Printer Friendly

Injection molding machines.

A.B. MACHINERY

Series: AB 300-4

Clamp type: Vertical, pneumatic

Clamp size: 2 tons

Injection unit: Vertical, pneumatic reciprocating screw

Injection capacity: 0.25 oz

Applications: Lab testing, jewelry manufacturing

Standard features: Foot-pedal operation. Injection, ejection, and clamping adjustable by electronic timers.

ARBURG, INC.

Series: Allrounder S

Clamp type: Horizontal, fully hydraulic

Clamp-size range: 17 to 440 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 0.5 to 65.6 oz, rates to 119.8 cu in./sec

Applications: Micromolding to large parts.

Standard features: Modular construction, closed-loop regulation of injection unit; graphically programmable, 32-bit Selogica multiprocessor control; swiveling barrel.

Options: Accumulator-assisted injection; cavity-pressure transfer; Vario off-centered injection; convertible (horizontal/vertical) clamp and injection unit; various control expansion packages; electric drive for plastication. Thermoset, LSR, MIM, gas-assist, and MuCell configurations. Multi-component and optical-disc versions.

Series: Allrounder C

Clamp type: Horizontal, fully hydraulic

Injection unit: Hydraulic, reciprocating screw

Clamp-size range: 33 to 240 tons

Injection capacity: 2.3 to 29.1 oz, rates to 70.39 cu in./sec

Applications: Small to large parts

Standard features: Swiveling barrel; Selogica 32-bit multiprocessor control with graphic sequence programming, integrated robot and peripheral programmability.

Options: Accumulator-assisted injection; Vario off-centered injection; vertical parting-line injection; cavity-pressure transfer; thermoset, PET, and multi-component configurations. Electric drive for plastication.

Series: Allrounder K

Clamp type: Horizontal, hydraulic toggle

Injection unit: Hydraulic, reciprocating screw

Clamp-size range: 28 to 77 tons

Injection capacity: 2.3 to 6.1 oz, rates to 12.3 cu in./sec

Applications: Small to medium-size parts.

Standard features: Modular construction, three screw diameters, injection unit convertible to vertical parting-line position; injection unit movable horizontally for off-centered injection (Vario principle) on 77-ton model; Selogica control with graphical sequence programming and integrated robot and peripheral-device programmability.

Options: Vertical clamp or convertible (horizontal/vertical) clamp; electric drive for plastication.

Series: Allrounder A

Clamp type: Horizontal, electric toggle

Clamp size range: 55 to 220 tons

Injection unit: Electric, reciprocating screw

Injection capacity: 8.2 to 15.3 oz, rates to 28.98 cu in./sec

Standard features: Electric screw drive; Selogica control; modular design.

Options: Electric drive on ejector, core pulls, and/or nozzle movement.

Series: Allrounder T

Clamp type: Vertical, fully hydraulic

Injection unit: Hydraulic, reciprocating screw

Clamp-size range: 44 to 220 tons

Injection capacity: 1.3 to 16.4 oz, rates to 18.79 cu in./sec

Applications: Insert molding

Standard features: Rotary table (two- or three-station), four-tiebar clamp, convertible (horizontal/vertical) injection unit; Selogica control with graphical programming.

Options: Versions for thermosets, rubber, LIM. Electric drive for plastication.

Series: Allrounder U

Clamp type: Horizontal, fully hydraulic

Injection unit: Hydraulic, reciprocating screw, closed-loop injection speed regulation

Clamp-size range: 13.5 to 176 tons

Injection capacity: 0.33 to 1.4 oz

Applications: Micromolding, insert molding

Standard features: Modular construction, three screw diam., injection unit convertible to vertical parting-line position, Selogica control with graphical sequence programming and integrated robot and peripheral-device programmability.

Options: Vertical clamp or convertible (horizontal/vertical) clamp.

AUTOJECTORS, INC. DIV. OF MILACRON, INC.

Series: Evolution EV

Clamp type: Vertical, hydraulic C-frame

Clamp-size range: 30 to 280 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 0.73 to 34 oz

Applications: Insert molding

Standard features: Rotary, shuttle, and stationary tables; tiebarless clamp; Vertex ST PC-based, closed-loop controller with 10.4-in. color LCD, storage for 40 mold set-ups, SPC, user-configurable QuickSet screens.

Options: Vertex NT controller (Windows NT) with Internet browser built in.

BATTENFELD OF AMERICA

Series: Plus

Clamp type: Horizontal or vertical, fully hydraulic

Clamp-size range: 28 & 38 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 0.8 to 2.3 oz, rates to 6.5 cu in./sec

Applications: General-purpose and insert molding

Standard features: Two-tiebar clamp, variable-volume pump, Unilog control with graphical interface, integrated control cabinet for space savings.

Series: TM, TMS

Clamp type: Horizontal, hydraulic toggle

Clamp-size range: 55 to 650 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 0.9 to 107.2 oz, rates to 48.6 cu in./sec

Applications: General purpose, thin-wall packaging

Standard features: Five-point toggle, swiveling barrel, Unilog B2 or B4 control. High-speed TMS model has servo-valve for clamp, central lubricating system for moving-platen guide. Accumulator assist for all axes except plasticating.

Series: HM Two-Platen

Clamp type: Horizontal, hydromechanical two-platen

Clamp-size range: 350 to 5500 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 151.3 to 1597 oz, rates to 297.3 cu in./sec

Applications: Large parts

Standard features: Tiebars withdraw from fixed platen during mold opening to facilitate extraction of large parts and mounting large molds.

Options: Electric screw drive.

Series: HM Three-Platen

Clamp type: Horizontal, fully hydraulic

Injection capacity: 3.9 to 14.2 oz

Injection unit: Hydraulic, reciprocating screw

Clamp-size range: 25 to 270 tons

Applications: General purpose

Standard features: Compact design, three-way parts removal, swiveling barrel, variable-volume pumps, twin injection cylinders, Unilog B4 control with color screen, SPC, remote diagnostics, and floppy-disk drive.

Options: Electric screw drive; twin-pump system allows parallel clamp and screw movements and increases injection capacity.

Series: HM Two-Platen

Clamp type: Horizontal, hydromechanical three-platen

Clamp-size range: 320 to 500 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 12.8 to 107.2 oz

Applications: General purpose

Standard features: Swiveling barrel, variable-volume pumps, twin injection cylinders, gentle nozzle-touch with four pulling cylinders on larger units, Unilog B4 control with color screen, SPC, remote diagnostics, and floppy-disk drive.

Options: Twin-pump system allows parallel clamp and screw movements and increases injection capacity. PVC, and mixing screws.

Series: EM

Clamp type: Horizontal, electric toggle

Clamp-size range: 30 to 180 tons

Injection unit: Electric, reciprocating screw

Injection capacity: 3.9 to 7 oz

Applications: General-purpose and precision molding

Standard features: Six servomotors, including two with direct-driven spindles (no belts) to power injection. Unilog B4 control.

Series: Microsystem 50

Clamp type: Horizontal electric tiebarless

Clamp size: 55 tons

Injection unit: Electric, three-stage (two-plunger)

Injection capacity: 0.0169 to 0.169 oz

Applications: Micromolding of parts from 25 mg to 1 g.

Standard features: Clamp positioning accurate to within 0.01 mm. Rotating mold table allows simultaneous injection and ejection. Can inject up to the split line to minimize sprue volume. Clean-room enclosure. Unilog B4 control.

Options: Two-color capability, servo-controlled ejectors, insert molding, powdered metal or ceramic molding.

Series: Vertical R

Clamp type: Vertical, hydraulic

Clamp size: 40 to 270 tons

Injection unit: Horizontal, hydraulic, reciprocating screw

Injection capacity: 1.9 to 13.8 oz

Applications: Insert molding

Standard features: Rotary table for multistation operation.

Series: Vertical V

Clamp type: Vertical, hydraulic

Clamp size: 60 to 200 tons

Injection unit: Vertical, hydraulic, reciprocating screw

Injection capacity: 3.5 to 13.8 oz

Standard features: Unilog B4 control.

Options: Robots and mold-change systems.

BOY MACHINES INC.

Series: Dipronic 22D & 35D

Clamp type: Horizontal,vertical; hydraulic two platen

Clamp-size range: 24.2 & 38.6 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 0.2 to 2.7 oz

Applications: General purpose.

Standard features: Cantilevered clamp end, LED display, variable-volume pump, Dipronic control with digitally controlled pressures, speeds, and timers. Model 22D has two tiebars, 35D has four tiebars. Options. LSR, PVC, thermoset, elastomer, insert, PIM, micro-molding, and ceramic molding versions.

Series: Procan MD models 12M to 90M

Clamp type: Horizontal, vertical; hydraulic two platen

Clamp-size range: 14.2 to 99 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 0.16 to 8.33 oz

Applications: General purpose

Standard features: Cantilevered clamp end, Procan closed-loop control with digital inputs and outputs, LCD display, variable-volume pump.

Options: LSR, PVC, thermoset, elastomer, insert, PIM, micro-molding, and ceramic molding versions; Function Extension Package; Interlace/Floppy Drive Package.

Series: Procan CT models 12A to 90A

Clamp type: Horizontal, vertical; hydraulic two-platen

Clamp-size range: 14.2 to 99 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 0.16 oz. to 8.33 oz.

Applications: General purpose

Standard features: Cantilevered clamp end, variable-volume pump, Procan closed-loop, 32-bit control with color touchscreen, four programmable inputs and outputs, and 128-MB Flash disk for data storage.

Options: LSR, PVC, thermoset, elastomer, insert, PIM, micro-molding, and ceramic molding versions.

Series: Procan MD 22MVV, 22MVH, 35MVV, 55MVV

Clamp tape: Vertical, hydraulic two-platen

Clamp-size range: 24.2 tons, 38.6 tons

Injection unit: Hydraulic, vertical or horizontal reciprocating screw

Injection capacity: 0.2 to 2.7 oz

Applications: Insert molding

Standard features: Procan closed-loop control with digital inputs and outputs, LCD display, variable-volume pump.

Options: LSR, PVC, thermoset, elastomer, PIM, micro-molding, and ceramic molding versions. Function Extension Package, Interface/Floppy Drive Package.

Series: Procan CT 22AVV, 22AVH, 35AVV, 55AVV

Clamp type: Vertical, hydraulic two-platen

Clamp-size range: 24.2 tons, 38.6 tons

Injection unit: Hydraulic, vertical or horizontal reciprocating screw

Injection capacity: 0.2 to 2.7 oz

Applications: Insert molding

Standard features: Variable-volume pump; Procan closed-loop, 32-bit control with four programmable inputs and outputs, color touchscreen, and 128-MB Flash disk for data storage; four programmable inputs and outputs.

Options: LSR, PVC, thermoset, elastomer, PIM, micro-molding, and ceramic molding versions.

CHEN HSONG MACHINERY (CANADA) CO. MEMBER OF CHEN HSONG GROUP

Series: Jetmaster MKIII

Clamp type: Horizontal, hydraulic toggle

Clamp-size range: 132 to 396 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 42.3 to 172.8 oz

Standard features: Jetmaster CPC-II or CH-3.5 PC controller, memory storage for 150 mold set-ups.

Options: Shut-off nozzle, accumulator-assisted injection, core pull, unscrewing mechanism, closed-loop servo control.

Series: Jetmaster MKIV

Clamp type: Horizontal, hydraulic toggle

Clamp-size range: 86 to 237 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 3.6 to 21.7 oz, pressures to 38,600 psi

Applications: High-precision and thin-wall molding.

Standard features: Five-point toggle, extended opening stroke of 11.8 to 21.7 in.

Series: Jetmaster Large (two-platen)

Clamp type: Horizontal, hydromechanical two-platen

Clamp-size range: 550 to 3200 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 75 to 736 oz

Applications: Large parts

Standard features: Twin hydraulic injection cylinders, optical encoder for screw position, CH-3.5 PC controller with LCD, storage for 150 mold set-ups, cycle-count setting for auto-stop.

Options: Accumulator-assisted injection.

Series: Jetmaster Large (three-platen)

Clamp type: Horizontal, hydromechanical three-platen

Clamp-size range: 550 to 3100 tons

Injection unit. Hydraulic, reciprocating screw

Injection capacity: 71.5 to 656.8 oz

Applications: Large parts

Standard features: Twin hydraulic injection cylinders, optical encoder for screw position, CH-3.5PC controller with LCD, storage for 150 mold set-ups, cycle-count setting for auto-stop.

Options: Accumulator-assisted injection.

Series: Minijet

Clamp type: Horizontal, fully hydraulic

Clamp size: 127.6 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 1 to 1.75 oz

Applications: Small precision parts.

Standard features: Twin injection hydraulic cylinders, MJ20D-C controller with LCD, storage for 150 mold set-ups, self-diagnostics.

Options: Robot interface, hydraulic oil-temperature control, shut-off nozzle, two-stage backpressure control, unscrewing mechanism, core pull.

Series: Chen-PET

Clamp type: Horizontal, hydraulic toggle

Clamp-size range: 132 to 396 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 42.3 to 172.8 oz

Applications: PET preforms (8 to 48 cavities)

Standard features: Integrated control of machine, hot-runner mold, robot, and conveyor. Barber-Colman controller, closed-loop injection process control, shut-off nozzle.

Series: Supermaster TP (two-platen)

Clamp type: Horizontal, hydraulic toggle

Clamp-size range: 605 to 3520 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 76 to 736 oz

Applications: Medium to large parts

Standard features: CDC-2000 controller with 10.4 in. color monitor.

Series: Supermaster Double Toggle

Clamp type: Horizontal, hydraulic, double toggle

Clamp-size range: 55 to 495 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 2 to 66.6 oz

Applications: General purpose and specialty molding

Standard features: CDC-2000 controller, 5-point twin toggle mechanism in clamping unit, PED barrel temperature control. Automatic purge function, material and color changing simplified. Integrated low-pressure system forms part of the hydraulic circuit ensuring complete mold safety. Double cylinder injection unit design reduces injection distance.

Series: Supermaster TS

Clamp type: Horizontal, hydraulic, toggle

Clamp-size range: 33 to 495 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 50 to 425 oz

Applications: General purpose

Standard features: High-response BOSCH proportional valves, self-lubricating clamp unit, greaseless moving platen bearing guides, CDC-2000 PC-based controller.

Series: Supermaster HC (hydraulic clamping)

Clamp type: Horizontal fully hydraulic

Clamp-size range: 33 to 495 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 2 to 53 oz

Applications: General purpose, small to mid-sized parts

Standard features: Direct hydraulic clamping systems. Triple safety control of mechanical, electrical and optional devices. High-torque motor capable of various settings for screw rotation. Low-pressure protection system prevents mold damage.

Series: Supermaster Heavy Duty Double Toggle

Clamp type: Horizontal, hydraulic, double toggle

Clamp-size range: 660 to 1485 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 74.8 to 181.8 oz

Applications: General purpose

Standard features: Five point twin toggle mechanism, balanced double hydraulic cylinder provides hold on pressure-eliminating nozzle leakage, mold closing with regeneration circuit shortens cycle time and saves energy.

Series: Supermaster MII (two-platen)

Clamp type: Horizontal, hydromechanical

Clamp-size range: 605,770 tons

Injection unit: Hydraulic, reciprocating screw

Series: Jetmaster ECO

Clamp type: Electric toggle

Clamp-size range: 55 to 140 tons

Injection unit: Electric-driven, reciprocating screw

Injection capacity: 1.6 to 11.3 oz

Applications: General-purpose or precision molding

Standard features: Electric servo motors and ballscrews drive injection, plastication, clamping and ejection. R3000 controller, leak-free injection nozzle, closed-loop pressure control for injection and plastication.

CINCINNATI MILACRON INJECTION MOLDING MACHINES

Series: Magna Tg

Clamp type: Horizontal, hydraulic toggle

Clamp-size range: 170 to 450 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 3.8 to 54 oz

Applications: High-output molding Standard features: Proportional hydraulics, positioning accurate to 0.001 in., closed-loop process control, hydraulic core pull, three-stage air eject.

Options: Thermoset configuration, clamp-tonnage readout, heater burn-out detection, dual programmable cores.

Series: Maxima MG

Clamp type: Horizontal, hydromechanical two-platen

Clamp-size range: 1100 to 4000 tons (custom sizes to 6600 tons)

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 85 to 1054 oz, rates to 141 cu in./sec

Applications: Large-parts

Standard features: Three shot capacities per model, Xtreem controls Direct-acting pancake cylinder on clamp reduces platen deflection 50%.

Options: Windows-based Xtreem NT control, cavity-pressure transfer, tiebar puller, thermoset configuration.

Series: Maxima MM

Clamp type: Horizontal, hydromechanical two-platen

Clamp-size range: 310 to 880 tons

Injection unit: Electric, reciprocating screw

Injection capacity: Rates to 153 cu in./sec

Applications: High-speed molding

Standard features: Accumulator-assisted injection, rotary-spool nozzle shut-off; two-zone water manifolds.

Series: Babyplast

Clamp type: Horizontal, fully hydraulic

Clamp-size range: 20 to 120 tons

Injection unit: Hydraulic, reciprocating-screw

Injection capacity: 0.13 to 0.50 oz

Applications: Small parts

Standard features: New platen concept reduces tooling costs 20-40%.

Series: Magna V

Clamp type: Vertical, hydraulic toggle

Clamp-size range: 30 to 300 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 0.73 to 28 oz, rates to 19.20 cu in./sec

Applications: Insert molding

Standard features: Rotary, shuttle, or stationary table. Closed-loop control.

Options: SPC, robot interface, injection-pressure plotting.

Series: Powerline

Clamp type: Horizontal, electric toggle

Clamp-size range: 220 to 1125 tons

Injection unit: Electric, reciprocating screw or two-stage (750 and 935 tons)

Injection capacity: 21 to 148 oz, injection rate to 89.5 cu in./sec

Applications: Precision molding

Standard features: Air-cooled AC servo motors and ball-screw drives.

Options: Closed-loop feed-throat temperature control.

Series: Roboshot i (from Fanuc Ltd.)

Clamp type: Horizontal, electric toggle

Clamp-size range: 6 to 330 tons

Injection unit: Electric, reciprocating screw

Injection capacity: 0.37 to 1.95 oz, rates from 0.7 to 53.2 cu in./sec

Applications: Specialty molding

Standard features: AC servo motors on all primary axes. Ball-screw operation for injection. Artificial-intelligence controls for screw recovery, injection profiling, and mold protection. Clamp and ejector positioning accuracy to +/-0.0004 in.

Options: High-speed injection and ejection.

Series: E-PET

Clamp type: Horizontal, electric toggle

Clamp size: 440 tons

Injection unit: Electric, two-stage

Injection capacity: 110 oz

Applications: PET preforms

Standard features: 840 x 840 mm tiebar spacing; Internet-ready Xtreem NT control (all-PC) with touchscreen interface; plunger with rotating screw tip (prevents material hang-up); high-speed ejection (400 mm/sec).

DEMAG PLASTICS GROUP

Series: Caliber

Clamp type: Horizontal, hydromechanical two-platen

Clamp-size range: 500 to 4400 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 29.6 to 759.9 oz, rates to 128.2 cu in./sec

Applications: Medium to large parts

Standard features: Clamp daylight up to 145.3 in., tiebar spacing up to 85.8 by 65.9 in. Retractable tiebars, fixed-volume vane pumps, Pathfinder 3000 closed-loop control.

Options: Pathfinder 5000 controls with communications and SPC capability plus guided set-up and troubleshooting programs. Variable-speed electric pump drive. Swing-away barrel. Feed-throat temperature control.

Series: HT

Clamp type: Horizontal, hydraulic toggle Injection unit: Hydraulic, reciprocating Screw

Clamp-size range: 85 to 650 tons

Injection capacity: 2.3 to 39.1 oz

Applications: General purpose

Standard features: Pivoting injection unit, digital control of ejector speed and pressure, water-cooled feed throat with temperature monitor, clamp daylight up to 69.5 in., tiebar spacing up to 53 in. sq.

Options: Electric screw drive, variable-speed pump drive.

Series: IntElect

Clamp type: Horizontal, electric toggle

Clamp-size range: 50 to 280 tons

Injection unit: Electric, reciprocating screw

Injection capacity: 1.1 to 40.3 oz, rates to 27.9 cu in./sec

Applications: Specialty products

Standard features: AC servo drive, belt, and ballscrews operate clamp, injection, plastication, and ejection. Three-way part removal; Pathfinder control with 12-in. touchscreen; controller recognizes barrel size and calibrates controls screens.

Series: Praxis

Clamp type: Vertical, hydraulic toggle

Clamp-size range: 280 to 380 tons (future models down to 60 tons)

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 8.5 to 40.3 oz, rates up to 23.5 cu in./sec

Applications: Insert molding

Standard features: Two- or three-station rotary table with oscillating capability; four screw sizes per model; single-point-adjustable injection centerline.

Options: Overmolding, multi-component capability.

Series: Newbury

Clamp type: Vertical, hydraulic monotoggle

Clamp-size range: 30 to 400 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 1.7 to 59.2 oz, rates to 19.7 cu in./sec

Applications: Insert molding

Standard features: C-frame clamp for multi-station (shuttle or rotary) design or four tiebars for single station (large parts). Four screw/barrel choices for each model, four motor/pump choices.

Options: Closed loop clamp-tonnage control; cavity-pressure based cutoff; PVC or thermoset kits.

Series: El-Exis S

Clamp type: Horizontal, hydraulic toggle

Clamp-size range: 66 to 600 tons

Injection unit: Hydraulic, reciprocating screw with accumulator, electric screw drive

Applications: High-speed, thin-wall packaging

Standard features: NC4 control. AC servo motor drives a self-contained hydrostatic (hydraulic) drive for the toggle clamp. Central hydraulic system with an accumulator powers injection, ejection, core pulls, nozzle touch.

Series: System

Clamp type: Horizontal hydraulic toggle

Clamp-size range: 27.5 to 462 tons

Injection unit: Hydraulic, reciprocating screw

Applications: General purpose

Standard features: Modular design, accumulator-assisted injection with servovalve, allows simultaneous movement of screw and clamp.

Series: Extra

Clamp type: Horizontal, fully hydraulic, toggle

Clamp-size range: 28 to 220 tons

Injection unit: Horizontal, reciprocating screw (electronically controlled DFE pump and proportional valve)

Applications. Small parts, general-purpose

Standard features: NC4 control, electronically controlled DFE pump and proportional valve for injection.

Series: Vertical

Clamp type: Vertical, fully hydraulic

Clamp-size range: 40 to 715 tons

Injection unit: Horizontal or vertical, reciprocating screw

Applications: Insert molding

Standard features: Rotary table turns 120 or 180 degrees or other amount, core-pull valves mounted on rotary table, triple pump set (one variable-volume), moving upper platen.

Series: Titan

Clamp type: Two-platen hydromechanical

Clamp-size range: 1000 to 3300 tons

Injection unit: Horizontal hydraulic

Injection capacity: 16.5 to 521.7 oz

Applications: Large parts

Standard features: Non-contact ultrasonic stroke-measurement for clamp and injection units. NC4 control with Ergocontrol operator terminal. Long-travel tiebar retraction supervised by separate control page. Choice of hydraulic or electrical drives for screw. Clamping system with two movement cylinders and split caliber locking on four tiebars.

Options: Core pull on moving platen. Accumulator-assisted injection.

DIMA, INC.

Series: DMH

Clamp type: Horizontal, hydromechanical two-platen

Clamp-size range: 270 to 5500 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 86 to 882 oz

Applications: Mid-size to large parts

Standard features: Closed-loop control, automatic clamp-pressure setting.

Series: DMT

Clamp type: Horizontal, hydraulic toggle

Clamp-size range: 85 to 650 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 3.9 to 90.2 oz

Applications: General purpose

Standard features: LCD display, closed-loop proportional-valve control.

Options: SPC, ejection on-the-fly.

Series: Dima II

Clamp type: Two-platen hydromechanical

Clamp-size range. 650 to 5000 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 86 to 1267 oz

Applications: Large parts

Standard features: High-precision tiebar-separation lock system allows for installation of large molds. Platen designed with ultra rigidity using structural analysis.

Series: Pro-P

Clamp type: Horizontal, hydraulic, double toggle

Clamp-size range: 25 to 850 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 29 to 124 oz

Applications: General-purpose

Standard features: Mold memory storage system, self-diagnostics, simple production controls with elapsed-cycle-time display and adjustable shot counter.

ENGEL

Series: Victory

Clamp type: Horizontal, hydraulic tiebarless

Clamp-size range: 28 to 660 tons

Applications: General purpose

Injection unit: Hydraulic, reciprocating screw

Standard features: Improved mold access, more room for larger molds, core pulls, etc., modular.

Options: LSR/LIM, multi-injection, gasmelt/watermelt, foammelt, PIM.

Series: E-Motion

Clamp type: Horizontal, electric tiebarless toggle

Clamp-size range: 60 to 385 tons

Injection unit: Electric, reciprocating screw

Standard features: Five-point toggle clamp with C-frame; mixing control during plastication; direct (beltless) servo clamp drive.

Options: LSR/LIM version, X-Melt (expansion molding) process.

Series: Speed

Clamp type: Horizontal, hydraulic toggle

Clamp-size range: 135 to 550 tons

Injection unit: Hydraulic, reciprocating screw

Applications: General purpose, fast cycling

Standard features: Up to 1000 mm/sec injection speed. Five-point double toggle clamp, easy mold-height adjustment, sensitive mold protection, controls integrate robot and auxiliaries.

Series: Classic

Clamp type: Horizontal, hydraulic toggle

Clamp-size range: 385 to 1000 tons

Applications: Large parts

Injection unit: Hydraulic, reciprocating screw

Standard features: Five-point double toggle clamp, easy mold-height adjustment, sensitive mold protection, controls integrate robot and auxiliaries.

Options: Electric screw drive.

Series: Duo

Clamp type: Horizontal, hydromechanical two-platen

Clamp-size range: 720 to 6000 tons

Injection unit: Hydraulic, reciprocating screw

Applications: Large parts

Standard features: Screw diam. from 70 to 260 mm, automatic tiebar retraction.

Options: Electric screw drive, extended daylight or mold-height range.

Series: Insert

Clamp type: Vertical, fully hydraulic

Clamp-size range: 30 to 300 tons

Injection unit: Hydraulic or electric, reciprocating screw

Applications: Insert molding

Standard features: Horizontal or vertical injection, two- or three-position rotary table or shuttle, quick mold change, quick barrel change, single-point height adjustment for injection unit, EC 100 control.

Series: macPET

Clamp type: Hydraulic, toggle

Clamp-size range: 275 to 550 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 143 to 329 oz

Applications: PET preforms

Standard features: Clamping by servo-controlled variable-volume pumps and hydraulic accumulator for fast lock-up time. Patented holding-pressure mechanism.

ETTLINGER KUNSTSTOFFMASCHINEN GMBH

Series: D-I-M

Clamp type: Horizontal or vertical, hydraulic tiebarless

Clamp size: 11 tons

Injection unit: Hydraulic, horizontal or vertical two-stage

Injection capacity: 0.1 to 4.5 g

Applications: Micromolding

Standard features: In-line screw/plunger; extended heated nozzle serves as a hot sprue.

FERROMATIK MILACRON EUROPE-N.A. DIV. OF MILACRON, INC.

Series: K-Tec, K-Tec S (high-speed)

Clamp type: Horizontal, fully hydraulic

Clamp-size range: 44 to 495 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 21.6 g to 2400 kg (0.8 to 84.7 oz); rates to 223 cu in./sec on S line.

Applications: General purpose or multi-material with optional added injection unit.

Standard features: Swiveling injection unit, three clamp speeds; gas accumulator on high-speed S models.

Options: Screw drive motors with higher speed and torque.

Series: Maxima MV

Clamp type: Horizontal, hydraulic two-platen

Clamp-size range: 220 to 385 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 11.6 to 69.5 oz; rates up to 69.5 cu in./sec

Applications: Large parts

Standard features: modular construction, IQT control.

FORCEPRO

Series: PowerFeed

Clamp type: Spring-rod mechanical clamping and hydraulic

Clamp size: 400-1500 tons

Injection unit: Mark-IM unit features extruder and independent mold clamping

Injection capacity: 1000 to 2500 lb/hr

Applications: General purpose and multicavity molding

Standard features: Up to 20,000 psi injection pressure. Single-feed extruder or inline compounding extruder offered. Platen sizes up to 86 x 142 in.

GAUNGZNOU BORCH MACHINERY CO.

Distr. by: Norwell Plastics, Inc.

Series: Impact BTV-I

Clamp type: Horizontal, hydraulic toggle

Clamp-size range: 80 to 1800 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 4.5 to 434.1

Applications: General-purpose

Standard features: Keba controller, 5-point toggle, linear position transducer for clamping/injection/ejection, auto-purge function, cold-start prevention.

Options: Hydraulic core pull or unscrewing device, extended nozzle, accumulator for high-speed injection, variable-displacement pump, hydraulic oil-temperature control.

Series: Impact BVT-II

Clamp type: Horizontal, hydraulic toggle

Clamp-size range: 60 to 200 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 4.5 to 434 oz

Applications: General-purpose

Standard features: Keba controller, 5-point toggle, linear position transducers for all major operational movements, auto-purge function, cold-start prevention, and gear mechanism for mold adjustment.

Options: Hydraulic core pull or unscrewing device, extended nozzle, accumulator for high-speed injection, variable-displacement pump, hydraulic oil temperature control.

Series: Master BMV-I

Clamp type: Horizontal, hydraulic toggle

Clamp-size range: 80 to 320 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 4.5 to 434 oz

Applications: High-production molding

Standard features: BM-II controller with 10.4-in. color screen, intelligent SPC control, flash card interface, graphic monitoring and analysis.

Series: Lightning BH

Clamp type: Horizontal, hydraulic toggle

Clamp-size range: 15 to 55 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 2.1 to 2.75 oz

Applications: High-speed, small jobs

Standard features: Central lubrication, 4-stage clamp speed and pressure control, variable-volume pumps, injection speed to 150 mm/sec and pressure to 38,860 psi, automatic clamp parallelism adjustment, linear position transducer for clamp, injection and ejection.

Options: Accumulator for 300 mm/sec injection speed, linear guide rail for injection unit, special screw designs for different resins.

Series: Rainbow BTMI

Clamp type: Hydraulic toggle

Clamp-size range: 120 to 480 tons

Injection unit: Horizontal, hydraulic, reciprocating screw

Injection capacity: 1.8 to 23 oz

Applications: Two-shot molding

Standard features: Two injection units, rotary platen, variable-displacement pump on second injection unit, color touchscreen control.

GLUCO INC.

Series: HS

Clamp type: Vertical, fully hydraulic

Clamp-size range: 100 to 300 tons

Injection unit: Hydraulic, horizontal reciprocating screw

Injection capacity: 6 to 14 oz

Applications: Insert molding

Standard features: C-frame clamp, two-position shuttle table with bottom eject.

Series: VS

Clamp type. Vertical, fully hydraulic

Clamp-size range: 10 to 75 tons

Injection unit: Hydraulic, vertical or horizontal reciprocating screw

Injection capacity: 4 to 6 oz

Applications: Insert molding

Standard features: C-frame clamp, nitrided screw.

Options: Shuttle or rotary (2- or 4-station) table, bottom eject, thermoset injection unit.

Series: P

Clamp type: Vertical, pneumatic toggle

Clamp-size range: 20 to 60 tons

Injection unit: Pneumatic, horizontal plunger

Injection capacity: 1.75 to 2.5 oz

Applications: Lab use, LSR, parting-line injection

Standard features: Timed shut-off nozzle. LS models for silicone molding.

Series: PM18

Clamp type: Vertical, pneumatic

Clamp-size range: 18 tons

Injection unit: Vertical, pneumatic plunger

Injection capacity: 1 to 1.3 oz, pressures to 12,550 psi

Applications: Product development, short-run insert molding

Standard features: Mold shuttle.

Series: SM (from Multiplas in Taiwan)

Clamp type: Horizontal, hydraulic

Clamp-size range: 50 to 550 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 1.4 to 77.7 oz

Applications: General purpose

Standard features: Six injection speeds & pressures, 4 holding pressures, 3 screw speeds & pressures, 2 carriage-advance speeds & pressures, 4 clamp closing speeds & pressures, 3 clamp opening speeds & pressures, 2 ejector speeds & pressures, 2 core-pull in/out speeds & pressures, hydraulic unscrewing sequence, electro-luminescent display, robot control function.

Options: Bosch proportional valve, ejector and core pull on the fly, closed-loop injection control, high-speed injection mode, 10.4-in. color TFT display.

HAITIAN MACHINERY CANADA CO., LTD. HAITIAN MACHINERY N.A.

Series: HTW

Clamp type: Horizontal, hydraulic toggle

Clamp-size range: 65 to 4000 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 4 to 1110 oz

Applications: General purpose

Standard features: Five-point toggle clamp, water-cooled feed throat, Siemens controller, 10.4-in. color LCD, robot interface, self-diagnostics, closed-loop control of injection speed, holding pressure, screw speed, backpressure. Ture ejection, air blow and core pull on-the-fly.

Series: HTH

Clamp type: Horizontal, hydraulic toggle

Clamp-size range: 200 to 500 tons

Injection unit: Electric

Injection capacity: 10.5 to 59.7 oz

Applications: High-volume/high-speed injection.

HPM

A TAYLOR'S CO.

Series: Freedom

Clamp type: Horizontal, hydromechanical two-platen

Clamp-size range: 460 to 5000 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 14.1 to 1372 oz

Applications: Large parts

Standard features: Seimens PC-based TC03 controller, platen minimizes deflection, tiebars retract with the moving platen; servo and proportional valves, variable-volume pump, color flat-panel control display, SPC, closed-loop control of injection speed, pack and hold pressures, and backpressure.

Options: Rotator for 180[degrees] movement of platen, two-stage injection, accumulator-assisted injection (to 500 cu in./sec).

Series: Modular

Clamp type: Horizontal, fully hydraulic

Clamp-size range: 220 to 4000 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 7 to 1342 oz

Applications: Large parts

Standard features: Modular design includes 12 clamps and 11 injection units; proportional valves, variable-volume pump for clamping, ejection, core-pull; controls with self-diagnostics and SPC.

Options: Accumulator-assisted injection (to 500 cu in./sec), robot interface, structural foam.

Series: V2 (Trueblood)

Clamp type: Vertical, fully hydraulic

Clamp-size range: 6 to 40 tons

Injection unit. Hydraulic, reciprocating screw

Injection capacity: 0.5 to 30 oz, rates to 5 in./sec

Applications: Insert molding for electronic, medical, automotive parts

Standard features: Two tiebar clamp; pull-down cylinder in machine base; shuttle or rotary table; vertical or horizontal injection; Allen-Bradley controls.

Options: Barber-Colman controller, closed-loop injection control, accumulator-assisted injection for up to 15 in./sec. Safety light curtain, computer interface, automation interface, integrated material-loading system, hydraulic core pulls for upper and/or lower mold half, nozzle shut-off.

Series: TB (Trueblood)

Clamp type: Vertical, fully hydraulic

Clamp-size range: 30 to 500 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 1 to 110 oz, rates to 5 in./sec

Applications: Insert molding

Standard features: C-frame clamp, shuttle or rotary table, horizontal or vertical injection, Allen-Bradley or Barber Colman controls, multiple variable-volume pumps.

Options: Closed-loop process control, closed-loop backpressure control, SPC data collection, accumulator-assisted injection up to 15 in./sec, nozzle shutoff, hydraulic core pulls for upper and/or lower mold half, automation interface.

Series: 4C (Trueblood)

Clamp type: Vertical, fully hydraulic

Clamp-size range: 30 to 500 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 1 to 110 oz, rate to 5 in./sec

Applications: Insert molding

Standard features: Four-tiebar clamp, shuttle or rotary table, Allen-Bradley or Barber Colman controls, multiple variable-volume pumps.

Options. Closed-loop process control, closed-loop backpressure control, SPC data collection, accumulator-assisted injection for up to 15 in./sec, nozzle shutoff; hydraulic core pulls for upper and/or lower mold half, automation interface.

HULL INDUSTRIES, INC.

Series: MightyMac

Clamp type: Horizontal, fully hydraulic

Clamp-size range: 25 to 600 tons

Injection unit: Hydraulic, reciprocating screw, or plunger

Applications: Small or large parts Standard features: Smart-Mold closed-loop control system;vacuum-assisted venting.

Series: Parting Line Injection

Clamp type: Vertical, fully hydraulic

Clamp-size range: 15 to 800 tons

Injection unit: Horizontal, hydraulic reciprocating screw, or direct plunger

Applications: Insert molding

Standard features: Four-tiebar clamp, shuttle, outboard ejection (upper and lower), Smart-Mold closed-loop control system.

Options: Thermoset and BMC injection; vacuum-assisted venting, shuttle configuration (2 bottom mold halves, single top half).

HUSKY INJECTION MOLDING SYSTEMS LTD.

Series: Hylectric

Clamp type: Horizontal, hydromechanical two-platen

Clamp-size range: 55 to 1100 tons

Injection unit: Hydraulic reciprocating screw or two-stage with electric screw drive

Injection capacity: Injection rates up to 358 cu in./sec

Applications: Thin-wall medical and technical applications

Standard features: PC-based Polaris control, over 40 different injection-unit configurations, swiveling injection unit, large tiebar spacing. Reflex platen design minimizes deflection, enables molds to be run at lower tonnages.

Series: Quadloc

Clamp type: Horizontal, hydromechanical two-platen

Clamp-size range: 1500 to 8800 tons

Injection unit: Hydraulic, reciprocating screw or two-stage

Standard features: PC-based Polaris control, variable-volume pump, up to six injection-unit choices per clamp size, over 30 injection-unit/clamp-size combinations, expanded daylight for large molds and stack molds. Reflex platen design minimizes deflection.

Series: Index

Clamp type: Horizontal, hydromechanical turret

Clamp-size range: 100 to 600 tons

Injection unit: Hydraulic, reciprocating screw & two-stage

Applications: PET preforms

Standard features: PLC-based controls with PC interface, two- or four-position turret provides extra cooling cycles or cores before ejection.

Series: HyPAC

Clamp type: Horizontal, hydromechanical

Clamp-size range: 300 to 600 tons

Applications: High-speed, thin-wall packaging

Standard features: New injection unit design has 30% higher throughput than Hylectric models and has faster melt acceleration. Control delivers 250 microsec response time.

JSW PLASTICS MACHINERY, INC. SUB. OF JAPAN STEEL WORKS

Series: J-ELIII (small-to-medium size all-electric)

Clamp type: Horizontal, electric toggle

Clamp-size range: 22 to 495 tons

Injection unit: Electric, reciprocating screw

Injection capacity: 0.38 to 53.3 oz

Applications: Precision parts (jewel cases, lenses)

Standard features: Swiveling injection unit, bimetallic cylinder, Syscom 2000 controller with 10.4-in. color LCD touch panel, injection-compression function.

Series: J-ELIII (large all-electric)

Clamp type: Horizontal, electric toggle

Clamp-size range: 605 to 1430 tons

Infection unit: Electric, reciprocating screw

Injection capacity: 33 to 200 oz

Applications: High-precision large parts

Standard features: Syscom 2000 touch-panel control with color LCD, swiveling injection unit, injection driven by twin servomotors.

Series: J-ELIII-UPS

Clamp type: Horizontal, electric toggle

Clamp-size range: 38.5 to 198 tons

Injection unit: Hybrid, reciprocating screw

Injection capacity: 0.38 to 4.3 oz, rates to 1000 mm/sec

Applications: High-speed, thin-wall packaging

Standard features: Electric screw drive, accumulator-assisted injection with servovalve.

Series: JT-ELII

Clamp type: Vertical, electric toggle

Clamp-size range: 22 to 110 tons

Injection unit: Horizontal, electric reciprocating screw

Injection capacity: 0.54 to 4.6 oz

Applications: Insert molding

Standard features: Stationary table or servo-driven turntable; bell-crank toggle for low height.

Series: J-ELIII (small-to-medium-size hydraulic)

Clamp type: Horizontal, hydraulic toggle

Clamp-size range: 55 to 495 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 1.6 to 73.8 oz

Applications: General purpose

Standard features: Variable-volume pump on models up to 110 tons, Syscom controller with color LCD and touch panel.

Options: Accumulator-assisted injection for 308 to 495 tons.

Series: J-ELIII (large hydraulic)

Clamp type: Horizontal, hydraulic toggle

Clamp-size range: 605 to 1760 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 59 to 331 oz

Applications: Large parts for appliances, automotive, electronics

Standard features: Syscom 2000 controller with color LCD and touch panel, SPC/SQC Injection and rotation program control allows up to six injection speed-, injection pressure- and holding pressure adjustments, cold screw start-up prevention.

Options: Offers Ultra large machines from 2860 to 6600 tons (spec. data not available).

Series: J-ELII-SP

Clamp type: Horizontal, hydraulic toggle

Clamp-size range: 198 to 935 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 7.3 to 53.3 oz

Applications: High-speed precision molding

Standard features: Fast mold open/close with accumulator, swiveling injection unit, accumulator-assisted injection with servovalve, SPC/SQC, self-diagnostics.

Series: J-ELII (ultra small hydraulic)

Clamp type: Horizontal, fully hydraulic

Clamp-size range: 19.8 to 33 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 0.4 to 1.3 oz

Applications: Small precision parts

Standard features: Variable-volume pump, injection-compression capability (five compression levels), Syscom 800 controller stores 20 mold set-ups, self-diagnostics, three-way parts removal.

Series: J-ELII (vertical)

Clamp type: Vertical, fully hydraulic

Clamp-size range: 24.2 to 242 tons

Injection unit: Vertical, hydraulic reciprocating screw

Injection capacity: 0.54 to 16.5 oz

Applications: Insert molding

Standard features: Single-station and rotary models, Syscom 800T controller.

Options: Syscom 1000T control, shuttle table.

Series: J-AD

Clamp type: Horizontal, electric toggle

Clamp-size range: 55 to 180 tons

Injection unit: Electric, reciprocating screw

Injection capacity: 0.4 to 11.8 oz

Applications: High-speed, thin-wall packaging

Standard features: Servo circuit has 62 micro-sec response time. Injection speeds of 9.45 to 13.78 in./sec. Injection weight and cushion control, "advanced pressure control," predictive metering control, platen support mechanism and long platen guides for platen parallelism.

KAWAGUCHI INC.

Series: KX

Clamp type: Horizontal, hydraulic toggle

Injection unit: Hydraulic, reciprocating screw

Clamp-size range: 55 to 700 tons

Injection capacity: 5.8 to 78.4 oz

Applications: General purpose

Standard features: PC-based controls, closed-loop pump system.

Series: KXE

Clamp type: Horizontal, electric toggle

Clamp-size range: 55 to 200 tons

Injection unit: Electric, reciprocating screw

Injection capacity: 52 to 334 cc

Applications: General purpose

Standard features: Hydraulic ejection, PC-based controls with 8.5-in. color touchscreen.

KRAUSS-MAFFEI CORP.

Series: EX

Clamp type: Electric, three-platen

Clamp-size range: 55 to 176 tons

Injection unit: Horizontal, electric reciprocating screw

Applications: General-purpose

Standard features: Z-lever clamping unit.

Series: Petform

Clamp type: Horizontal, fully hydraulic

Clamp-size range: 192.5 & 330 tons

Injection unit: Hydraulic, reciprocating screw, two-stage on 330-ton

Injection capacity: 48.2 to 123 oz

Applications: PET preforms, 8 to 72 cavities

Standard features: Turnkey system with mold, servo robot, and four-stage preform-cooling device. Special shut-off valve minimizes crystallinity problems. Plastication during holding phase.

Series: C, C3

Clamp type: Horizontal, hydromechanical two-platen

Clamp-size range: 33 to 715 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 0.4 to 198 oz

Applications: General purpose

Standard features: MC4 control; accumulator assist on larger units.

Options: Closed-loop control, accumulator assist on smaller units. Duroset thermoset models from 44 to 715 tons; Polyset BMC models from 44 to 462 tons.

Series: MX

Clamp type: Horizontal, hydromechanical, two-platen

Clamp-size range: 880 to 4400 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 72.5 to 1392 oz

Applications: Large parts

Standard features: Accumulator-assisted injection, MC5 control, platen guide and support elements for parallelism and low mold wear. Wear-protected plasticating units.

Series: CX

Clamp type: Horizontal, hydromechanical, two-platen

Clamp-size range: 38 to 176 tons

Injection unit: Hydraulic or electric reciprocating screw

Injection capacity: 0.4 oz and up

Applications: General-purpose

Standard features: MC5 control. Injection and ejector systems can be driven electrically or hydraulically. Modular construction allows adaptation to different needs.

Series: KM-80-190CD

Clamp type: Horizontal, hydraulic

Clamp-size range: 88 tons

Injection unit: Hydraulic, reciprocating screw

Applications: Optical discs (CD, CD-R, DVD)

Standard features: Offers turnkey systems for disc production.

Series: IMC

Clamp type: Horizontal, hydromechanical, two-platen (MC Series)

Clamp-size range: 220 to 4400 tons

Injection unit: Hydraulic, two-stage

Injection capacity: 62.4 to 1463 oz

Applications: Direct in-line compounding and molding of long-fiber composites

Standard features: KMG 81 or 97 twin-screw compounding extruder mounted over plunger injection unit; melt accumulator allows extruder to run continuously.

Series: Silcoset

Clamp type: Horizontal, hydromechanical two-platen (C Series)

Clamp-size range: 44 to 220 tons

Injection unit: Hydraulic, reciprocating screw fed by twin piston pumps

Injection capacity: 1.4 to 16.2 cu in.

Applications: Liquid silicone rubber (LSR)

Standard features: Twin hydraulic piston pumps feed two-component silicone; static mixer blends components, pigments; injection barrel is intensively cooled.

LG INTERNATIONAL AMERICA INC.

Series: GoldStar H

Clamp type: Horizontal, fully hydraulic

Clamp-size range: 30 to 1100 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 0.8 to 251.8 oz, rates to 69.9 cu in./sec

Applications: General-purpose

Standard features: DBG barrier screw, bimetallic cylinder, swiveling injection unit, HICOM-300 control with 10.4-in. color LCD controller, memory for 42 mold set-ups, optical encoder for position control.

Series: HS

Clamp type: Horizontal, fully hydraulic,

Clamp-size range: 90 to 250 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 2.9 to 40.9 oz, rates to 24.4 cu in./sec without accumulator, 51.6 cu in./sec with optional accumulator

Applications: High-speed precision molding

Standard features: HICOM-4000 closed-loop control with 10.4-in. color LCD, SPC, optical encoder for position control, variable-volume pump, mold movement during plastication, eject on-the-fly, DBG barrier screw, dual hydraulic core pull, bimetallic barrel.

Options: Accumulator-assisted injection.

Series: HM

Clamp type: Horizontal, hydromechanical

Clamp-size range: 1450 to 3300 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 154.2 to 573.5 oz, rates to 89.7 cu in./sec

Applications: Large parts

Standard features: Reduced machine length, closed-loop injection process control with proportional valve, DBG barrier screw, bimetallic cylinder (except 3300-ton), dual hydraulic core pull, HICOM-4000 control with 10.4-in. color LCD, SPC, self-diagnostics.

Series: M

Clamp type: Horizontal, hydromechanical two-platen

Clamp-size range: 500 to 1150 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 38 to 251 oz, rates to 64.1 cu in./sec

Applications: General purpose

Standard features: Lightweight hollow cast platen minimizes deflection.

Swiveling barrel. HICOM-4000 closed-loop control with 10.4-in. color LCD, SPC; DBG barrier screw, bimetallic barrel.

Series: LGE

Clamp type: Horizontal, toggle

Clamp size: 33-330 tons

Injection unit: All-electric, reciprocating screw

MCP EQUIPMENT

Distr. by: Tomken Tool & Engineering, Inc.

Series: Minimolder

Clamp type: Horizontal or vertical, pneumatic or hydraulic

Clamp size: 9 tons

Injection unit: Pneumatic or hydraulic, two-stage

Injection capacity: 0.25 to 0.78 oz

Applications: Small precision parts (0.02 to 12 g); vertical model for insert or overmolding.

Standard features: Benchtop and floor-standing models, PLC control with graphical display; integral hot-tip for sprueless/ runnerless molding, fast tool and material changes; vertical model has sliding and rotating mold carrier.

MEIKI AMERICA CORP.

Series: MC-SJ

Clamp type: Horizontal, fully hydraulic

Clamp-size range: 55 to 1430 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 2.3 to 361 oz

Applications: General purpose

Standard features: Vistac 1000II control.

Series: MC-DM

Clamp type: Horizontal, fully hydraulic

Clamp-size range: 55 to 1430 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 2.3 to 361 oz

Applications: General purpose

Standard features: Dynameltor high-performance screw.

Options: Vistac 1000II control.

Series: MC-DF

Clamp type: Horizontal, fully hydraulic

Clamp-size range: 55 to 500 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 2.3 to 51.8 oz

Applications: Low-pressure, high-speed molding

Standard features: Vistac 1000II control, accumulator assist for high-speed injection.

Series: MC-TS

Clamp type: Horizontal, fully hydraulic

Clamp-size range: 55 to 500 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 2.3 to 51.8 oz

Applications: Thermosets

Standard features: Vistac 1000II control.

Series: DC

Clamp type: Horizontal, fully hydraulic

Clamp-size range: 715 & 1430 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 780 & 1553 oz

Applications: Low-pressure molding

Standard features: Vistac Super II control.

Options: Gas assist.

Series: MC-BMC

Clamp type: Horizontal, fully hydraulic

Clamp-size range: 110 to 500 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 7.6 to 51.8 oz

Applications: Thermoset BMC

Standard features: Vistac 1000II control.

Options: Gas assist.

Series: MDIP

Clamp type: Hydraulic, hydromechanical

Clamp-size range: 1430 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 175 oz

Applications: Thin-wall parts

Standard features: Vistac Super II controls.

Series: MC-AS

Clamp type: Horizontal, fully hydraulic

Clamp-size range: 55 to 165 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 1.1 to 4.8 oz

Applications: Precision & medical parts Standard features: Vistac 1000IIAS control.

Options: Gas assist.

Series: MB-VR

Clamp type: Vertical, fully hydraulic

Clamp-size range: 770 to 1760 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 7.6 to 96 oz

Applications: Multi-color molding

Standard features: Servo indexer for rotary table, Vistac Super IIVR control.

Series: MC-VR

Clamp type: Vertical, fully hydraulic

Clamp-size range: 38 to 110 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 1 to 9.6 oz

Applications: Insert molding

Standard features: Rotary table.

Series: NADEM

Clamp type: Horizontal, electric/hydraulic hybrid

Clamp-size range: 88 to 550 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 3.9 to 45.1 oz

Applications: General purpose

Standard features: Vistac Alpha control.

Series: MDM

Clamp type: Horizontal, fully hydraulic

Clamp-size range: 44 & 77 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 1.3 oz

Applications: CD, DVD

Standard features: Vistac 1000IID control.

Options: Gas assist.

Series: NS

Clamp type: Horizontal, hydromechanical

Clamp-size range: 1760 to 3300 tons

Injection unit: Hydraulic, reciprocating screw

Applications: Large parts

Standard features: Multi-clamp unit results in fast and efficient mold movement. Touch-panel controller. Longer screws for fast, uniform melting.

MHI INJECTION MOLDING MACHINERY, INC. PLASTIC INJECTION MOLDING MACHINES

Series: MSJ (small sizes)

Clamp type: Horizontal, fully hydraulic

Clamp-size range: 90 to 320 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 2.5 to 40 oz

Applications: General purpose

Standard features: MAC-VII controller, variable-volume pump, eject on-the-fly, three-way part removal, two-stage clamp control, Jet Purge circuit, large tiebar spacing.

Series: MSJ (mid-range)

Clamp type: Horizontal, fully hydraulic

Clamp-size range: 390 to 500 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 40 to 80 oz

Applications: General purpose

Standard features: UB screw with high plasticating and mixing capacity; MAC-VII controller; eject on-the-fly; two-stage clamp control, Jet Purge circuit.

Series: MMJ

Clamp type: Horizontal, hydromechanical "2 1/2-platen"

Clamp-size range: 610 to 1200 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 60 to 340 oz

Applications: General purpose

Standard features: Reduced machine length; UB screw with high plasticating and mixing capacity; MAC-VII controller; eject on-the-fly; two-stage clamp control; automatic mold-thickness readout; Jet Purge circuit; dual core-pull.

Series: ME

Clamp type: Horizontal, electric toggle

Clamp-size range: 390 to 610 tons

Injection unit: Electric, reciprocating screw

Injection capacity: 40 to 80 oz

Applications: General purpose

Standard features: AC servomotors on all primary axes; heavy-duty ball screws; UB screw with high plasticating and mixing capacity; automatic mold-thickness setting; Jet Purge circuit; internal memory for 64 mold set-ups; Peakless Pressure Control circuit. MAC-VIII controller with color LCD touchscreen.

Series: MEt

Clamp type: Horizontal, electric, double toggle

Clamp size: 38 to 330 tons

Injection unit: Electric, reciprocating screw

Standard features: Servomotor-driven belt and ballscrew for major machine functions. PCLS-10 control, small-footprint toggle clamp.

Series: em

Clamp type: Horizontal, hydromechanical/electric hybrid, two-platen

Clamp-size range: 720 to 1200 tons

Injection Unit: Electric, reciprocating screw

Injection capacity: 110 & 160 oz

Applications: General purpose

Standard features: All major movements controlled by AC servomotors and ballscrews while offering space-saving benefits of two-platen clamping mechanism. Built-in servo-pump hydraulic system generates clamp force, operates dual core pulls. UB screw with high plasticating and mixing capacity; automatic mold-thickness setting; two-stage clamp control; Jet Purge circuit; internal memory for 64 mold set-ups; Peakless Pressure Control circuit.

Series: MMIII

Clamp type: Horizontal, hydromechanical two-platen

Clamp-size range: 1450 to 4400 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 160 to 2100 oz

Applications: Large parts

Standard features: UB screw with high plasticating and mixing capacity; MAC-VI controller; eject on-the-fly; two-stage clamp control; automatic mold-thickness readout; Jet Purge circuit; dual core pull.

MINI-JECTOR MACHINERY CORP.

Series: Mini-Jector

Clamp type: Vertical, air compressor or direct hydraulic clamp

Clamp size: Up to 12.5 tons

Injection unit: Vertical plunger or horizontal injection depending on model

Injection capacity: 0.33 to 2.15 oz

Applications: Insert molding

Standard features: Benchtop model requires only air supply and 115 v current for use and has interchangeable heating cylinder sizes and various shot capacities. Larger unit has direct hydraulic screw drive and direct hydraulic clamp and fits in 20 sq ft of space.

MIR USA CORP.

Series: E power

Clamp type: Electric, toggle

Clamp-size range: 200 to 400 tons

Injection unit: Electric, reciprocating screw

Injection capacity: 10.4 to 59.3 oz, rates to 130 mm/sec (200-ton)

Applications: General purpose

Standard features: Four AC servo motors. Direct (beltless) screw drive; no lubricants or grease in clamping unit; electric ejector with no belts or gears; Internet-ready controls with automatic e-mailing of data.

Series: HMPC

Clamp type: Horizontal, hydromechanical two-platen

Clamp-size range: 860 to 9600 tons

Injection unit: Electric, reciprocating screw

Injection capacity: Up to 110 lb per barrel (X2)

Applications: Large parts

Standard features: Largest models have twin clamps and twin barrels.

Series: AtomiC

Clamp type: Electric, toggle

Clamp size: 154-440 tons

MULTIPLAS ENGINEERING

See Gluco Inc.

NEGRI BOSSI INC. NEGRI BOSSI USA

Series: Cambio

Clamp type: Horizontal, hydraulic toggle

Clamp-size range: 44 to 580 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 2.3 to 158 oz

Applications: General purpose

Standard features: Modular design, variable-volume pumps, PC control, CANbus control architecture. Remote teleservice ready. Fully digital.

Series: Vector

Clamp type: Horizontal, hydraulic toggle

Clamp-size range: 660 to 1650 tons

Injection unit: Electric, reciprocating screw

Injection capacity: 63 to 412 oz

Applications: Large parts

Standard features: High-output screw, hydraulic pumps driven by energy-saving variable-speed electric motors. Variable frequency drives. Pivoting injection unit, variable-volume pump, Bosch hydraulics, CANbus control architecture, low machine axis, overlapping movements (plastication, mold open/close, ejection, cores). Remote teleservice ready. Fully digital.

Series: Canbimat

Clamp type: Horizontal, hydraulic toggle

Clamp-size range: 90 to 350 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 2.3 to 36.5 oz

Applications: Two-shot, two-color moldings

Standard features: Vertical and horizontal injection units. Remote teleservice ready. Fully digital.

Series: Canbel VE

Clamp type: Electric, toggle

Clamp-size range: 77 to 935 tons

Injection unit: Horizontal, electric, direct-drive reciprocating

Injection capacity: 2.3 to 125.9 oz

Applications: Precision molding

Standard features: Siemens servo motors for injection (2), clamp (1), and ejector (1). Electric direct drive provides higher clamp speeds and 2.3% energy savings vs. belt-driven ballscrews. Separate lubrication systems for ballscrew and toggle.

Options: Users can combine features of Canbel and Canbio presses to yield hybrid designs.

Series: Bi-Power

Clamp type: Horizontal, hydraulic (two-platen)

Clamp-size range: 1485 to 6600 tons

Injection unit: Electric, reciprocating screw

Injection capacity: 100 to 2300 oz

Applications: Large parts

Standard features: High-output screw, hydraulic pumps driven by energy-saving variable-speed electric motors. Variable frequency drives. Pivoting injection unit, variable-volume pump, Bosch hydraulics, CANbus control architecture, low machine axis, overlapping movements (plastication, mold open/close, ejection, cores). Remote teleservice ready. Fully digital.

NETSTAL MACHINERY INC.

Series: SynErgy

Clamp type: Horizontal, hydraulic toggle

Clamp-size range: 66 to 880 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 54.5 to 85 oz

Applications: Thin-wall, precision parts (for packaging, automotive, electronics).

Standard features: Accumulator-assisted hydraulics, five-point toggle, multi-processor control.

Options: 2C models designed for multi-component molding.

Series: PET-Line

Clamp type: Horizontal, hydraulic toggle

Clamp-size range: 385 to 660 tons

Injection unit: Hydraulic & electric, two-stage

Injection capacity: 118 to 232 oz

Applications: PET preforms, 32 to 144 cavities

Standard features: Electric-driven plastication (two side-by-side extruders), hydraulic plunger injection, top-mounted cooling station, Pentium PC-based control, 15-in. CRT, GraphTrack graphic process visualization.

Series: Disc Jet

Clamp type: Horizontal, fully hydraulic

Clamp size: 66 tons

Injection unit: Horizontal, reciprocating screw

Applications: Optical discs (CD, DVD)

Standard features: Accumulator assist, triangular platen three tiebars and three clamp cylinders on fixed platen, Pentium PC-based control, 15-in. CRT, GraphTrack graphic process visualization.

Series: e-Jet

Clamp type: Horizontal, electric toggle

Clamp size: 55 tons

Injection unit: Electric, reciprocating screw

Injection capacity: 48.3 cc

Applications: Optical discs (CD, DVD)

Standard features: Pentium PC-based control, 15-in. CRT.

Series: Elion

Clamp type: Electric, toggle

Clamp size: 55 to 192.5 tons

Injection unit: Horizontal, electric, reciprocating screw

Injection capacity: 0.7 to 20.4 oz

Applications: General-purpose or precision molding

Standard features: Standard injection speed of 250 mm/sec. Novel compact, cam-like toggle design. Patented closed lubrication system for clamp.

Options: Injection speed of 450 mm/sec.

NIIGATA PLASTIC MACHINERY

Series: Large MD

Clamp type: Horizontal, electric toggle

Clamp-size range: 385 to 2000 tons

Injection unit: Electric, reciprocating screw

Injection capacity: 17 to 360 oz

Applications: General-purpose and precision molding

Standard features: Multiple servomotors and ballscrews drive injection and clamping. Injection speed of 300 mm/sec.

Series: Small MD

Clamp type: Horizontal, electric toggle

Clamp-size range: 35 to 385 tons

Injection unit: Electric, reciprocating screw

Injection capacity: 0.7 to 21 oz

Applications: Precision molding

Standard features: Graphical depiction of injection process, five-point toggle, SPC monitoring, printer port, Expert Function sets up machine automatically based on data on mold, part, and material. Injection speed of 300 mm/sec.

Series: NN

Clamp type: Horizontal, hydraulic toggle

Clamp-size range: 35 to 500 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 0.7 to 66.2 oz

Applications: General purpose

Standard features: Five-point double-toggle clamp, optical encoders for clamp, ejectors, and injection, fuzzy-logic temperature control, SPC monitoring, automatic purge function.

NINGBO HUARE MACHINERY MFG. CO. LTD.

Distr. by: W.Z. International Pro. Inc.

Series: WZHTW

Clamp type: Horizontal, hydraulic toggle

Clamp-size range: 66 to 2204 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 2.2 to 373.9 oz

Applications: General-purpose

Standard features: Multi-stage injection speed and pressure, graphic display of injection, hold and screw recovery, production and process monitoring, Vickers valves and pumps, Omron or Nais limit switches, TE or Fuji contactors, Saim or Intermot hydraulic motors, Gefran or Novo transducers, Mirle controller, 10.4-in. CRT or LCD screen.

Options: Accumulator injection, robot interface, 10-step profile for injection, hold and recovery. T-slot platen, energy-saving hydraulic pump.

Series: WZFT

Clamp type: Vertical, hydraulic

Clamp-size range: 12 to 210 tons

Injection unit: Vertical, hydraulic, reciprocating

Injection capacity: 1.2 to 16.7 oz

Applications: Insert molding

Standard features: Four tiebars, touchscreen panel, double sliding table, hydraulic ejector, automatic nozzle lift for fast mold changes.

Options: FT-DS model with sliding platen for thermosets, FT-R model with rotating platen, FT-P machine for pen making.

NISSEI AMERICA, INC.

Series: AU3E

Clamp type: Horizontal electric, traction type

Clamp size: 3.2 tons

Injection unit: Electric, two-stage

Injection capacity: 0.1 oz (3 cc)

Applications: Tiny parts in short runs

Standard features: AC servomotors for all movements, two-tiebar clamp, built-in chiller/mold temperature controller, cart mounted.

Series: HM7 Denkey

Clamp type: Electric, direct clamp (no toggle)

Clamp size: 7.5 tons

Injection unit: Electric, reciprocating screw

Injection capacity: 0.3 oz

Applications: Tiny parts

Standard features: Servomotors for all motions, built-in chiller and mold-temperature controller, caster-mounted.

Series: Elject NEX

Clamp type: Horizontal, electric toggle

Clamp-size range: 22 to 397 tons

Injection unit: Electric, reciprocating screw

Injection capacity: 0.4 to 31.2 oz

Applications: Precision molding

Standard features: Compact modular design allows for different injection units and lower bed height. New controller has 0.1-ms scan time for rapid response.

Series: UH

Clamp type: Hydraulic

Clamp-size range: Up to 87 tons

Injection unit: Hydraulic, two-stage

Injection capacity: Up to 17 cc, rates up to 2000 mm/sec

Applications: Thin-wall, high-speed filling

Standard features: Closed-loop, digital servovalve control, Triplemelt screw.

Series: DC

Clamp type: Horizontal, fully hydraulic or electric toggle

Clamp-size range: 40 to 400 tons

Injection unit: Two parallel hydraulic reciprocating screws

Applications: Two-color/two-material molding.

Standard features: Twin clamping cylinders, NC9300T control; two ejectors operate independently for cycle-time savings.

Series: TH-E, TH-RE, TD-E, TD-RE

Clamp type: Electric, vertical tractive

Clamp-size range: 20 to 155 tons

Injection unit: Electric, vertical or horizontal reciprocating screw

Injection capacity: 0.4 to 12 oz

Applications: Insert molding

Standard features: Swiveling injection unit; four-tiebar clamp; two-station turntable driven by AC servomotor for "R" models; NC9300T control.

Series: TH

Clamp type: Vertical, fully hydraulic

Clamp-size range: 33 to 165 tons

Injection unit: Hydraulic, vertical reciprocating screw

Injection capacity: 0.4 to 5.3 oz

Applications: Insert molding

Standard features: Clamping cylinder inside machine bed for space savings.

Series: TD

Clamp type: Vertical, fully hydraulic

Clamp-size range: 110 to 220 tons

Injection unit: Hydraulic, vertical or horizontal reciprocating screw

Injection capacity: 5 to 21.6 oz

Applications: Insert molding

Standard features: Stationary or turntable clamping arrangements, clamp cylinder atop machine bed leaves room for automation auxiliaries.

Series: PN

Clamp type: Horizontal, fully hydraulic

Clamp-size range: 22 to 66 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 0.4 to 3.6 oz

Applications: Electronics and other small precision parts

Standard features: Digital setting of mold operating functions, rotary ram in-line injection mechanism, swiveling injection unit, variable-volume pump, NC9300T control with 10.4-in. color LCD, storage for 30 mold set-ups, floppy-disk drive.

Options: Thermoset and rubber versions.

Series: NS

Clamp type: Horizontal, fully hydraulic

Clamp-size range: 11 to 66 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 0.2 to 3.6 oz

Applications: General purpose

Standard features: Competitively priced, 4.5-in. LCD touchscreen (6-in. screen optional), three-way parts removal.

Series: FN

Clamp type: Horizontal, fully hydraulic

Clamp-size range: 89 to 504 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 3.4 to 82.9 oz

Applications: Medium-size runs of automotive, appliance, optical parts, etc.

Standard features: NC9300T controller

Options: Thermoset and rubber versions.

Series: FV

Clamp type: Horizontal, fully hydraulic

Clamp-size range: 618 to 1440 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 71 to 297 oz

Applications: Large parts

Standard features: NC9300T controller, variable-volume pumps.

Series: CD, MO

Clamp type: Horizontal, electric or fully hydraulic

Clamp-size range: 33 & 44 tons

Injection unit: Electric or hydraulic, reciprocating screw

Injection capacity: 27 cc

Applications: CD, DVD

Standard features: Injection-compression capability, digital hydraulic servovalves.

Series: ANI

Clamp type: Horizontal, hydraulic

Clamp-size range: 197 to 946 tons

Injection capacity: 21.4 to 251 oz

Applications: Fast-cycle molding

Standard features: Direct-pressure clamping with special hydraulic circuit for quick response. Fast cycles with overlapping functions. NC9300T controller has 10.4 in. TFT color display, provides six-stage injection speed, three-stage injection pressure, and three-stage holding pressure.

SANDRETTO USA, INC. A TAYLOR'S CO.

Series: Nine

Clamp type: Horizontal, hydraulic toggle

Clamp-size range: 71.5 to 550 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 1.8 to 128.4 oz

Applications: General purpose

Standard features: Modular design, servo-controlled twin variable-volume pumps permits overlapping movements, swiveling injection unit, SEF 2000 control, twin pistons for injection and ejection, quick barrel change.

Series: Mega T

Clamp type: Horizontal, hydraulic toggle

Clamp-size range: 610 to 1200 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 72 to 382 oz

Applications: Large parts

Standard features: Three-stage hydraulic pump allows overlapping of plasticating, clamp, ejector, and core movements. SEF 100 closed-loop multi-processor control, servovalve for injection.

Options: ES injection unit with AC servomotors driving fixed-volume hydraulic pumps--suitable to power the entire machine.

Series: Mega TE

Clamp type: Horizontal, hydraulic toggle

Clamp-size range: 610 to 1200 tons

Injection unit: Hybrid, reciprocating screw (electric screw drive, hydraulic injection)

Injection capacity: 72 to 180 oz

Applications: Thin-wall, high-volume

Standard features: Accumulator-assist on all clamping, injection, ejection; five-point toggle, hydraulic shut-off nozzle, eject on-the-fly.

Series: Mega H, HC

Clamp type: Horizontal, hydromechanical two-platen

Clamp-size range: 1430 to 5500 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 150 to 2215 oz

Applications: Large parts

Standard features: SEF controller, servovalves mounted directly on clamp and injection cylinders, twin rams on injection unit, two small, diagonally opposed cylinders for rapid clamp movement, tiebars retract on clamp opening.

Options: ES injection unit with AC servomotors driving fixed-volume hydraulic pumps suitable to power the entire machine.

Series: Micro

Clamp type: Horizontal, fully hydraulic

Clamp-size range: 34 to 112 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 1.3 to 9.2 oz

Applications: Small parts

Standard features: Variable-volume pump with proportional valves, nitrided screw/ barrel, SPC display with graphical analysis, storage for 100 mold set-ups.

Series: BN Multi-Melt Syncro

Clamp type: Horizontal, hydraulic toggle

Clamp-size range: 125 to 400 tons

Injection unit: Twin hydraulic reciprocating screws

Injection capacity: 9.9 to 52.7 oz

Applications: Multi-component injection, overmolding, coinjection

Standard features: Twin injectors in V arrangement, twin variable-volume servo pumps for injection, eject on-the-fly, PC-based operator interface.

Series: Mach

Clamp type: Hydraulic, toggle

Clamp-size range: 220 to 400 tons

Injection unit: Accumulator-assisted hydraulic, reciprocating screw

Applications: High-speed packaging

Standard features: Electric screw drive, accumulator-assisted clamping.

Series: Nove HP Fast

Clamp type: Horizontal, hydraulic, toggle

Clamp-size range: 75 to 450 tons

Injection unit: Hydraulic, reciprocating screw

Applications: High-speed, thin-wall

Standard features: Accumulator-assisted clamping and injection. Can overlap two movements at full speed.

Options: Electric screw drive, barrier screw for higher plasticating rates.

SODICK

Distr. by: Plustech, Inc.

Series: Eclipse

Clamp type: Horizontal, hybrid electric/ hydromechanical

Clamp-size range: 22 to 198 tons

Injection unit: Electric screw drive, hydraulic injection with accumulator assist.

Injection capacity: 0.16 to 8.8 oz

Applications: High-precision molding (e.g., connectors), engineering resins.

Standard features: Servo-driven ballscrew for clamp open/close, self-contained hydraulic clamping; V-style injection unit.

SUMITOMO PLASTICS-MACHINERY

Series: SE7M

Clamp type: Horizontal, electric double toggle

Clamp-size range: 7.7 tons

Injection unit: Electric, reciprocating screw

Injection capacity: 0.2 oz, rates to 1086 cu in./min

Applications: Micromolding

Standard features: Plasticating, injection, clamping, and ejection driven by beltless, direct-drive AC servo motors. N-Series control with 10.4-in. touch-panel color LCD and full SPC and QC capabilities.

Series: SE-DU

Clamp type: Horizontal, electric double toggle

Clamp-size range: 20 to 198 tons

Injection unit: Electric, reciprocating Screw

Injection capacity: 0.2 to 10.7 oz, rates to 2154 cu in./min

Applications: High-precision parts of all Types

Standard features: Plasticating, injection, clamping, and ejection driven by beltless, direct-drive AC servo motors. Special auto-lube system protects ballscrews and provides cleaner molding environment. N-9 control with 12 in. touchscreen and USB port for download.

Series: SE-HD

Clamp type: Horizontal, electric double toggle

Clamp-size range: 242 to 496 tons

Injection unit: Electric, reciprocating Screw

Injection capacity: 11.2 to 42.4 oz, rates to 2316 cu in./min

Applications: Thick parts and parts with cycle times in excess of 15 sec

Standard features: Equipped for high-duty applications requiring high-hold pressures to 31,718 psi that match injection pressures. Deliver full power for up to 40% of cycle. N-VIII control with 12 in. touchscreen and internal memory for 200 mold setups.

Series: SE-HS

Clamp type: Horizontal, electric double toggle

Clamp-size range: 242 to 385 tons

Injection unit: Electric, reciprocating screw

Injection capacity: 11.2 to 33.4 oz, rates to 4350 cu in./min

Applications: High-speed, high-precision applications with cycle times less than 15 sec

Standard features: Plasticating, injection, clamping, and ejection driven by combination of direct-drive and belted AC servo motors. Special auto-lube system protects ballscrews and provides cleaner molding environment. N-VIII control with 12 in. touchscreen and internal memory for 200 mold setups.

Series: SED-CI

Clamp type: Horizontal, electric double-toggle

Clamp-size range: 83 to 220 tons

Injection unit: Dual units, electric direct-drive, reciprocating screw

Injection capacity: 1.9 to 10.7 oz, rates to 2154 cu in./min

Applications: High-precision double-shot parts with two different resins or colors of resins

Standard features: Plasticating, injection, clamping, and ejection driven by beltless, direct-drive AC servo motors. Special auto-lube system protects ball screws and provides cleaner molding environment. N-VIII control with 12 in. touchscreen and internal memory for 200 mold setups.

Series: SE-HY

Clamp type: Horizontal, electric double-toggle

Clamp-size range: 253 to 495 tons

Injection unit: Electric, accumulator-assisted hydraulic

Injection capacity: 18.8 to 62 oz, rates up to 245.4 cu. in/sec

Applications: Packaging and other ultrahigh-speed, high-productivity applications

Standard features: Plasticating, clamping, and ejection driven by beltless direct-drive AC servo motors (on 495-ton model motor is belted). Two accumulators, digital servo valve and measuring and feedback devices provide fast response, precision injection control. Special auto-lube system protects ballscrews and provides cleaner molding environment. N-VIII control with 12-in. touchscreen and internal memory for 200 mold setups.

Series: SHC

Clamp type: Horizontal, hydromechanical

Clamp-size range: 110 to 385 tons

Injection unit: Hydraulic, reciprocating screw

Applications: General-purpose

Standard features: N-7 control with Fail Safe mold protection. High-resolution Low Speed mode for intrusion molding. Pop-up screens appear when needed and provide reminders to the operator.

Series: SV

Clamp type: Vertical, electric double-toggle

Clamp-size range: 20 to 55 tons

Injection unit: Electric, reciprocating screw

Injection capacity: 0.2 to 1.5 oz, rates to 538 cu in./min

Applications: High-precision vertical including hoop and lens

Standard features: Plasticating, injection, clamping and ejection-driven by beltless, direct-drive AC servo motors. Special auto-lube system protects ballscrews and provides cleaner molding environment. N-VIII control with 12-in. touchscreen and internal memory for 200 mold setups.

Series: SR

Clamp type: Vertical, rotary table, electric double-toggle

Clamp-size range: 55 to 83 tons

Injection unit: Electric, reciprocating screw

Injection capacity: 0.8 to 3 oz, rates to 883 cu in./min

Applications: High-precision vertical including insert and composite applications

Standard features: Plasticating, injection, clamping, ejection and rotary table driven by beltless, direct-drive AC servo motors. Electrically gear-driven table rotates 180[degrees] in less than 1.6 sec and uses mechanical stop mechanism for repeatable positioning. Special auto-lube system protects ballscrews and provides cleaner molding environment. N-VIII control with 12-in. touchscreen and internal memory for 200 mold setups.

TOSHIBA MACHINE CO., AMERICA

Series: EC, ECNII

Clamp type: Electric, 5-point double toggle

Clamp-size range: 5 to 950 tons

Injection unit: Electric, reciprocating screw

Injection capacity: 0.5 to 184 oz, rates to 96 cu in./sec

Applications: Medical and tight tolerance critical parts

Standard features: New V30 12.1 in. active-matrix controller; FIT (filling impulse transfer), laminar-flow, LAP, QDC (quick deceleration circuit); 300 mold memory; USB & CF expansion slots.

Options: Wide platen on 310 to 610 tons; high-speed injection (550 mm/sec); LIM; multi-material molding with rotary platen; parting-line injection; thermoset.

Series: ISGS

Clamp type: Horizontal, fully hydraulic

Clamp-size range: 308 to 610 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 9.2 to 126 oz, rates to 47 cu in./sec

Applications: Small to medium/large parts

Standard features: V21 active-matrix controller; optical encoders for injection and clamp position accuracy to 0.001 mm; hydraulic blocking circuitry to maintain clamp tonnage while saving energy; 3-micron oil filtration; chrome-plated tierods; eject on-the-fly.

Options: High-speed injection using an accumulator or additional pump package; wide platens; two-material machines with rotary platen; parting-line injection; thermoset configurations.

Series: ISG/GN

Clamp type: Horizontal, hydraulic

Clamp-size range: 86 to 243 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 2.9 to 41 oz

Applications: Large parts

Standard features: Wider platens, greater daylight opening, longer clamp and ejector strokes. Servomotor-driven variable-volume hydraulic pump provides faster clamp speeds. Injectvisor V10 control and Moldlyzer part-quality analyzer.

Series: ISGT

Clamp type: Horizontal, hydromechanical two-platen

Clamp-size range: 720 to 1150 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 104 to 250 oz, rates to 77 cu in./sec

Applications: Medium-size parts

Standard features: V21 active-matrix controller; optical encoders for injection and clamp position accuracy to 0.001 mm; binary pump configurations for energy efficiency; 3-micron oil filtration; chrome-plated tierods; eject on-the-fly. Options: High-speed injection using an accumulator or additional pump package; wide platens; extended daylight; 2-material machine; electric screw drive.

Series: ISF-D, ISG-D

Clamp type: Horizontal, hydromechanical two-platen

Injection unit: Hydraulic, reciprocating screw

Clamp-size range: 1450 to 3850 tons

Injection capacity: 142 to 726 oz, rates to 104 cu in./sec

Applications: Large parts

Standard features: V21 active-matrix controller; optical encoders for injection and clamp position accuracy to 0.001 ram; binary pump configurations for energy efficiency; 3-micron oil filtration; chrome-plated tierods; eject on-the-fly. Options: Electric servo injection unit; high-speed injection using an accumulator or additional pump package; wide platens; extended daylight.

TOYO MACHINERY & METAL CO.

Distr. by: Maruka U.S.A. Inc.

Series: Plastar H

Clamp type: Horizontal, hydraulic toggle

Clamp-size range: 35 to 500 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 0.9 to 80 oz

Applications: Precision molding

Standard features: Five-point double toggle clamp, PLCS-9 controller, Windows-based color LCD, memory for 32 mold set-ups, variable-volume pump, feedthroat temperature control, open base.

Series: Plastar Si

Clamp type: Horizontal, electric toggle

Clamp-size range: 35 to 300 tons

Injection unit: Electric, reciprocating screw

Injection capacity: 0.4 to 32.8 oz, rates to 300 mm/sec (up to 110 tons)

Applications: Ultra-precision molding

Standard features: PLCS-9 control, Windows-based color LCD, memory for 32 mold set-ups, five-point double toggle, SCR-II metering system.

Series: TT

Clamp type: Vertical, fully hydraulic

Clamp-size range: 55 to 150 tons

Injection unit: Hydraulic, horizontal reciprocating screw

Injection capacity: 2 to 8.8 oz

Applications: Insert molding

Standard features: Two-station rotary table, PLCS-9 control, Windows-based color LCD, memory for 32 mold set-ups, adjustable nozzle height.

Series: ST

Clamp type: Horizontal, electric toggle

Clamp-size range: 55 & 10 tons

Applications: Optical discs

Standard features: PLCS-9 control, Windows-based color LCD, memory for 32 mold set-ups.

TRUEBLOOD

See HPM.

UBE MACHINERY, INC.

Series: Ubemax UZ

Clamp type: Horizontal, hydraulic toggle

Clamp-size range: 500 to 1500 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 45.57 to 319 oz

Applications: General purpose

Standard features: Humma-X touchscreen controller (Windows PC-based), Allen-Bradley PLC, storage for 99 mold setups, long platen-support shoes to guide oversized molds, bimetallic screw/barrel.

Series: Ultima UN

Clamp type: Horizontal, electric toggle

Clamp-size range: 35 to 1550 tons

Injection unit: Electric, reciprocating screw

Injection capacity: 0.7 to 319 oz

Applications: Thin-wall and precision molding

Standard features: Each axis of motion operates independently via AC servomotor. Constant-Pressure Filling (CPF) control system. Color LCD with touch panel; fuzzy-logic temperature control, platen guide rollers.

Series: Ubemax PZ III

Clamp type: Horizontal, hydraulic toggle

Clamp-size range: 390 to 1000 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 31.9 to 246.6 oz

Applications: General purpose

Standard features: Touch-panel controller, storage for 20 mold set-ups, self-diagnostics.

Options: Wide platens for models of 720 tons and up, tiebar puller, quick mold change.

Series: Ubemax ST

Clamp type: Horizontal, hydraulic toggle

Clamp-size range: 1450 to 7000 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 152.9 to 993.7 oz

Applications: Large parts

Standard features: Automatic clamp-force compensation, automatic color-change sequence.

Options: Quick mold change, automatic hot-runner coupling, automatic mold-utility coupling.

Series: Ubemax UU

Clamp type: Horizontal, hydromechanical two-platen

Clamp-size range: 2200 to 4400 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 265 to 707 oz

Applications: Thin-wall, precision molding; large, thick parts Standard features: Diagonal arrangement of two mold traverse cylinders; HUMMA-S controller with touch panel and EL display, self-diagnostics, storage for 20 mold set-ups, automatic color-change sequence, shuttle-type quick mold change, automatic hot-runner coupling, automatic mold-utilities coupling, standard lot counter stops machine after preset number of cycles.

VAN DORN DEMAG CORP.

See Demag Plastics Group.

VICTOR-TAICHUNG MACHINERY WORKS CO.

Distrib. by: Fortune International Inc.

Series: Ve

Clamp type: Horizontal, hydraulic toggle

Clamp-size range: 121 to 308 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 3.7 to 34 oz

Applications: General purpose

Standard features: Five-point toggle clamp, nitrided screw and barrel, swiveling barrel, V-7000 LCD open-loop controller.

Options: Bimetallic barrel, variable-volume pump, rigid PVC and thermoset injection units.

Series: Vs

Clamp type: Horizontal, hydraulic toggle

Clamp-size range: 55 to 275 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 2 to 29 oz

Applications: General purpose

Standard features: Five-point toggle clamp, nitrided screw and barrel, swiveling barrel, proportional hydraulics, open-loop V-8000 LCD semi-closed loop controller.

Options: Bimetallic screw and barrel, variable-volume pump. Rigid PVC and thermoset injection units.

Series: Vr Medium Tonnage

Clamp type: Horizontal, hydraulic toggle

Clamp-size range: 385, 495 & 605 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 29.8 to 99 oz

Applications: General purpose

Standard features: Five-point toggle clamp, nitrided screw and barrel, swiveling barrel, V-8000 LCD semi-closed loop controller.

Options: Bimetallic screw and barrel, variable-volume pump, rigid PVC and high-wear-resistant injection units.

Series: Vh

Clamp type: Horizontal, fully hydraulic

Clamp-size range: 22 & 44 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 0.39 to 2 oz

Applications: High-precision small parts.

Standard features: V-8000 LCD open-loop controller, variable-volume pump.

Options: Accumulator-assisted injection, fully closed-loop (servovalve) hydraulics.

Series: Vp

Clamp type: Horizontal, hydraulic toggle

Clamp-size range: 880 & 1100 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 71 to 181 oz

Applications: High-volume, high-precision, large parts

Standard features: Five-point toggle clamp, swiveling barrel, V-8000 LCD semi-closed loop controller, Bosch proportional valve, dual injection cylinders.

Options: Robot interface.

Series: V-alpha

Clamp type: Horizontal, electric toggle

Clamp-size range: 55, 88 & 110 tons

Injection unit: Electric, reciprocating screw

Injection capacity: 1.6 to 4.9 oz

Applications: General purpose

Standard features: Five-point toggle clamp, four servomotors and ballscrews, nitrided screw and barrel, VPC 2000 LCD fully closed-loop controller.

Options: Bimetallic screw and barrel, rigid PVC and thermoset injection units.

VISTAR MACHINERY INTERNATIONAL INC.

Series: Hydra Quad (HQ)

Clamp type: Horizontal, fully hydraulic two-platen

Clamp-size range: 33 to 275 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 1.2 to 23.6 oz

Standard features: Barber-Colman MACO 4000 controls, suitable for cleanroom molding.

Options: Electric screw drive.

Series: MP

Clamp type: Horizontal, hydraulic toggle

Clamp-size range: 55 to 935 tons

Injection unit: Hydraulic, reciprocating screw

Injection capacity: 1.7 to 160.3 oz

Applications: General purpose

Standard features: Barber-Colman MACO 4000 controls.
COPYRIGHT 2006 Gardner Publications, Inc.
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2006, Gale Group. All rights reserved. Gale Group is a Thomson Corporation Company.

 
Article Details
Printer friendly Cite/link Email Feedback
Title Annotation:PRODUCT LINES REVIEWED
Publication:Plastics Technology
Date:Oct 1, 2006
Words:11881
Previous Article:Metric conversion chart.
Next Article:Structural foam machines.
Topics:


Related Articles
Blow molds: product lines reviewed.
Practical techniques of injection molding.
Thin-wall molding.
LSR injection molding equipment built specifically for micro sized applications.
Rubber injection molding. (Equipment).
Injection molding.
Spotlight on electric and multi-component machines.
Injection molds.
Injection molding.
Injection molds.

Terms of use | Privacy policy | Copyright © 2018 Farlex, Inc. | Feedback | For webmasters