Erratum to "Miniaturized Printed Inverted-F Antenna for Internet of Things: A Design on PCB with a Meandering Line and Shorting Strip".
In the article titled "Miniaturized Printed Inverted-F Antenna for Internet of Things: A Design on PCB with a Meandering Line and Shorting Strip" , there were errors in Figures 3, 4, and 6. In Figure 3, the "W" and "[L.sub.2]" were missing, in Figure 4, the "I" was missing, and in Figure 6, the numbers -30, -25, -20, -15, and -10 were mistakenly written as -35. These errors occurred during the production process. The correct figures are as follows.
Figure 3: (a) Proposed antenna. (b) Antenna with meandering line and meandering shorting strip.
Figure 4: Meandering line used in PIFA.
Figure 6: Simulated and measured S-parameter, [S.sub.11].
 C. Y. Cheung, J. S. M. Yuen, and S. W. Y. Mung, "Miniaturized printed inverted-F antenna for internet of things: a design on PCB with a meandering line and shorting strip," International Journal of Antennas and Propagation, vol. 2018, Article ID 5172960, 5 pages, 2018.
Cheuk Yin Cheung, (1) Joseph S. M. Yuen, (2) and Steve W. Y. Mung (2)
(1) The Hong Kong University of Science and Technology, Hong Kong
(2) Innovation Technology Company Limited, Hong Kong
Correspondence should be addressed to Steve W. Y. Mung; firstname.lastname@example.org
Received 6 June 2018; Accepted 12 June 2018; Published 22 July 2018
|Printer friendly Cite/link Email Feedback|
|Author:||Cheung, Cheuk Yin; Yuen, Joseph S.M.; Mung, Steve W.Y.|
|Publication:||International Journal of Antennas and Propagation|
|Article Type:||Correction notice|
|Date:||Jan 1, 2018|
|Previous Article:||GO Shaping of Omnidirectional Dual-Reflector Antennas with Arbitrary Main-Beam Direction in Elevation Plane by Connecting Conic Sections.|
|Next Article:||A High-Density L-Shaped Backscattering Chipless Tag for RFID Bistatic Systems.|