Printer Friendly

IWATT EXPANDS PRIMACCURATE PWM CONTROLLER PLATFORM.

iWatt Inc., a provider of digital-centric power management integrated circuits (ICs), has expanded its PrimAccurate pulse width modulation (PWM) controller platform to include two new power adapter chipsets that offer the company's fastest standby recovery. The iW1766 + iW628 and iW1767 + iW628 chipsets provide ultra-low, <10mW standby power at up to 12W output power and <20mW standby at up to 24W output power (respectively), while giving designers the option for what the company believes is the industry's fastest dynamic load response(1). This combination of features makes these new chipsets greener, higher performance solutions for universal AC/DC adapters and chargers for next-generation

media tablets and smart phones, as well as consumer electronic products and home networking devices that remain permanently plugged in to the wall in standby.

Power supplies that achieve low standby power typically do so by entering a standby operating mode. However, when a load is applied, they need to wake up quickly to keep the output voltage from dropping too low. Dynamic load response (DLR) is determined by the speed at which the system wakes up and responds to changes in the power load.

The iW628 is an adaptive voltage position monitor designed specifically for use with the iW1766 and iW1767 to improve DLR. It sits on the secondary side of an isolated power supply and provides an ultra-fast wake-up signal to the primary-side regulator in the event of a sudden power load change. The iW628 uses iWatt's patented normally OFF technology to eliminate the bias current associated with conventional secondary-side controllers, thereby minimizing standby power consumption.

The trade-off between dynamic load response and standby power is critical in power adapters and chargers, said Zahid Rahim, vice president and general manager of iWatt's AC/DC business unit. We believe iWatt offers the broadest range of PWM controllers to address this trade-off and give designers more options to select the optimal DLR and standby power based on their system requirements.

These new chipsets achieve what the company believes is the ultimate in DLR performance using the additional iW628 voltage position monitor. They join iWatt's recently announced iW1699, iW1760, iW1761 and iW1762 controllers, which offer good DLR performance and low standby power without the need for an additional component.

All controllers in this platform exceed current energy standards in the markets in which the company competes, including the proposed stringent 2012 U.S. DoE regulation requiring under 100mW AC/DC adapter standby power consumption and tighter efficiency requirements. Additionally, all six PWM controllers come in a standard, low-cost, 8-lead SOIC package and offer full protection from fault conditions, including output short-circuit, output over-voltage, output over-current, and over-

temperature protection. The iW628 is packaged in a 3-lead SOT-23.

iW1766, iW1767, iW628 Key Features

iW1766: optimized for up to 12W, <10mW standby power consumption iW1767: optimized for up to 24W, <20mW standby power consumption

Ultra-fast dynamic load response with iW628 adaptive voltage monitor

Efficiency exceeds proposed 2012 DoE regulation for AC/DC adapter standby power consumption and efficiency

User-configurable, five-level cable drop compensation eliminates challenges and cost of stocking multiple product versions for various output voltage needs

Adaptive multi-mode PWM/PFM optimizes efficiency, EMI, and power consumption

Pricing, Packaging, Availability

The iW1766 and iW1767 come in a standard, low-cost, 8-lead SOIC package and are priced at $0.30 each in 1000-piece quantities. The iW628 comes in a 3-lead SOT-23 package and is priced at $0.07 each in 1000-piece quantities. All three parts are available now in production quantities. Product briefs are available at: iW1766 Product Brief; iW1767 Product Brief; iW628 Product Brief.

About iWatt Inc.

Privately-held iWatt Inc. is a provider of digital-centric power management integrated circuits (ICs). iWatt's innovative PrimAccurate technology platform enables high performance, energy-efficient, small-form-factor and cost- effective solutions for markets such as AC/DC power conversion, LED SSL, and LED display backlighting. The company's solutions are designed into the products of leading global original equipment manufacturers (OEMs). The company is backed by VantagePoint Capital Partners and Sigma Partners, two leading CleanTech investors, and Horizon Ventures. The company is headquartered in Campbell, CA with additional offices in Taipei, Taiwan; Seoul, Korea; Tokyo, Japan; Shenzhen, Beijing and Tianjin, China; and Hong Kong.

For more information, visit http://www.iwatt.com or call 408/374-4200.
COPYRIGHT 2013 Worldwide Videotex
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2013 Gale, Cengage Learning. All rights reserved.

 
Article Details
Printer friendly Cite/link Email Feedback
Publication:Electro Manufacturing
Date:May 1, 2013
Words:706
Previous Article:ALTIS INTRODUCES EMBEDDED CBRAM TECHNOLOGY.
Next Article:FROBAS CHOOSES SPYGLASS CDC FOR SOC DESIGN FLOW.
Topics:

Terms of use | Privacy policy | Copyright © 2018 Farlex, Inc. | Feedback | For webmasters