. The rest of these steps will lead you through the process of choosing a method for long-term contracts. Step two: Classify all long-term contracts as either home-construction or general-construction contracts Home-construction contracts are contracts for work on buildings that have four or fewer dwelling units. Eighty percent or more of the estimated total contract costs must be for the construction, improvement or rehabilitation of these units. If a contract is not a home-construction contract, it is a general-construction contract. For long-term general-construction contracts, there is one more step to take to choose the correct accounting method. Step three: Classify yourself as either a small or large contractor This is a two-part step. The first part calls for measuring your average annual gross receipts for the last three tax years of your construction business. If the amount is $ million or less, you are a small contractor. If it is more than $ million, you are a large contractor andhave no need to consider the second part of this step. Large contractors are required to account for long-term contracts using the percentage-of-completion method, also known as PCM, for their general-construction contracts. Under PCM, contract income is reported annually according to the percentage of the contract in question that has been completed in that year.For example, if a contract is 50 percent complete at the end of the taxable year, then 50 percent of the contract income would be included in taxable income. If you are a small contractor, the second part of this step requires that you separate your long-term general-0construction contracts into two categories. The first category is for contracts that are reasonably likely to be completed within two years from the date the work begins. The second category is for long-term general-construction contracts that you estimate will take two years or more to complete. For these longer-duration contracts, you must use a large-contractor method, even though you are a small contractor. Are you a small or large contractor? To know, first answer these questions: Q: Are your annual gross receipts for the last 3 years $ million or less? If your answer is yes, then answer the next question. If no, then as a large contractor, you must use the PCM for your general construction contracts. Q:Have you any general-construction contracts that you estimate will take more than 2 years to complete? If yes, use the PCM for your longer-duration general-construction contracts. If no, then as a small contractor, you should use either: accrual, exempt percentage of completion method, completed contract method, or PCM for all your general construction contracts. Hereis information about the accounting methods that small contractors can use: Accrual Method of Accounting Income: You include an item in income in the tax year when all events have occurred that fix your right to receive the income and you can determine the amount with reasonable accuracy. Income is generally earned when you have finished the work to your customer's satisfaction and is due when you bill your customer. This means that sometimes you will include an item in income before you have actually received payment. You may use this method for your long-term contracts only if your annual gross receipts do not exceed $ million and the estimated completion time does not exceed 2 years. Exempt percentage of completion method - general rule he EPCM is a method that only affects how your income is computed and reported on your tax return. When you use this method, all G&A and job costs are deducted using the accrual method. There are several advantages to usingEPCM: It is the most accurate way to measure income; It evens out the reporting of income over the extentof a contract; Losses may be recognizedaccording to the percentage of the contract completed; and It is the method preferred by most banks and bonding companies. The main disadvantage is its complexity and the fact that it accelerates income more than other methods. To determine your current year's gross receiptsfor a long-term contract, you multiply its "completion factor" that is, its percentage of completion by its "total contract price" and then subtract the amount of gross receipts you previously reported for this contract. You compute your gross receipts in this way even if you bill the customer for a different amount. Completed contract method With this method, you report all the income from a contract and deduct all the related job costs in the year the project is considered complete. The number of indirect costs that you must characterize as job costs will vary depending on your size. In general, a large homebuilder will have to capitalize a greater number of indirect costs than a small homebuilder or small general contractor. You should consult your tax adviser to learn what types of indirect costs you must capitalize. The advantage of the completed-contract method is that it normally achieves the maximum deferral of taxes. The disadvantages are: The reusulting books and records do not show clear information concerning operations; Income can be bunched into a year when a lot of jobs are completed; and Losses on contracts are not deductible until contracts are completed. It is important to note that the CCM may only be used by small contractors and for any home-construction contracts. Many taxpayers will choose to use PCM as their long-term contract method for their books, mainly so they can give their banks and bonding companies the type of financial statements they prefer. They will then CCM for their tax returns, enabling them to have the maximum deferral of taxes.

Copyright 2017 BridgeTower Media. All Rights Reserved.
COPYRIGHT 2017 BridgeTower Media Holding Company, LLC
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2017 Gale, Cengage Learning. All rights reserved.

Article Details
Printer friendly Cite/link Email Feedback
Publication:The Daily Reporter
Date:Oct 13, 2017
Previous Article:Business Digest for Oct. 16, 2017.
Next Article:Dranzik appointed as permanent director of General Mitchell airport.

Terms of use | Privacy policy | Copyright © 2020 Farlex, Inc. | Feedback | For webmasters