Printer Friendly

KINGSTON LAUNCHES HYPERX DDR2 MEMORY MODULES.

Kingston Technology Company, Inc., has launched HyperX DDR2 533-MHz (PC2-4300) and 675-MHz (PC2-5400) memory modules. Kingston offers HyperX DDR2 modules tested to run at PC2-4300 and PC2-5400. These new HyperX DDR2 unbuffered DIMMs are available in capacities up to 1GB to support the latest generation of computer platforms (actual speed depends on various supported motherboards).

"Kingston's HyperX DDR2 memory features faster speeds of up to 675 MHz, higher data bandwidths, lower power consumption by about 50 percent, and enhanced thermal performance versus DDR," said Louis Kaneshiro, senior technology manager, Kingston. "Gamers and PC enthusiasts will achieve increased performance and better thermal conditions in their rigs from the latest HyperX offering."

Kingston designs and qualifies its HyperX line of products by careful selection of memory components that are assembled and tested for ultimate performance. The Kingston HyperX PC2-4300 modules have been tested to run at low latency timings of 3-3-3-10 and the PC2-5400 support low latency timings of 4-4-4-10. SPD timings are programmed at JEDEC standard latency timings of 4-4-4-12. The new modules also offer a range of advanced features.

HyperX DDR2 Features:

* 1.85 Volts operation, reducing power consumption by about 50 percent.

* Memory signal termination inside the memory chip ("On-Die Termination") to prevent reflected signal transmission errors.

* Operational enhancements to increase memory performance, efficiency and timing margins.

* CAS Latencies: 3 and 4

For more detailed information on HyperX DDR2 technology and Kingston memory products, visit the Kingston Technology Web site at http://www.kingston.com or the HyperX Web site at http://www.kingston.com/HyperX.

About Kingston Technology Company, Inc.

Kingston Technology Company, Inc. is the world's largest independent manufacturer of memory products. Kingston operates manufacturing facilities in Malaysia, Taiwan, China and Fountain Valley, Calif., including Payton Technology Corp., Kingston's back-end processing facility supporting memory packaging, test and logistics. With the advent of Payton, Kingston supports all memory processing functions from receipt of wafer to completed module. Kingston serves a network of distributors, OEMs, and retail customers in more than 3,000 locations worldwide.

Kingston Technology can be found on the World Wide Web at http://www.kingston.com.

For more information, call 800/337-8410 or 714/438-1817.
COPYRIGHT 2004 Worldwide Videotex
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2004 Gale, Cengage Learning. All rights reserved.

Article Details
Printer friendly Cite/link Email Feedback
Publication:Electro Manufacturing
Geographic Code:1USA
Date:Oct 1, 2004
Words:360
Previous Article:STMICROELECTRONICS ADDS 8-MBIT MEMORY CHIP TO PC BIOS FAMILY.
Next Article:LSI LOGIC COMPLETES CHARACTERIZATION OF MEMORY INTERFACE CORES.
Topics:


Related Articles
RIMM MODULES DEBUT FOR INTEL OR840 WORKSTATION MOTHERBOARD.
Micron samples industry's first 4GB DDR2 registered DIMMS.
KINGSTON DDR2 MEMORY MODULES SUPPORT INTEL 915/925 PLATFORMS.
KINGSTON LAUNCHES 667-MHZ DDR2 SO-DIMM MEMORY FOR NOTEBOOKS.
Kingston Technology Rolls Out 800MHz FB-DIMM Memory Kits to the Middle East Supporting Apple Mac Pro Workstations and Xserve Servers.
Kingston Technology Introduces to the Middle East First High-Performance Low-Latency DDR2 Notebook Memory.
Kingston Technology Releases High-Performance 800MHz HyperX FB-DIMMs to the Middle East for Intel Skulltrail Extreme Platform.
Kingston Technology Launches DataTraveler HyperX in the Middle East.

Terms of use | Privacy policy | Copyright © 2021 Farlex, Inc. | Feedback | For webmasters |