Printer Friendly

HYDRO-EXTREME FROM CENTERCHEM.

Centerchem
Tel: 203-822-9800 * Email: cosmetics@centerchem.com
Website: www.centerchem.com

INGREDIENTS                                                       WT%

Phase A
Glyceryl stearate citrate                                          2.50
Vegetable (olus) oil, hydrogenated vegetable oil, Euphorbia        1.00
cerifera (candeilla) wax
Tocopheryl acetate                                                 0.75
Butyrospermum parkii (shea butter)                                 3.00
Macadamia oil (Provital, S.A./Centerchem)                          4.00
Phase B
Water                                                             75.05
Glycerin                                                           3.00
Sodium benzoate                                                    0.25
Potassium sorbate                                                  0.25
Tetrasodium glutamate diacetate, sodium hydroxide, water           0.20
Ceratonia siliqua gum                                              1.00
Acai Eco (Provital, S.A./Centerchem)                               2.50
Phase C
Citric acid, 10%                                                   0.35
Hydromanil HGL MS (Provital, S.A./Centerchem)                      6.00
Fragrance                                                          0.15

PROCEDURE: In vessel, add ingredients of Phase A with mixing at
70-75[degrees]C. Mix until uniform. In a separate/main vessel, add
ingredients of Phase B with mixing at 70-75[degrees]C. Add Phase A into
Phase B with high shear. Mix for 10 minutes. Cool Phase AB to
30[degrees]-35[degrees]C. Add Phase C to the batch with gentle
agitation. Continue mixing until uniform.

Sebum Balancing Facial Oil
Vantage
Website: www.vantagegrp.com

INGREDIENTS                                                        WT%

Phase A
Salacos 816T (Ikeda Corp.) (Cetyl ethylhexanoate)                  52.50
DW Jojoba Colorless (Vantage/Desert Whale) (Simmondsia chinensis   35.00
(jojoba) seed oil)
Distinctive Emul-Lipid BA CC                                        2.00
(Vantage/Resources of Nature) (Polyglyceril-10-oleate (and)
polyglycerul-10 dioleate (and) polyglyceryl-3 oleate (and)
glycerin (and) phospholipids)
Lipovol Crambe w/0.08% Tocoph                                      10.00
(Vantage Specialty Ingredients) (Crambe abyssinica seed oil)
Phase B
Diocide                                                             0.50
(Caprylyl glycol (and) phenoxyethanol (and) hexylene glycol)

PROCEDURE: In the main vessel equipped with a propeller mixer, add
phase 1 ingredients. Mix until uniform. Add phase 2 ingredient. Mix
until uniform.

Kisameet Glacial Clay Facial Peel-off Masque
Coast Southwest, Inc.
Tel: 800-621-0500 * Email: info@coastsouthwest.com
Website: www.coastsouthwest.com

INGREDIENTS                                                        WT%

Phase A
Deionized water                                                    63.70
MPDiol (Coast Southwest, Inc., Lyondellbasell) (Methyl              3.00
Propanediol)
Tetrasodium EDTA (Tetrasodium EDTA)                                 0.10
Glycerin (Coast Southwest, Inc.) (Glycerin)                         3.00
Phase B
Coast PVA-24 (Coast Southwest, Inc.) (Polyvinyl alcohol)            7.00
Phase C
Kisameet Glacial Clay (Coast Southwest, Inc., Kisameet Glacial      7.00
Clay, Inc.) (Clay)
Phase D
Jojoba Oil (Coast Southwest, Jojoba Desert (A.C.S.) Ltd.)           5.00
(Simmondsia Chinensis (Jojoba) (Seed Oil)
Acai Butter (Coast Southwest, Inc., International Cosmetic          3.00
Science Centre (ICSC)) (Euterpe Oleracea Fruit Oil (and)
Butyrospermum Parkii (Shea) Nut Extract (and) Elaeis
Guineensis (Palm) Oil)
Baobab Oil (Coast Southwest, Inc., International Cosmetic           2.00
Science Centre (ICSQ) (Adansonia Digitata Seed Oil)
Avocado Oil (Coast Southwest, Inc.) (Persea Gratissima              3.00
(Avocado) Oil)
Glossamer L6600 (Coast Southwest, Inc.) (Brassica Campestris        0.50
/Aleurites Fordi Oil Copolymer)
Phase E
Astaderm 200 (Coast Southwest, Inc.) (Porphyridium                  2.00
Polysaccharide)
Phase F
Sharomix Amplify AM25 (Coast Southwest, Sharon-Labs)                0.70
(Phenoxyethanol (and) Chlorophenesin (and) Caprylyl Glcol
(and) Didecyldimonium Chloride)

PROCEDURE Phase A-In main vessel, combine Phase A with propeller
mixing. Mix until fully uniform. Phase B - Add Phase B to the main
vessel at 130[degrees]F to 135[degrees]F (50[degrees]F to 55[degrees]C)
and continue to heat to 176[degrees]F to 194[degrees]F (80[degrees]C to
90[degrees]C). Once the desired temperature is reached and all of Phase
B seems to be solubilized, cover the main vessel and hold the
temperature for 10 to 15 minutes. Then discontinue heat and begin to
cool down. Phase C--When the main vessel (Phase AB) has reached
140[degrees]F (60[degrees]C), add Phase C into the formula under
propeller mixing (300 to 400 rpm) until fully uniform and evenly
dispersed. Phase D--Once the main vessel reaches 140[degrees]F
(60[degrees]C), add Phase D to Phase ABC under propeller mixing and
continue to cool to 100[degrees]F to 113[degrees]F (40[degrees]C to
45[degrees]C). Phase E--Phase F--Add Phase E to Phase ABCD at
100[degrees]F to 113[degrees]F (40[degrees]C to 45[degrees]C) followed
by Phase F and continue to cool to room temperature. Transfer the
mixture to final container. PROPERTIES: pH--5.5 to 6.5; Viscosity--N/A.

Derma IQ Skin Relief Toner
CLR
Website: www.clr-berlin.com

INGREDIENTS                                                 WT%

Phase A
Deionized water                                             92.62
Sepimax Zen (Seppic) (Polyacrylate crosspolymer-6)           0.50
Phase B
Butylene glycol (Merck)                                      3.00
Euxyl PE9010 (schulke)(Phenoxyethanol ethylhexylglycerin)    0.80
Annonasense CLR (CLR)                                        3.00
(Proposed INCI: Annona cherimolda fruit extract)
Phase C
Perfume Oil (Tilia WS) (Voegele) (Fragrance)                 0.08

PROCEDURE: Add Sepimax while stirring and stir for ~10 minutes. Add the
ingredients of B in the given order and stir until uniform. Add C as
desired. Directions for use: Swipe it over your face with cotton pad or
gently pat it into your skin with hands.

C-Pep Night Moisture Lip Treatment
Corum
Tel: 886-2-8751-6060
Website: www.corum.com.tw

INGREDIENTS                                                 WT%

Phase A

Mineral oil                                                  8.00
Petroleum                                                   30.00
Corum 5041 (Pentaerythrityl Tetraisosterate)                 5.00
Copernicia Cerifera (Carnauba) Wax                           2.00
Beeswax                                                      2.00
Hydracire S (Acacia Decurrens/Jojoba                         2.00
/Sunflower Seed Wax/Polyglyceryl-3 Esters)
Corum 5014 (C12-14 Alkyl Benzoate)                          10.00
Jojoba oil (Simmondsia Chinensis (jojoba) Seed Oil)          6.00 to 100
Permethyl 104A (Polyisobutene)
Virgin Maracuja Oil (Passiflora Edulis Seed Oil)             3.00
PGLIS 302KC (Polyglyceryl-2 Triisostearate)                  6.00
Phase B
Tocopheryl acetate                                           0.50
C-Pep Defensyl CC (Pentaerythrityl tetraisostearate (and)    2.00
Caprylic/Capric Triglyceride (and) Stearalkonium Hectorite
(and) Propylene Carbonate (and) Palmitoyl Tetrapeptide-7)
C-Pep Elasfyl CC (Pentaerythrityl tetraisostearate           2.00
(and) Caprylic/Capric Triglyceride (and) Stearalkonium
Hectorite (and) Propylene Carbonate (and) Palmitoyl
Hexapeptide-12)
Jeecide CAP-4 (Phenoxyethanol, Caprylyl Glycol)              0.50
Phase C
Mirage Glamour Red                                           0.05
(Calcium Sodium Borosilicate /Titanium Dioxide /Tin Oxide)
Pomme Verte 3491F (Fragrance)                                0.40

PROCEDURE: Weigh Part A and heat up to 80[degrees]C with stirring to
uniform. Cool down A to 60[degrees]C with stirring. Add Part B into A
with stirring and mix well to uniform. Add Part C and mix well after
each addition. PROPERTIES: Viscous liquid with pearl.

Full Metal Shadow
The Hallstar Company
Tel. 877-427-4255 * Email: customerservice@hallstar.com
Website: hallstar.com

INGREDIENTS                                                     WT%

Phase A
Oliwax (Hallstar) (Hydrogenated olive oil, olea europaea         4.50
(olive) fruit oil, olea europaea (olive) oil unsaponifiables
Ozokerite                                                        5.00
Microcrystalline Wax                                             6.00
Olivem 900 (Hallstar) (Sorbitan olivate)                         7.00
Octyldodecanol                                                  16.30
Phase B
Bismuth oxychloride, ethylhexyl hydroxystearate                 10.00
Lift Oleoactif (Hallstar)                                        1.00
(Carthamus tinctorius (safflower) seed oil, astragalus
membranaceus root extract, ubiquinone, tocopherol, spilanthes
acmella flower/leaf/stem extract)
Biochemica Vitamin E Natural (Hallstar) (Tocopherol)             0.20
Phase C
Cyclopentasiloxane                                              20.00
HallBrite BHB (Hallstar) (Butyloctyl salicylate)                 5.00
Cyclopentasiloxane, trimethylsiloxysilicate                     20.00
Synthetic fluorphlogopite, CI77491                               5.00

PROCEDURE: Heat phase A to 85-90[degrees]C. Prepare phase B and add to
phase A. Cool to 75-80[degrees]C. Prepare phase C and mix with a
spatula, wetting the pearl. Add phase C to phase AB and pour
immediately into suitable packaging. PROPERTIES (25[degrees]C):
Appearance--Creamy violet compact.

Butter Cream
CHT GERMANY GMBH
Email: consumer-care@cht.com * Website: www.cht.com

INGREDIENTS                                              WT%

Phase A
BergaCare EM-14 (Berg + Schmidt) (Isopropyl myristate)        3.00
Macadamia oil                                                 1.50
BeauSil Wax 020 (CHT) (Cetyl dimethicone)                     4.00
BeauSil Wax 069 (CHT) (Stearyl dimethicone)                   5.00
BeauSil Wax 055 (CHT)(Cetyl PEG/PPG-10/1 dimethicone)         2.00
BeauSil Gel 8014 (CHT) (Dimethicone and dimethicone          10.00
crosspolymer)
Tocopherol acetate                                            0.25
Fragrance                                                q.s.
Phase B
Water                                                    to 100
Glycerine                                                     6.50
Trisodium citrate                                             0.50
Sodium benzoate                                               0.30

PROCEDURE: Blend ingredients of phase A with high shear. Mix
ingredients of phase B and adjust pH to 5.5 with citric acid. Add phase
B with medium shear to A.

Luxe Cleansing Balm
Active Micro Technologies
Website: www.activemicrotechnologies.com

INGREDIENTS                                                      WT%

Phase A
10350 ABS Rice Lipids Plus (Active Concepts)                     49.25
(Oryza Sativa (Rice) Lipids)
20852 AcquaSeal Algae (Active Concepts)                           5.00
(Chlamydomonas Reinhardtii Extract)
10414 ABS Acai Sterols EFA (Active Concepts) (Euterpe             3.00
Oleracea Sterols, Linoleic Acid, Oleic Acid, Linoleic Acid)
FSS Daikon Extract (FSS)                                         10.00
(Raphanus sativus (radish) seed extract)
Dry-Flo Pure (Akzo Nobel)                                         2.00
(Aluminum Starch Octenylsuccinate)
White Ozokerite Wax (Frank B. Ross) (Ozokerite Wax)               2.00
Emullium Mellifera MB (Gattefosse) (Polyglyceryl-6, Distearate    8.00
Distearate Jojoba Esters, Polyglyceryl-3 Beeswax, Cetyl
Alcohol)
Compritol CG 888 Pellets (Gattefosse) (Glyceryl Behenate)         5.00
Phase B
Polysuga Mulse D9 (Colonial Chemical)                             4.00
(Sorbitan Oleate Decylglucoside Crosspolymer)
11331LNZ ABS Licorice Extract OS (Active Concepts)                5.00
(Glycyrrhiza Glabra (Licorice) Root Extract, Prunus Armeniaca
(Apricot) Kernel Oil, Tocopherol)
20248 AC Repair Oil Complex (Active Concepts)                     3.00
(Helianthus Annuus (Sunflower) Seed Oil, Glycine Soja
(Soybean) Oil, Anthemis Nobilis Flower Oil, Lavandula
Angustifolia (Lavender) Oil, Rosmarinus Officinalis (Rosemary)
Leaf Oil, Calendula Officinalis Flower Extract, Tocopheryl
Acetate, Retinyl Palmitate, Bisabolol)
M16003 Phytocide Elderberry OS (Active Micro Tech.)               3.00
(Sambucus Nigra Fruit Acid)
Phytoscents Coconut (FSS) (Fragrance)                             0.75

PROCEDURE: 1. Combine Phase A, heat to 80-85C. Mix until melted and
uniform. 2. Cool to 45-50C with batch covered for uniform cooling. At
temp, add Phase B. Mix until uniform and pour to jars. PROPERTIES:
Viscosity--n/a; pH n/a; Date Stability Started--1/9/19; Date Micro
Requested -- 1/10/19.

Age Illusion--Face Cream for Fine Lines
Ashland
Tel: 859-815-3333 * Website: www.ashland.com

INGREDIENTS                                                 WT%

Phase A
Purified Water (Water/aqua)                                 q.s. 100
EDTA Tetrasodium Salt (Tetrasodium EDTA)                           0.05
Lubrajel Oil free hydrogel (Ashland) (Glycerin, glyceryl           3.00
acrylate/acrylic acid copolymer, PVN/MA copolymer)
Phase B
UltraThix P-100 polymer (Ashland)                                  0.70
(Acrylic acid/VP crosspolymer)
Optimage SF microgel (Ashland)                                    20.00
(Polyquaternium-28, PVM/MA copolymer)
Phase C
Montanov 202 (Seppic)                                              2.00
(Arachidyl alcohol, behenyl alcohol arachidyl glucoside)
Belsil DM 2 (Wacker) (Dimethicone)                                 4.00
Ceraphyl SLK ester (Ashland) (Isodecyl neopentanoate)              5.00
Phase D
Purified Water (Water/aqua)                                        1.00
Sodium Hydroxide                                                   0.08
Phase E
Conarom B aromatic (Ashland)                                       1.00
(Phenylpropanol, humulus lupulus (hops) extract)
PF Osmanthus Bloom 9115047 (Charabot / Robertet)                   0.15
(Fragrance/parfum, benzyl salicylate, geraniol, linalool,
alpha-isomethyl ionone, citronellol)

PROCEDURE: In the main beaker, add phase A ingredients one by one & mix
well until homogenous while heating to 75[degrees]C. At 60[degrees]C,
add phase B ingred. one by one, homogenize well between each addition
until the gel is smooth. In a side beaker, heat phase C at 75[degrees]C
until all melted. At 75[degrees]C, add phase C in the main vessel &
homogenize. The emulsion should be homogenous. Cool down the batch. At
RT in a side beaker, premix phase D until clear. At 60[degrees]C, add
phase D in the main vessel and mix well until homogenous. At
40[degrees]C, add phase E ingredients one by one and mix well between
each addition. Stop at 25[degrees]C. PROPERTIES: Appear.--white opaque
cream; Viscos.--25,000-40,000 cps (Brookfield RVT, spindle B, 5 rpm, 1
min., 25[degrees]C); pH--5.7-6.2.
COPYRIGHT 2019 Rodman Publishing
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2019 Gale, Cengage Learning. All rights reserved.

Article Details
Printer friendly Cite/link Email Feedback
Title Annotation:Formulary
Publication:Household & Personal Products Industry
Date:Jul 1, 2019
Words:1830
Previous Article:OH, THOSE BOYS OF SUMMER!
Next Article:SKY-HIGH GROWTH FOR CBD BEAUTY AND PERSONAL CARE?
Topics:

Terms of use | Privacy policy | Copyright © 2021 Farlex, Inc. | Feedback | For webmasters