Printer Friendly

Full Arch Implant Reconstruction of patient with Combination Syndrome: A clinical Approach.

Husain Ghadhanfari DDS, MS, Abdulaziz AlSanousi, Edward Monaco

Lack of equilibrium between opposite arches in edentulous patient leads sometimes to major problems related to occlusal planes. They can be left untreated or improperly treated. This article re- views one such problem known as Combination Syndrome. The treatment method described involves using a fixed mandibular prosthesis over implants that have been placed immediately after extraction.

Rewarding outcomes depend on thorough evaluation and proper diagnosis of a patient's oral condition. Once the starting point has been determined and the final outcome is designed, the treatment plan merely becomes the method of reaching the desired result.

Kelly first described Combination Syndrome in 1972 as destructive changes in hard and soft tissues of patients with complete maxil- lary denture opposing an unstable bilateral free-end mandibular partial denture.1, 2 In different words, Combination Syndrome is a description of a dental condition that is the result of long term use of a few, usually6 remaining lower anterior teeth, #22-27 and a complete upper denture with no other natural remaining teeth and a lower free end Kennedy class I removable partial denture. The normal biting pressure or forces are directed from the remaining lowfrocks teeth and transmitted through the upper anterior denture, with resulting resorption of bone and slow auto- rotation & tilting of the denture upward and backward, with the upper anterior teeth becoming less visible and the upper posterior teeth becoming more visible as the denture is rotated from func- tion with bone loss of the premaxilla. There may be seven characteristics associated with this syn- drome: 1. Bone loss in the premaxilla. 2. Dropping of the pos- terior maxilla (tuberosities). 3. Extrusion of the lower anterior teeth. 4. Posterior bone loss in the mandible under the RPD. and 5. Papillary hyperplasia of the maxilla. 6. Decreased Oc- clusal Vertical Dimension. and 7. Facial aesthetics often altered dramatically.

If not corrected, the unstable occlusion can result in progressive posterior mandibular atrophy leading to greenstick fractures. The method of reestablishing a proper occlusal relationship is discussed in this article using a conventional maxillary denture and fixed mandibular implant restoration to correct the occlusal issues.


A healthy 54 year-old female patient presented with a complete maxillary conventional denture and class I Kennedy lower partial denture (Fig. 1). The mandibular residual ridge was shaped in the form of a knife edge and the tissue covering the edentulous ridge appeared loose. The buccal shelf areas were inadequate in size to provide the denture with support. The mandible showed extrusion of both the alveolar process and remaining dentition (Fig. 2). The maxilla showed enlarged tuberosity, atrophic pre maxilla, and Papillary hyperplasia on her hard palate (Fig. 3). A limited interarch space was evident at the approximate occlusal vertical dimension (Fig. 4). The patient desired restoration of her teeth within her budgetary limits, with a preference for a non- removable prosthesis of lower arch and more stable maxillary prosthesis, if possible. The treatment plan that was developed included a new upper denture opposing a fixed mandibular prosthesis.

Preoperative Planning

Initial treatment planning began with mounted study casts, pan- oramic radiographic film, cephalometric radiographic film, and intraoral photographs. The mandibular cast was duplicated and a diagnostic wax-up was fabricated to identify ideal implant sites. Two surgical templates were fabricated, one involving occlusal window to indicate approximate implant sites and another outlining the buccal limitations3 (Fig. 5, and 6). The mandibular cast was also used to fabricate an immediate complete lower denture.

Surgical phase

The patient was required to have no food or fluids from midnight before surgery (NPO). The patient was given 0.5 mg sublingual triazolam 1 hour before surgery for sedative purposes. In addi- tion, amoxillin (antibiotic to prevent infections), dexamethasone (corticosteroid used to minimize postoperative swelling) and ibuprofen (nonsteroidal anti-inflammatory drug used to assist in preventing swelling as well as analgesia) were also adminis- tered 1 hour before surgery. The patient's mouth and face were scrubbed with chlorhexidine (0.12%). Bilateral inferior alveolar nerve blocks were given with 2% articaine (1:100,000 epinephrine) and local infiltration with 2% lidocaine (1:50,000 epinephrine) to assist with hemostasis. A midcrestal incision was made from the right distal first molar area to the left distal first molar area with midline vertical releasing incision. A full-thickness buccal flap was reflected and tied back to the vestibule using 2-0 silk suture material. The surgical template was inserted to mark the locations on the alveolar crest. The remaining teeth were extracted, and an alveoplasty was performed on the anterior undercuts of the buccal aspect of the ridge to level the extruded segment (Fig. 7). The template was inserted again to prepare the osteot- omy within the buccal confines of the template. Teeth # 34(21), 33(22), 41(25), 43(27) and 44(28) sites were prepared for a 3.5 mm X 10.0 mm (Nobel Direct Groovy, Nobel Biocare) endosteal root form implant and inserted. Healing caps were placed. An Amalgam tattoo at Site no. 4327 was removed using a round bur. The resulting defect was filled with a demineralized freeze-dried bone allograft (DFDBA) (Puros, Zimmer Dental, CA, USA) and covered with a collagen membrane (BioMend, Zimmer Dental, CA, USA).

Flap margins were trimmed with scissors to allow primary closure with no redundant tissue. Flaps were reapproximated using 3-0 Vicryl (Johnson & Johnson, Somerville, NJ) in an interrupted and continuous manner. The immediate complete lower denture was relined using CoeSoft tissue conditioner (GC America, Alsip, IL). Ice packs were given to the patient and postoperative toons were reviewed. Sutures were removed 2 weeks postsurgically, and the immediate lower denture was once again relined using soft chairside liner (GC America, Alsip, IL).

Prosthetic phase

The patient was instructed not to wear the upper denture for 24 hours before this appointment to permit tissue relaxation.4-6 A final impression of the maxilla using a custom tray and polyvinyl- siloxane was made.

Two months later, the patient received a final impression of the implants using impression pick up technique, a custom tray, and polyvinylsiloxane. The midline, incisal edge position, occlusal plane, buccal lip support, and anterior segment were indicated on the acrylic maxillary base and wax rim. Mandibular record base and wax rim was used with the aid of modified temporary abutment to secure the acrylic base for vertical dimension and bite registration record.

Temporary Abutments were used on the master cast to wax up the mandibular framework (Fig. 8). Completed framework wax up was sent to be scanned and a milled titanium framework to be fabricated. The milled titanium framework (NobelProcera Implant titanium bridge, Nobel Biocare, NJ) tried in the patient mouth for passive fitness (Fig. 9).

Final try-in of the maxillary denture with teeth set in wax was made against mandibular denture teeth try-in set over the tita- nium framework. The occlusal plane (Curve of Spee and Curve

Fig 8

of Wilson) was developed on the mandibular try-in hybrid den- ture using a Circular setup template. This plate is set against the occlusal surfaces of the mandibular teeth and is based on a 3-inch Sphere.

Denture teeth were set in a medial-positioned lingualized occlusion. Misch proposed this occlusal design, which is a modification of the occlusal scheme first developed by Payne and Pound. Only the lingual cusps of the maxillary posterior teeth are in contact with the central fossa during centric occlusion. The mandibular molar cusps are positioned medial to a line drawn from the mesial of the canine to the lingual aspect of the retromolar pad.7 The mandibular prosthesis was created in 1 piece with Procera milled titanium framework. The mandibular implants were placed with- in mental foramen area to accommodate mandibular flexure and limit torsion on the implants.8, 9

After esthetics, occlusion, phonetics, and comfort were evalu- ated both dentures were processed in heat-cured acrylic and delivered at the same appointment (Fig. 10).10 Verification of abutments being seated required periapical films. The implant abutments were then torque to 30 Ncm. Cotton was placed over the abutment screws and sealed with Fermit-N (Vivadent, Schaan, Liechtenstein).

Final panoramic (Fig. 11) was taken to verify baseline crestal bone levels. The patient was recalled two weeks post delivery to evaluate the occlusion, oral hygiene, and soft tissue.


Combination Syndrome is an aggressive occlusal problem that slowly develops over time. Once detected, treatment options are evaluated. Different treatment approaches should be suggested for a patient with Combination Syndrome. The choice of treat- ment ultimately depends on the patient, the amount of time and money she is willing to spend for the treatment, her oral condition and her desire for fixed or removable prosthesis. These options must resolve the problems of function, esthetics, and patient desires, as well as economics. To fulfill these requirements, 2 types of prostheses are available: conventional denture or an implant-retained prosthesis. The use of a conventional denture in restoring the mandibular dentition provides the least patient satisfaction as compared with a fixed prosthesis. For this reason, the patient elected to have the mandibular rehabilitation with an implant-retained prosthesis. The maxillary dentition was restored with a conventional denture because the patient had been wear- ing, had tolerated, and had accepted a complete denture. Also, both esthetics and economics were easily managed with this prosthesis.

Post treatment maintenance recalls appointments are essential to assure denture stability, proper occlusal scheme, and mainte- nance of posterior support and vertical dimension of occlusion. The patient should be recalled on 3 months, 6 months, and 12 months intervals during the first year to observe any changes in posterior support. If acrylic tooth wear and support are lost in the posterior regions, accelerated premaxilla atrophy will develop from excessive forces. Bilateral balanced occlusion is essential for long-term success.

This case study deals with treatment of Combination Syndrome. Understanding the cause can assist the practitioner in preventing further residual ridge deterioration.


The assessment of the risk of developing the combination syndrome depends on past dental history, the condition of the remaining mandibular anterior teeth, and posterior lack of occlusal support. The dentist should study the case carefully in order to assure the irreversibility of this syndrome. Implants provide a predictable method of tooth replacement offering excellent functional and esthetic benefits. Like with any complicated treatment, thorough diagnosis, planning, and implementation of treatment will result in an outstanding outcome for both the patient and dentist.


1. Kelly E. Changes caused by a mandibular removable partial denture opposing a maxillary complete denture. J Prosthet Dent. 1972;27:140-150.

2. Saunders TR, Gillis RE, Desjardins RP. The maxillary complete denture oppos- ing the mandibular bilateral distal extension partial denture. Treatment consider- ations. J Prosthet Dent. 1979;41:124-128.

3. Cabianca M. Surgical template fabrication and utilization involving steel tubes. Int Magazine Oral Implantology. 2001;2: 31-35.

4. Zarb GA, et al. Boucher's Prosthodontic Treatment for Edentulous Patients, 10th ed. St. Louis: Mosby; 1990: 174.

5. Lytle RB. Management of abused oral tissues in complete denture construction. J Prosthet Dent. 1957;7:27-42.

6. Kydd WL, Colin HD. The biological and mechanical effects of stress on oral mucosa. J Prosthet Dent. 1982;47:317-329.

7. Misch CE. Maxillary denture opposing an implant prosthesis. In: Misch CE, ed. Contemporary Implant Dentistry, 2nd ed. St. Louis: Mosby; 1999:639-644.

8. Misch CE. Diagnostic casts, preimplant prosthodontics, treatment prostheses, and surgical templates. In: Misch CE, ed. Contemporary Implant Dentistry, 2nd ed. St. Louis: Mosby; 1999:143-144.

9. Goodkind RJ, Heringlake CB. Mandibular flexure in opening and closure move- ments. J Prosthet Dent. 1973;30: 134-138.

10. Zarb GA, et al. Boucher's Prosthodontic Treatment for Edentulous Patients, 10th ed. St. Louis: Mosby; 1990: 400-405.

Dental News, Volume XVIII, Number IV, 2011

Copyright 2012 -

Provided by an company
COPYRIGHT 2011 SyndiGate Media Inc.
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2011 Gale, Cengage Learning. All rights reserved.

Article Details
Printer friendly Cite/link Email Feedback
Publication:Dental News
Date:Dec 30, 2011
Next Article:Treatment of Angle Class II division II malocclusion with deep overbite.

Terms of use | Privacy policy | Copyright © 2022 Farlex, Inc. | Feedback | For webmasters |