Printer Friendly

Growing PRCI[TM] membership tackles inline inspection, regulatory concerns.

Pipeline Research Council International (PRCI), which has led the drive for more reliable pipeline technologies since 1952, recently selected new research projects to fund for the coming year.

In an energy environment increasingly focused on safety and driven by regulatory concerns, its members chose to concentrate on improving inline inspection (ILI), preventing third-party intrusions along rights-of-way and compiling data that could enable changes from the EPA over compressor pump regulations.

[ILLUSTRATION OMITTED]

"The PRCI membership is made up of the operators of the pipelines, so they are familiar with the challenges they face on a day-by-day basis," said Cliff Johnson, president of PRCI. "The priorities are arrived at through a culmination of factors."

Once PRCI polls its members for a list of their concerns and priorities, the organization works with key trade associations and governmental bodies for additional ideas. This time around, members whittled preliminary proposals of about $22 million down to about $12 million, prior to approval at the board of directors' meeting Sept. 9 in Boston.

"It's sort of a multipronged approach to come up with the agenda for PRCI," Johnson said. "In the United States, you see members mostly focused on maintaining infrastructure vs. China, for example, where the concern is building infrastructure."

PRCI has become an increasingly global organization, having boosted its overall membership by about 25% since Johnson came onboard four years ago. Much of that growth has come from Europe, though the organization has also added sister associations and operating companies to its ranks in recent years.

Johnson said an estimated 50-75% of the projects are driven by regulatory worries, with most of those concerns coming from members in North America and Europe over operational and environmental issues.

"Our members are constantly working to ensure that our research enables them to address regulatory changes and to begin looking ahead to what is needed to develop the safest and most efficient means for delivering this vital resource," he said. "It's difficult for some of the newer research to get adopted once it is completed."

Johnson, who earned a master's degree in public affairs from the University of Texas at Austin, was brought on board by PRCI in 2010 to help handle just such challenges, replacing George Tenley who retired. He had spent the previous 13 years at NACE International, widely considered the top authority on corrosion-control solutions worldwide.

Top Research Projects

Much of the thrust to improve ILI technology dates back to September 2010 and the explosion of the 30-inch San Bruno natural gas pipeline west of San Francisco International Airport in which eight people died.

"We have made significant advances in the area of how we can use inspection tools to provide an understanding of pipe characteristics," Johnson said. "This is going to be a major benefit to the industry because right now there is still a small percentage of infrastructure that the industry does not have full characteristics on."

To gather this data, researchers will go back and verify records pertaining to pipelines in order to provide an extra system of support for operators, and to offer information to address regulatory and public concerns.

Globally, the inline inspection picture has more to do with how to use the massive amount of data already available in concert with information still being compiled in a way that is useful, Johnson explained.

"We've been able to help develop more algorithms that help interpret data better, which is a step forward for the industry," he said.

The program is being developed as a multiyear effort that will depend heavily on the participation of the PRCI member companies in providing past and present data, as well as allowing access to pipelines for technology development, testing and validation.

The research will include ILI tool pull-testing of both improvement and evaluation trials to enhance performance and demonstrate its capabilities. The project will result in standardized testing protocols, and opportunities for technological improvements as well as a better understanding of current technology performance.

PRCI has also made some inroads by looking to other industries for assistance. Through working with the medical industry, for example, researchers now have a handheld device crafted much like a dental x-ray machine that can display pipeline characteristics in near real time.

Johnson said various facets of inline inspection research will be completed at different times between the end of 2017 and early 2020. However, some data verifying current tool capabilities should be available this June.

Rights-Of-Way, Backhoes

While research on preventing third-party intrusions has grown in sophistication, focusing on sensing technology, and ground-based and aerial data from satellites, the pipeline industry still finds the most common threat arising from a rather ordinary source.

"We're still seeing a big challenge from backhoe operators," Johnson said. "It's mind-boggling that this is still an issue, but it is."

The right-of-way (ROW) program is designed to develop a new generation of automated surveillance management systems through the use of various sensor technologies that will provide a "step-change improvement" for preventing pipeline integrity threats. This will involve ground patrols, manned and unmanned aerial vehicles and a satellite program that will eventually be used in large-scale deployment for 450,000-plus miles of pipelines in the United States.

Along the way, however, testing and employing the sensors on manned aircraft should provide significant benefits to the industry in the near term. This is in combination with other satellite and offshore systems, as well as land-based robotics, once the technology becomes cost-effective.

In an effort to further develop data safeguards against construction and other intrusions, PRCI will kick off a program at the site of a Colonial pipeline in Virginia that will use drones to spot potential problems and notify the parties involved. Thus far, the effort has been granted a waiver by the Federal Aviation Administration (FAA). Data is expected to be available in spring.

So far, Johnson said, the use of drones has gathered "some really good data" regarding third-party intrusions and leak detection in rural areas, although drone use is limited in more populated areas because of safety concerns.

As part of the ROW research program, PRCI will test ground-based, midair and satellite observations this month, with "a lot of short-term completion data" available in the summer.

"This area of research is moving rapidly for us and we have a lot of completion dates coming up in the short-term," he said. "We've had fairly aggressive ROW programs for several years now and we're starting to see some results."

Among the possible benefits of the ROW program:

* Increased pipeline integrity and reliability, along with more secure infrastructure through cost-effective ROW monitoring.

* Reduced third-party strikes.

* Decreased loss or delays of public energy supply due to major disruptions.

* Reduced legal expense related to third-party damages.

* Improved public goodwill toward owners and operators who are involved in showing how space and military technology can benefit the public.

Environment, Pump Stations

With regulatory concerns among the biggest drivers in the pipeline industry, the PRCI membership has taken aim at EPA guidelines that, in effect, necessitate pump station shutdowns in order to comply with the inspection process.

"Historically, there have been environmental-based regulations at compressor pump stations established by government and the industry working together, and that has been great," Johnson said. "The EPA decided to make it more stringent. However, they went beyond the current technology."

Johnson said that in the industry's view, the requirements, which went into effect a year ago but have not yet been readily enforced, are unobtainable for a majority of operators and would cause an impediment to production. PRCI's response has been to create a project to monitor two sites for data that it hopes will persuade the EPA to alter its decision.

To its credit, the EPA has reviewed enough complaints about the guidelines over the course of the past year that now it is also looking forward to the PRCI's results. Johnson said the EPA "now believes there are some legitimate concerns."

The model in use, known as the USEPA AERMOD dispersion model, has what PRCI has termed "an inherent N02 over-prediction problem"--a flaw the council said cannot be resolved without further research, field studies and model-performance evaluation.

AERMOD's over-prediction bias is considered by the industry to be too high to be used reliably for new source review (NSR) permitting, system investment planning, attainment designations or adherence to National Ambient Air Quality Standards (NAAQS) compliance analyses.

According to Johnson, during the development, evaluation and approval of AERMOD as the preferred dispersion model, evaluation studies were primarily conducted for electric-generating units. Data necessary to evaluate shorter stacks and NOx impacts from existing compressor engine sources is notably absent.

Additionally, model validation for NOx chemistry from multiple sources has not been conducted due to the lack of sufficient data from ambient monitoring, source emissions and meteorological effects. The PRCI project will begin coordinating the tasks for a multi-year collection of that data.

"As it [current EPA guideline] stands, where mitigation may be warranted, costs will escalate due to over-control in response to model conservatism and inadequacies in model performance," Johnson said.

Model evaluation and performance improvements require "robust ambient monitoring" and an hourly emission dataset to use as the basis to define model bias and over-prediction. Absent an adequately monitored data set, state and regional planning will rely on model over-predicted results to develop compliance strategies.

PRCI plans to ask for a stay in enforcement from the regulation for a year while it does testing, the results of which it will share with the EPA. Three years of testing is expected to follow.

Because pump facilities are one of the highest operating expenses for the transportation of liquids by pipeline, PRCI is also working on expanding certain projects undertaken by its Compressor and Pump Station Technical Committee in a way that allows for a cohesive plan of execution.

The target areas of research will be cutting the cost of maintenance, reducing leaks and emissions while increasing pump efficiency, station reliability and equipment operating range.

"There is a lot going on in the industry," Johnson said. "We want to build on being a safe industry and doing the right thing."

New Tech Center

PRCI broke ground July 7 on a new Technology Development Center (TDC) in Houston, which encompasses a 10-acre campus for research with about half of the area to be taken up by the state-of-the-art pull-test facility.

"This new site will allow us to continue to grow our pipeline sample inventory and to perform the research needed to ensure the safety and integrity of our vital pipeline infrastructure globally," Johnson said.

PRCI established a pipeline repository in 2012 and has built an inventory of over 600 specimens to support technology development through testing at its previous site, also in Houston. PRCI needed the additional space to continue its growth and be more responsive to the needs of the industry. The new center will include 20,000 square feet of workshop and test facilities along with 9,000 square feet of office and meeting space.

PRCI Membership

Since 1952, PRCI has grown from 15 members to its current roll and now spans five continents after beginning as strictly and North American organization.

Pipeline Members

Alliance Pipeline Limited, Canada

ATCO Pipelines, Canada

Boardwalk Pipeline, United States

BP, United States

Buckeye Partners, L.P., United States

Chevron Pipe Line Company, United States

Colonial Pipeline Company, United States

Columbia Pipeline Group, United States

ConocoPhillips, United States

Dominion Transmission, Inc., United States

Enable Midstream Partners, United States

Enbridge Pipelines Inc. and Enbridge Energy Partners LP, Canada

Energy Transfer, United States

Eni S.p.A., Italy

Enterprise Products, United States

ExxonMobil Pipeline Company, United States

Gassco A.S., Norway

GDF Suez, France

Kinder Morgan, United States

Koch Pipeline Company, L.P., United States

Marathon Pipe Line LLC, United States

N.V. Nederlandse Gasunie, Netherlands

National Fuel Gas Supply Corporation, United States

National Grid, United Kingdom

Pacific Gas and Electric Company, United States

Petrobras, Brazil

PetroChina Pipeline Company, China

Phillips 66 Pipeline LLC, United States

Plains All American Pipeline, LP, United States

Sasol Gas Limited, South Africa

Saudi Aramco, Saudi Arabia

Shell Pipeline Company LP, United States

Southern California Gas Company, United States

Spectra Energy Transmission, LLC, United States

Total S.A., France

TransCanada PipeLines Limited, Canada

TransGas Limited, Canada

Williams Companies, Inc., United States

Pipeline Industry Organizations

Association of Oil Pipe Lines, United States

Electric Power Research Institute, United States

Operations Technology Development, United States

Associate Members

Applus RTD, United States

Baoshan Iron & Steel Co., Ltd., China

China Petroleum Pipeline Bureau, China

GE Oil & Gas, United States

RCP Inc., United States

Shell Global Solutions (US) Inc., United States

Sonomatic Limited, United Kingdom

Technical Program Associate Members

Aegion Corporation, United States

Australian Pipeline Industry Association, Ltd., Australia

Baker Hughes, Pipeline Inspection, United States

Berg Steel Pipe Corporation, United States

CNPC Tubular Goods Research Institute, China

Dresser-Rand Corporation, United States

Elster-Instromet N.V., Belgium

Emerson Process Management, United States

Emerson Therm-O-Disc, Inc., United States

Evraz Inc. NA, Canada

Hoerbiger Kompressortechnik Holding Gmbh, Austria

Innospection Ltd, United Kingdom

JFE Steel Corporation, Japan

KROHNE, Inc., Germany

Lincoln Electric Company, United States

NDT Global GmbH & Co. KG, Germany

Nippon Steel & Sumitomo Metal Corporation, Japan

Quest Integrity Group, LLC, United States

Riccardelli Consulting Services, United States

SGS Canada, Canada

ShawCor Ltd., Canada

SICK Process Automation, Germany

Solar Turbines, Inc., United States

Subsea Integrity Group, United Kingdom

T.D. Williamson, Inc., United States

Test Company, United States

The ROSEN Group, United States

Tubos de Acero de Mexico, S.A., Mexico

TWI Ltd., United Kingdom

Welspun Tubular LLC, United States

WorleyParsons Group Inc., United Kingdom

By Michael Reed, Managing Editor
COPYRIGHT 2015 Oildom Publishing Company of Texas, Inc.
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2015 Gale, Cengage Learning. All rights reserved.

 
Article Details
Printer friendly Cite/link Email Feedback
Title Annotation:Pipeline Research Council International
Author:Reed, Michael
Publication:Pipeline & Gas Journal
Article Type:Report
Geographic Code:1CANA
Date:Apr 1, 2015
Words:2267
Previous Article:Good labor hard to find--especially if price slump continues.
Next Article:Road to NGVs hopefully paved with good inventions to match intentions.
Topics:

Terms of use | Privacy policy | Copyright © 2018 Farlex, Inc. | Feedback | For webmasters