Printer Friendly

Germany : Automatic Self-Cleaning Screen Changer Dramatically Increases Output for European Recycler of Post-Consumer Plastics.

The contaminants inevitably found in post-consumer plastics place a heavy burden on the melt filtration equipment in recycling lines and can force operators to spend much time and effort simply changing filter screens. For a European company specializing in polyethylene recycling, the solution was to switch from conventional slide-plate screen changers to an automatically self-cleaning system.

The recycling company has installed such systems in two recycling lines that transform post-consumer polyethylene into pellets used for blown-film production of trash bags. The company replaced two 300-mm slide plate screen changers with 200 mm V-Type screen changers from Nordson Kreyenborg. Because the V-Type systems are automatically self-cleaning, screen changes are necessary only once a day instead of every eight minutes with the old equipment.

The key to eliminating need for frequent screen changes is Nordson Kreyenborg s power backflush technology. When contaminant buildup causes the differential pressure across the screen changer to reach a pre-set level, the backflush sequence begins automatically, with hydraulic pistons compressing some of the already filtered molten polymer and discharging it in reverse direction, back through the screen, to carry away contaminant for removal from the system. The V-Type screen changer purges even heavy contaminant from the melt filter element while maintaining extrusion throughput, minimizing operator intervention, and avoiding downtime.

In Nordson Kreyenborg s V-Type screen changer, melt flow from the extruder splits into four streams for filtration in two pairs of screen cavities, then the streams rejoin with no significant change in melt flow. Each pair of cavities is mounted in a piston which positions both cavities so that they can filter their respective melt streams, or removes one of them from the process to remove contaminant buildup by means of backflushing. In normal operation, polymer is flowing through all four cavities. While one of the cavities is changed, the other three remain in the process.

The process for changing screens is initiated when a pre-defined number of backflushes is reached. This triggers the outward movement of the screen-bearing piston so that the screen pack can be removed and a new filter element is put in its place. Three of the cavities remain in the process while a new screen pack is installed in the fourth.

2014 Al Bawaba ( Provided by SyndiGate Media Inc. ( ).

COPYRIGHT 2014 SyndiGate Media Inc.
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2014 Gale, Cengage Learning. All rights reserved.

Article Details
Printer friendly Cite/link Email Feedback
Publication:Mena Report
Date:Nov 27, 2014
Previous Article:Germany : Nordson Advanced Technology K.K. Japan Moves to Larger, Customer-Focused Facility.
Next Article:Germany : BASF plans major investment in pioneering superabsorbent technology.

Terms of use | Privacy policy | Copyright © 2019 Farlex, Inc. | Feedback | For webmasters