Printer Friendly

Injection machine.

Combining a rigid clamping system with high-pressure injection capability as standard features, both the 165 and 275 Roboshot Models deliver the performance needed for tight tolerance molding with large molds and small shot sizes. When equipped with an 18 mm screw, the new Roboshot 165 SiB-m can inject as little as 18 g (0.63 oz) at over 2,450 bar pressure (35,550 psi) with a maximum velocity of 330 mm/sec (13 in./sec) and a rate of 84 cc/sec (5.1 cu in./sec). When the Roboshot's motor changes speed and position, everything is precisely controlled because of the mechanical linkage of the rigid ballscrew/motor combination.

Milacron Inc. 513-487-5000

InfoLINK--Enter 050-50801-665 at www.mdtmag.com for immediate information

[ILLUSTRATION OMITTED]

COPYRIGHT 2005 Advantage Business Media
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2005 Gale, Cengage Learning. All rights reserved.

Article Details
Printer friendly Cite/link Email Feedback
Title Annotation:Innovations
Publication:Medical Design Technology
Date:Aug 1, 2005
Words:125
Previous Article:Motion control kit.
Next Article:Marking machine.

Terms of use | Privacy policy | Copyright © 2020 Farlex, Inc. | Feedback | For webmasters