Printer Friendly

Install Micro Fiber Cable Faster with GMP's AirStream Cable Blowing Machine.


General Machine Products Co. Inc. (GMP), Trevose, PA, introduces the AirStream Cable Blowing Machine to its line of fiber optic cable placing equipment.

Specifically designed to safely install micro fiber cable into pre-installed 0.196- to 0.708-inch OD micro duct, the AirStream will place 0.098- to 0.433-inch OD cable at speeds up to 260 feet per minute.

The AirStream incorporates a tabletop design with easy-to-use ergonomic controls for one-person operation. The unit uses a double belt drive concept, backed by the latest in servo control technology, to provide a secure cable grip with precise torque and speed control. The pushing force, up to 44 pounds maximum, can be adjusted to suit the cable stiffness.

The AirStream uses compressed air to install micro fiber cable into micro duct in both indoor and outdoor environments. Its electrically powered, double belt drive system controls the cable as it is propelled through the micro duct. An electronic monitoring system provides read-outs of speed and distance, and includes an emergency stop capability.

And with the purchase of any GMP fiber cable blowing machine, onsite training is provided at no additional cost.

Compressors are also available to accommodate GMP's complete line of fiber cable blowing machines. 215.357.5500,

COPYRIGHT 2015 Oildom Publishing Company of Texas, Inc.
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2015 Gale, Cengage Learning. All rights reserved.

Article Details
Printer friendly Cite/link Email Feedback
Title Annotation:NEW products: Latest Product Developments
Publication:Underground Construction
Date:Feb 1, 2015
Previous Article:Doosan portable power.
Next Article:New Vacuworx Tough Seal improves performance, provides more vacuum lifts.

Terms of use | Privacy policy | Copyright © 2018 Farlex, Inc. | Feedback | For webmasters