Printer Friendly

Hot-runner nozzles heat more evenly.

Melt Design Inc., St. Charles, Ill., has developed a new line of internally heated hot-runner nozzles that are said to deliver better temperature uniformity and part quality. Equatemp nozzles feature a one-piece body and integral heater in which all surfaces of the heater are in direct contact with the nozzle body with no air gaps. The body thereby draws beat immediately away from the element and distributes it evenly across the nozzle. Melt Design says typical external nozzle heaters can produce limited contact between the heater and nozzle body, leading to hot and cold spots and premature heater failure. The units also have replaceable tips and seals. Tel: (630) 443-4000 * PT Direct: 861DB
COPYRIGHT 2004 Gardner Publications, Inc.
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2004, Gale Group. All rights reserved. Gale Group is a Thomson Corporation Company.

Article Details
Printer friendly Cite/link Email Feedback
Title Annotation:Injection Molding
Publication:Plastics Technology
Date:Sep 1, 2004
Words:113
Previous Article:New multi-shot, vertical and high-speed electrics.
Next Article:Larger two-platen unit.


Related Articles
Hot-runner components and systems.
Hot-Runner Components and Systems.
HOT-RUNNER COMPONENTS AND SYSTEMS.
Hot-runner components and systems. (Product Lines Reviewed).
Hot runners: from complete hot halves to individual nozzles, a host of new products promise smaller gate vestiges, less maintenance, better...
Hot-runner components and systems.
Hot-runner components and systems.
21 Hot runners.
Hot-runner components and systems.
Hot-runner components and systems.

Terms of use | Privacy policy | Copyright © 2020 Farlex, Inc. | Feedback | For webmasters