Printer Friendly

Hot-runner controller adds molds ID capability.

A new mold-identification function has been added to the TTC hot-runner temperature controller from Gammaflux L.P., Sterling, Va. Operating profiles for up to 63 injection molds can be stored in a TTC controller. When connected to a mold, the controller automatically selects the appropriate set of operating parameters for that tool.

The Mold ID software is available for TTC controllers that have a PC-based touchscreen interface. The TTC connects with a digital-input mold-reading module via an Ethernet connection. Tel: (703) 471-5050 * PTDirect: 625UK

COPYRIGHT 2006 Gardner Publications, Inc.
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2006, Gale Group. All rights reserved. Gale Group is a Thomson Corporation Company.

Article Details
Printer friendly Cite/link Email Feedback
Title Annotation:KEEPING UP WITH: Injection Molding
Publication:Plastics Technology
Geographic Code:1USA
Date:May 1, 2006
Previous Article:Easier integration of 6-axis robot with press.
Next Article:Top-mounted robot for low ceilings.

Related Articles
Larger New Home for Ewikon Hotrunner.
Hot-Runner Components and Systems.
Configure & Order Hot Runners On-Line.
Hot-runner components and systems. (Product Lines Reviewed).
Hot-runner components and systems.
Hot-runner components and systems.
Hot-runner components and systems.
Injection molding.
Hot-runner components and systems.

Terms of use | Copyright © 2017 Farlex, Inc. | Feedback | For webmasters