Printer Friendly

Infrared heater.

The ChamberIR Model E4 in-frared heater focuses high-density infrared energy generated by T3-style, halogen lamps onto a cylindrically shaped target area. The Model E4 elliptical chamber is designed for rapid heating of small size continuous materials such as tube, cable and wire with an outer diameter less than 0.25 inches (6 mm). Typical applications for the Model E4 are curing small-diameter silicone tubing, re-glossing small diameter plastic tubing, burning lubricant off extruded wire, curing coatings or adhesives on wire or cable, and drying water from wire or cable. The E4 may also be used as a high temperature furnace in test applications. Fast responding quartz lamps are said to heat up and cool down instantly in response to power control signals. They reach 90% of full operating temperature within three seconds of a cold start.

COPYRIGHT 2006 Lippincott & Peto, Inc.
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2006, Gale Group. All rights reserved. Gale Group is a Thomson Corporation Company.

Article Details
Printer friendly Cite/link Email Feedback
Title Annotation:Equipment
Publication:Rubber World
Date:Sep 22, 2006
Previous Article:Polyether elastomers offer ease of processing.
Next Article:Magnetic clamp systems.

Related Articles
Heaters and heating elements.
Heating & cooling.
Heaters and heating elements.
Infrared heater.
Some like it hot!
Heaters and heating elements.
Heater repair has a new home.
Heaters and heating elements.

Terms of use | Privacy policy | Copyright © 2019 Farlex, Inc. | Feedback | For webmasters