Printer Friendly

How to have the sharpest knife in your drawer: easy process leads to the finest of edges.

[ILLUSTRATION OMITTED]

IT WAS ON A FAMILY OUTING to attend Archeology Days at the Mitchell Prehistoric Indian Village in Mitchell, South Dakota, that I was first introduced to some of the sharpest of man-made blades. I've been fascinated since boyhood by any tool made to cut, so imagine my curiosity as I watched a young fellow practicing the ancient art of flint-knapping, which is a controlled chipping away of bits of stone to sharpen and shape their edges. I also noticed a display of long, slender, shiny glasslike shards, the likes of which I hadn't seen before.

The Mitchell site's director, Dr. Adrian Hannus, explained that these blades were actually flakes of obsidian, a naturally occurring type of glass. He added that, when he had needed some surgery, he talked the surgeon into using replicas of these ancient tools instead of their modern metal counterparts. It was a little startling to me that prehistoric tools could be used in place of modern scalpels, but Hannus said he had been told the cutting edges of the ancient knives were just one molecule thick, making them about 100 times sharper than modern scalpels.

The skill of those who crafted the obsidian blades is indeed impressive. So are the sharpening skills of modern barbers, butchers and others who make a living with blades they maintain. Hence, my method for creating sharp blades is, in my mind, only "pretty good" (See How to Talk Farmer, November/December 2007).

The sharpening methods described here are those I have practiced for decades, and the sharpening devices I use are worn and simple. They were inexpensive when they were new. For knives, I use a synthetic bench stone. It has coarse grit on one side for removing nicks and a finer grit on the other for creating a smoother cutting edge. For many purposes, this is the only stone needed, and the results are good, especially if the knife is used with a "sawing" motion.

When dressing fish, fillet knives are typically pushed along the backbone from head to tail without "sawing" back and forth. When used this way, an even smoother edge works best. I use a medium grit Arkansas bench stone or a paddle stone to work toward the finer edge needed by fillet knives.

[ILLUSTRATIONS OMITTED]

To create a beautifully polished edge, I use a leather strop loaded with polishing compound after the stones, or just for touch-up. The resulting, razorlike edge isn't really necessary except for fillet and wood-carving knives, but I routinely put this sort of edge on my pocket knives because ... well, maybe just because they are such a pleasure to use.

Follow the directions below and you will never be frustrated by a dull knife again.

Nonserrated knives

1. Obtain a bench stone (6 or 8 inches long and 2 inches wide) that's coarse on one side and finer on the other, a medium-grit Arkansas stone (a 6- or 8-inch stone would be better than the small, broken one I use) and a strop and compound if you want finer edges.

Strops are available in woodworking catalogs, or you could make one yourself, as I did, by gluing leather to a piece of wood. Norton makes both synthetic and natural stones and is an old, commonly available brand. The combination and Arkansas stones are meant to be used with cutting oil made for sharpening, but for kitchen knives I just use water and liquid soap smeared on the surface of the stone.

2. Under good light, inspect the cutting edge of the knife you're about to sharpen. If you can see the edge as you rotate the knife, it is dull and will benefit from a good sharpening (remember the obsidian knives with cutting edges that are one molecule thick).

3. Next, secure the combination stone so you have both hands free to hold the knife. A woodworking vise works great, but a more convenient method when in the kitchen is one that I saw Sarah Moulton (a Food Network chef) use as she was demonstrating how to sharpen a chef's knife. She dampened a small cloth and folded it to fit under the sharpening stone. There is enough friction between the cloth, the stone and the countertop to keep the stone in position even when drawing the knife vigorously over the stone. This is simple and much safer than holding the stone with one hand and moving the knife over it with the other.

4. Move the knife across the stone as if trying to slice it. With the stone perpendicular to the edge of the table, and the sharp edge of the knife toward you, put the heel of the knife (the part closest to the handle) in the upper right corner and pull toward yourself and across the stone until the tip of the knife is in the lower right corner. This stroking will create scratches that form mini teeth on the cutting edge, which prove advantageous in cutting some materials.

With long knives or a short stone, you can work the knife over the stone in sections in order to create scratches that are not parallel to the cutting edge.

I work by moving one side of the blade repeatedly over the stone, then making about the same number of strokes on the other side in the opposite direction.

Also, pay attention to the angle of the cutting edge. You create this by changing the distance between the back of the knife and the stone. More distance creates larger angles, which are better for durability and good for cleavers and butcher knives designed for heavy use. Less distance gives a thinner edge, better for fillet knives and knives used for fine slicing and carving wood. To find recommended angles for different types of knives, consult the Norton Web site at NortonStones.com. However, I prefer working by eye and feel. Experiment with different angles on different knives, and try them out by using the knife. You'll soon develop a sense of the angles you like. To decide when you are finished, check to make sure the edge is no longer visible.

[ILLUSTRATION OMITTED]

5. If you want a smoother edge than that obtained by using the finer side of a combination bench stone, move on to a medium, or finer, Arkansas

stone. The method is no different from that used with the coarser stone. Stroke the knife over the stone as if trying to slice with it. Your earlier work with the previous stone has already made the cutting edge invisible, so test the smoother edge obtained with the finer stone by holding the knife as you did to sharpen it and making a slicing cut on a pile of newspaper. If the knife slices easily through the top layers of paper, you're done. If the knife snags and tears the paper or if more than slight pressure is required to slice the paper, return to the stone and make a few more strokes, alternating sides of the cutting edge. If the paper still isn't easily sliced, return first to the fine side of the combination stone and alternate strokes there. Then return again to the Arkansas stone and test again. With practice, all of this becomes second nature, and you will be pleased with how your knife work is improved and made easier because you are using a really sharp knife.

[ILLUSTRATION OMITTED]

6. Polishing the edge to near-razor sharpness is just as easy as the first steps: just pull the knife over the strop, but this time with the sharp edge trailing so it doesn't cut the leather. Alternate sides and direction with each stroke, and test with newspaper as described above.

Serrated knives

Serrated knives have one side that is about the same as other knives, and the cutting edge can be improved by sharpening that side in the manner I have described. If the blade still cuts poorly, the "toothed" side of the blade needs sharpening. This side requires different handling to avoid grinding away the "teeth."

1. Find a round file that fits in the depressions between the teeth by fitting drill bit shanks into the depression. Look for a file that is the closest size to the drill bit that fits best. For most serrated knives, you can find a chainsaw file that will fit--they are available everywhere.

2. Fasten the serrated knife's handle in a wood vise (or a metal vise padded with wood) and stroke the depression between the teeth (use full strokes and count them) at one end of the blade until you can see that the file has cut to the other edge. Do the same number of strokes and maintain the same angle in each of the remaining depressions. If the blade flexes too much as you move from the handle to the tip, reclamp it with the completed part of the blade in the vise.

3. When you are done, there will be a ragged edge on the smooth side of the knife (known as a wire edge.) Remove the wire edge with the fine side of the combination stone. This sharpening method creates a dramatic increase in how aggressively a serrated knife cuts. Be careful, and if others use the knife, warn them that the knife will now cut extremely effectively.

[ILLUSTRATION OMITTED]

Steel made for sharpening

Using a device known as a sharpening steel, it is possible to change the edge of a knife so it will cut some materials more effectively. This can be done after the work with stones described above, or it can be done as a quick way to get more use from a knife that is starting to become dull. Steels are rods that have shallow striations along their length. (Visit www.Grit.com to see before and after photos that show the effect of the steel on the cutting edge of a chef's knife that I sharpened using the fine side of my combination stone.)

[ILLUSTRATION OMITTED]

Hold the steel in one hand and draw the knife from the steel's handle to its tip, while pulling the knife across the steel, first on the upper side of the steel and then on the under side. An alternative is to place the tip of the steel on a surface, such as a cutting board, hold it vertically and, starting next to the knife handle, push one edge of the knife downward along one side of the steel while at the same time pulling the knife toward you. Repeat with the other side of the knife on the other side of the steel. Three or four strokes on each side of the knife are all that is required.

I easily shaved a patch of hair from my arm with my pocketknife after completing all the sharpening steps described above, except the steel. Maybe I should upgrade the title of the article to "A Sharpening Method That's Not All That Bad," but give my methods a try and decide for yourself.

[ILLUSTRATION OMITTED]

QUICK CLIP

WHAT NOT TO DO

I held the stone in my left hand and stroked the knife over the stone with my right. When I was nearly done, I pushed the knife a bit too far and pulled it back under the stone and slashed the back side of my finger. Treating the infection that set in a few days later required IV antibiotics administered in the hospital.

PURCHASING STONES

SHARPENINGSUPPLIES.COM

313 West Beltline Highway

Suite #49

Madison, WI 53713

Phone orders: 800-351-8234

www.sharpeningsupplies.com

CHEAPER THAN DIRT!

P.O. Box 162087

Fort Worth, Texas 76161-2087

www.cheaperthandirt.com

SOUTHERN TACKLE INC.

P.O. Box 956

Delhi, LA 712320956

www.southerntackle.com

888 KNIVES R US

11250 Old St. Augustine Road

#15-271

Jacksonville, FL 32257

888-564-8377

www.888knivesrus.com

KNIFE & SUPPLY CO.

866-390-0869

www.knifesupplycompany.com

An avid gardener and woodworker, Tom Larson combines these passions whenever possible. He keeps his knives and other cutting tools razor sharp at his home in Sioux Falls, South Dakota.
COPYRIGHT 2009 Ogden Publications, Inc.
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2009 Gale, Cengage Learning. All rights reserved.

Article Details
Printer friendly Cite/link Email Feedback
Title Annotation:In The Shop
Author:Larson, Tom
Publication:Grit
Date:Jan 1, 2009
Words:2013
Previous Article:The secret life of snapping turtles: fascinating and ferocious reptile needs our protection.
Next Article:News from the nest.
Topics:

Terms of use | Privacy policy | Copyright © 2021 Farlex, Inc. | Feedback | For webmasters |