Printer Friendly

Global pump.

The Standard TAP series of pumps are centrifugal trash pumps driven by diesel or electric engines. The pumps range in sizes from 4 to 18 inches with flows, of 400 to 12,000 GPM. They are also capable of handling solids up to 4 inches. The TAP series of pumps are automatic priming because they utilize an engine driven compressor that forces air through a venturi system that creates a vacuum on the suction side of the pump end. This suction allows for continuous priming and re-priming at suction lifts up to thirty vertical feet. The pumps have the ability to be used in conditions that cause intermittent flow due to a unique glycol quench system that provides constant lubrication to the mechanical seal. The pump chassis are available in skid or highway legal trailer formats. A sound absorbent acoustic enclosure is also available for pumps used in noise sensitive areas. 866.360.7867, globalpump.com

[ILLUSTRATION OMITTED]
COPYRIGHT 2012 Oildom Publishing Company of Texas, Inc.
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2012 Gale, Cengage Learning. All rights reserved.

Article Details
Printer friendly Cite/link Email Feedback
Title Annotation:BYPASS PUMPING
Publication:Underground Construction
Date:Dec 1, 2012
Words:158
Previous Article:Xylem/Godwin pumps.
Next Article:NYC sinkhole repaired with 120-inch Hobos Pipe.

Terms of use | Privacy policy | Copyright © 2020 Farlex, Inc. | Feedback | For webmasters