Printer Friendly

High-performance VMC.

The Hardinge-Bridgeport VMC760X[P.sup.3] machining center features machine geometries that are typically two times better than the ISO standards. Heavily-ribbed cast iron construction is used throughout, along with wide-spaced guideways, dual-ball linear guides, and oversized 45-mm ballscrews. A low center of gravity assists with vibration reduction. Critical surfaces and alignments are achieved through hand-scraping techniques. The tool changer is mounted on a separate shoulder to avoid stress on the column. Standard speeds are provided up to 12,000 rpm powered by a 25-hp motor. Hardinge Inc., Booth 1341 or PMTS Booth 800 www.rsleads.com/505tp-215
COPYRIGHT 2005 Nelson Publishing
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2005 Gale, Cengage Learning. All rights reserved.

Article Details
Printer friendly Cite/link Email Feedback
Title Annotation:EASTEC[R]: Advanced Productivity Exposition products
Publication:Tooling & Production
Date:May 1, 2005
Words:98
Previous Article:3D sculpted images.
Next Article:Simulation and optimization.


Related Articles
Eastec show thunders through New England.
`Johnford Challenge' is on at IMTS.
EASTEC[R] 2004: annual expo brings lean, micromachining technology to Northeast.
EASTEC 2005.
Go east--see what's new in metalworking manufacturing.
The American Machine Tool Distributors' Assn. (Rockville, Md.) and the Society of Manufacturing Engineers (Dearborn, Mich.) have agreed to continue...

Terms of use | Privacy policy | Copyright © 2020 Farlex, Inc. | Feedback | For webmasters