Printer Friendly

Hybrid process cooling system.

EMSCO, Inc. s Hyprcool hybrid process cooling system utilizes an adiabatic wetted cooling tower for water system heat rejection. The hybrid process combines the advantages of dry air cooling towers in the winter months and the advantages of fluid coolers in the summer months to provide highly effective heat rejection for foundry water system requirements. The hybrid process utilizes a fine mist spray into the air prior to contacting the copper cooling tubes which lowers air temperature and increases the heat rejection level of the unit. The control system cycles individual fans as process water and ambient temperatures dictate, and it ultimately activates the water spray mist when warranted. --EMSCO, Inc.

877-77-EMSCO * Fax: 330-833-3029

www.emsco.com

[ILLUSTRATION OMITTED]
COPYRIGHT 2011 American Foundry Society, Inc.
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2011 Gale, Cengage Learning. All rights reserved.

Article Details
Printer friendly Cite/link Email Feedback
Title Annotation:Literature+PLUS+
Publication:Modern Casting
Date:Oct 1, 2011
Words:119
Previous Article:What's your flask IQ? Flask should be regularly inspected to ensure casting quality in horizontal green sand molding. See if you can answer these...
Next Article:Thermal sand reclamation.
Topics:

Terms of use | Privacy policy | Copyright © 2021 Farlex, Inc. | Feedback | For webmasters |