Printer Friendly

High-speed clamping system for precise and flexible machining of CNC working centres.

Abstract: This project aimed at developing a high-speed clamping system which is suited to all types of machines which use the same clamping system. It also aims at reducing machine non-productive time. This clamping system is suited to the conditions of the respective company. Fixing on more that one machine is thus made possible without the necessity of moving a part by using a machining axis system. Moreover, additional work pieces can be fixed on special base plates while the machine is in use, which increases the machine's efficiency.

Key words: clamping system, Process chain, CNC

1. INTRODUCTION

Despite the fact that many different types of clamping systems are on the market, most of them are designed for special fields of application, e.g. the production of electrodes which are used for an eroding process. When used with milling machines or eroding machines in order to work on work pieces, these systems can only be partially applied.

But only a perfect symbiosis between the machine, the tools and a universal work piece clamping system can ensure economical use of a high-performance machining centre for the flexible production of parts (see figure 1).

[FIGURE 1 OMITTED]

Today, work pieces are usually fixed on a vice. That's why the parts do not have a clearly defined position, which is necessary at the beginning of the processing step. Therefore, they have to be aligned with the help of a dial gauge. This is a very time-consuming procedure. The vice also has to be brought into an exact position (see figure 2).

[FIGURE 2 OMITTED]

2. THE SPEED CLAMPING SYSTEM

2.1 Structure of the high-speed clamping system

The clamping system consists of the items listed below (see figure 3):

* base plate with co-ordinated hole pattern

* basic block

* clamping plates

* cone screws

* shoulder screws

* load hooks

* vice

The hole pattern is coordinated with the construction units which are manufactured. The base plate is fixed and fastened on the machine table only once. The construction units are centred and strained on a base plate with the help of shoulder screws. Thus the construction unit is brought into a clearly defined position.

The basic block is necessary to achieve a given working height during various procedures, e.g. to position a mill tool at an angle of 90[degrees]. With the help of load hooks which can be screwed into the base plates, an overhead gantry can transport base plates with heavy construction units from one machine to another.

Work pieces which are larger than the clamping plates can be fixed by means of cone screws. The cone screws, which have a fit at the shank, are screwed into the intermediate plate. Large and heavy construction units, which have a mating hole as a complement, can be placed on the base plate by the cone and are subsequently centred automatically. Time-consuming aligning with large work pieces is thus no longer necessary.

[FIGURE 3 OMITTED]

2.2. Use of the clamping system

There are clamping plates of different sizes which are modular (see figure 4). This means that you can simply fix different sizes of work pieces on the plates. They have a hole pattern with hardened sockets. The hole pattern is suited to all construction units of a certain size which can be fixed with it. The hardened sockets guarantee accuracy over a longer period. Should these sockets be damaged by inappropriate treatment, they can be replaced. It is thus possible to mount and reproducibly clamp either differing or identical work pieces. The clamping positions can be stored and retrieved as necessary. This, in turn, permits fast and simple conversion for different work pieces improves the flexibility and ensures high availability of the machining centre. The centre can also be operated in several shifts without major operating costs.

[FIGURE 4 OMITTED]

After a suitable clamping plate has been chosen for the respective work piece and has been taken from the system shelf it is a simple step to centre and strain the part on the clamping plate with the help of shoulder screws (see figure 5).

[FIGURE 5 OMITTED]

The CAD-system first determines the position of the construction unit. The NC system has already defined the point of origin. Aligning with a dial gauge is no longer necessary. The construction units can now be worked on by the machine. The NC programme can also be interrupted and work can be continued where it stopped. This is made possible by the machining axis system which also offers the possibility to finish off a work piece without the necessity to fix it again. The part remains on the clamping plate until the process chain is finished. The clamping plate can be fixed on all machines which use this system (see figure 6).

[FIGURE 6 OMITTED]

Fixing, as described above, is possible while the CNC machine is working. Thus idle times of the machines can be kept to a minimum. This ensures a high efficiency of the machine and increase of the machine running times. Furthermore, it enables the worker to save time (up to 80%) and guarantees greater flexibility by faster changing of the parts as well as higher accuracy and error reduction.

A clamping system which is ideally suited to the requirements of the manufacturing process and which uses an intelligent machine axis system offers many advantages. This system does not just enable us to save time but also benefits the company financially.

3. REFERENCES

Deuring, K. (1953). Spannen im Maschinenbau, Springer Verlag, ISBN: B-0000-BHDL-J, Berlin/ Gottingen/ Heidelberg.

Deutsches Institut fur Normung e.V. (1997). Spannzeuge Tl.1Werkzeugspanner und Vorrichtungen, Beuth Verlag, ISBN: 3-4101-3955-9 Berlin

Kran, H. (1999). Konstruktionselemente fur den Maschinenund Vorrichtungsbau I. Auflage, Vogel Verlag, ISBN: 3-8023-0410-1, Wurzburg

Mauri, H.; Jung, A. & Schimitzek, G. (1986) 1. Einteilung, Aufgaben und Elemente der Vorrichtungen 11. Auflage, Springer Verlag ,ISBN: 3-540-15831-6 Berlin

Perovic, B. (1999). Werkzeugmaschinen und Vorrichtungen, Hanser Verlag, ISBN: 3-446-21031-8, Munchen; Wien

Trummer, A. & Wiebacher, H. (1994) Vorrichtungen der Produktionstechnik, Vieweg Verlag, ISBN: 3-528-04938-3 Braunschweig
COPYRIGHT 2005 DAAAM International Vienna
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2005 Gale, Cengage Learning. All rights reserved.

Article Details
Printer friendly Cite/link Email Feedback
Title Annotation:computer numerical control
Author:Gabor, J.; Gansauge, L.; Badjgholi, F.
Publication:Annals of DAAAM & Proceedings
Article Type:Technical report
Geographic Code:4EUAU
Date:Jan 1, 2005
Words:999
Previous Article:Genetics based machine learning approach to lot release scheduling in a semiconductor manufacturing system.
Next Article:Productivity improvement in cardboard press production industry.
Topics:

Terms of use | Privacy policy | Copyright © 2019 Farlex, Inc. | Feedback | For webmasters