Printer Friendly

Gas-heated walk-in oven.

The No. 884 is a 500[degrees]F gas-heated walk-in oven, currently used to cure rubber parts with steel inserts. Workspace dimensions of this unit measure 52"w x 48"d x 72"h. The workspace is heated by 350,000 btu/hr. installed in a modulating natural gas burner, while a 4,200 cfm, 3 hp recirculating blower provides horizontal airflow across the workload. A top-mounted heat chamber and remote-mounted control panel are included. This walk-in oven features a stainless steel exterior with #4 brushed finish, Type 430 stainless steel interior, 4" thick insulated walls, a 2" thick insulated floor with two pairs of truck wheel guide tracks and motorized dampers on the exhaust for accelerated cooling. The No. 884 has all safety equipment required by IRI, FM and NFPA Standard 86 for gas-heated equipment, including a 975 cfm, 1 hp powered forced exhauster. The oven also includes a digital programming temperature controller. (Grieve)

Circle 101 on card
COPYRIGHT 2005 Lippincott & Peto, Inc.
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2005, Gale Group. All rights reserved. Gale Group is a Thomson Corporation Company.

Article Details
Printer friendly Cite/link Email Feedback
Title Annotation:Suppliers showcase: Equipment
Publication:Rubber World
Date:Nov 1, 2005
Previous Article:Low-heat granulation.
Next Article:Bag dump screener.

Related Articles
Suppliers Showcase EQUIPMENT.
Gas-heated walk-in oven. (Equipment).
Gas-fired walk-in oven. (Equipment).
Gas-fired walk-in oven.
Gas-fired walk-in oven.
Gas-fired walk-in oven.
Walk-in oven.
Gas-heated vertical conveyor curing oven.
Gas-heated walk-in oven.

Terms of use | Privacy policy | Copyright © 2019 Farlex, Inc. | Feedback | For webmasters