Printer Friendly

Articles from Journal of Research of the National Institute of Standards and Technology (January 1, 2014)

1-36 out of 36 article(s)
Title Author Type Words
A framework for reproducible latent fingerprint enhancements. Carasso, Alfred S. Report 4041
A low-cost time transfer receiver for contributions to coordinated universal time. Lombardi, Michael A.; Novick, Andrew N.; Zhang, Victor S. Report 8486
A review of NIST primary activity standards for [sup.18]F: 1982 to 2013. Bergeron, Denis E.; Cessna, Jeffrey T.; Coursey, Bert M.; Fitzgerald, Ryan; Zimmerman, Brian E. 17536
An additive manufacturing test artifact. Moylan, Shawn; Slotwinski, John; Cooke, April; Jurrens, Kevin; Donmez, M. Alkan Report 13542
Analysis of 1-minute potentially available fluoride from dentifrice. Carey, Clifton M.; Holahan, Erin C.; Schmuck, Burton D. Report 4266
Are Bragg peaks Gaussian? Hammouda, Boualem Report 2415
Characterization of metal powders used for additive manufacturing. Slotwinski, J.A.; Garboczi, E.J.; Stutzman, P.E.; Ferraris, C.F.; Watson, S.S.; Peltz, M.A. 10958
Concepts and engineering aspects of a neutron resonance spin-echo spectrometer for the National Institute of Standards and Technology Center for Neutron Research. Cook, Jeremy C. Report 11751
Concepts and engineering aspects of a neutron resonance spin-echo spectrometer for the National Institute of Standards and Technology Center for Neutron Research. Cook, Jeremy C. Report 12563
Concepts and engineering aspects of a neutron resonance spin-echo spectrometer for the national institute of standards and technology center for neutron research. Cook, Jeremy C. Report 14721
Concepts and engineering aspects of a neutron resonance spin-echo spectrometer for the national institute of standards and technology center for neutron research. Cook, Jeremy C. Report 13802
Detection of hazardous liquids using microwaves. Janezic, Michael D.; Splett, Jolene D.; Coakley, Kevin J. Report 5860
Erratum: a general waveguide circuit theory. Williams, Dylan F.; Marks, Roger B. Correction notice 101
Erratum: thermal expansion of platinum and platinum-rhodium alloys. Edsinger, R.E.; Reilly, M.L.; Schooley, J.F. Correction notice 103
Fired cartridge case identification using optical images and the Congruent Matching Cells (CMC) method. Tong, Mingsi; Song, John; Chu, Wei; Thompson, Robert M. 3058
Introduction to special NIST journal of research issue on additive manufacturing. Slotwinski, John 616
Measurement of microsphere concentration using a flow cytometer with volumetric sample delivery. Wang, Lili; Zhang, Yu-Zhong; Choquette, Steven; Gaigalas, A.K. Report 5551
Mechanical properties of austenitic stainless steel made by additive manufacturing. Luecke, William E.; Slotwinski, John A. 5498
New national air-kerma standard for low-energy electronic brachytherapy sources. Seltzer, Stephen M.; O'Brien, Michelle; Mitch, Michael G. 9908
Optical passive sensor calibration for satellite remote sensing and the legacy of NOAA and NIST cooperation. Datla, Raju; Weinreb, Michael; Rice, Joseph; Johnson, B. Carol; Shirley, Eric; Cao, Changyong Report 12340
Optical properties of CdSe/ZnS nanocrystals. Gaigalas, Adolfas K.; DeRose, Paul; Wang, Lili; Zhang, Yu-Zhong 8032
Porosity measurements and analysis for metal additive manufacturing process control. Slotwinski, John. A.; Garboczi, Edward J.; Hebenstreit, Keith M. Report 15164
Post-irradiation study of the alanine dosimeter. Desrosiers, Marc F. Report 5506
Recovery of background structures in nanoscale helium ion microscope imaging. Carasso, Alfred S.; Vladar, Andras E. Report 3371
Retrospective analysis of NIST standard reference material 1450, fibrous glass board, for thermal insulation measurements. Zarr, Robert R.; Heckert, N. Alan; Leigh, Stefan D. Report 10924
Retrospective analysis of NIST standard reference material 1450, fibrous glass board, for thermal insulation measurements. Zarr, Robert R.; Heckert, N. Alan; Leigh, Stefan D. Report 17894
Sensitivity analysis of fatigue crack growth model for API steels in gaseous hydrogen. Amaro, Robert L.; Rustagi, Neha; Drexler, Elizabeth S.; Slifka, Andrew J. 3475
Sustainability characterization for additive manufacturing. Mani, Mahesh; Lyons, Kevin W.; Gupta, S.K. 5293
The dissemination of mass in the United States: results and implications of recent BIPM calibrations of US national prototype kilograms. Kubarych, Zeina J.; Abbott, Patrick J. Report 1998
The metrology of a rastered spot of X rays used in security screening. Hudson, Lawrence T.; Glover, Jack L.; Minniti, Ronaldo 6777
The second National Ballistics Imaging Comparison (NBIC-2). Vorburger, T.V.; Yen, J.; Song, J.F.; Thompson, R.M.; Renegar, T.B.; Zheng, A.; Tong, M. Report 10399
The use of index-matched beads in optical particle counters. Hu, Zhishang; Ripple, Dean C. 4143
Threshold digraphs. Cloteaux, Brian; LaMar, M. Drew; Moseman, Elizabeth; Shook, James Report 4981
Towards a standard mixed-signal parallel processing architecture for miniature and microrobotics. Sadler, Brian M.; Hoyos, Sebastian Report 6377
Translating radiometric requirements for satellite sensors to match international standards. Pearlman, Aaron; Datla, Raju; Kacker, Raghu; Cao, Changyong 1977
WWVB: a half century of delivering accurate frequency and time by radio. Lombardi, Michael A.; Nelson, Glenn K. Report 13976

Terms of use | Copyright © 2018 Farlex, Inc. | Feedback | For webmasters