Printer Friendly

Fuse blocks.

The HMFA.2 series of terminal blocks uses spring clamp terminations and can accept the standard blade type fuse. It is available in a wide range of voltages and currents up to 125V at 15A. Is also available with LED indication, which can be beneficial in troubleshooting and maintenance situations. The terminal block can be labeled in three different locations and is designed to accept the low-cost PTC push-in jumper.

WHO: Automation Systems Interconnect


COPYRIGHT 2005 UP Media Group, Inc.
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2005, Gale Group. All rights reserved. Gale Group is a Thomson Corporation Company.

Article Details
Printer friendly Cite/link Email Feedback
Publication:Printed Circuit Design & Manufacture
Date:Jun 1, 2005
Previous Article:Get on board: solving thermal problems at board level: the early bird gets the worm. Instead of waiting to address thermal issues at the system...
Next Article:Thermal software.

Related Articles
Twin-sheet forming: how to get in on the action.
Thin-wall molding.
A quick look at rapid prototyping: Nowadays you have a slew of machines to choose from for making physical reality out of virtual solid models....
EPS bead molders turn to automation.
Infinite possibilities in glass art.
Getting a handle on new technology at the 2005 AWFS Vegas Fair.
New software predicts PET bottle shelf life.
Rapid prototyping: rapid, colorful, real, and coming to a desk near you.
RP checks out fast: no one is going to ask you if you'd like paper or plastic, but if you know where to look, you may be able to fill a rapid...
Take off on the fast track to IWF products & services.

Terms of use | Copyright © 2017 Farlex, Inc. | Feedback | For webmasters