Printer Friendly

Errata.

In the article "Industrial Paint Application Technology: An Overview" (April 2004 COATINGSTECH, p. 50), under the section on Powder Coatings, it was stated, "According to Harry Lader ... This need, combined with the increased cost effectiveness of powder coatings and improved recycling ability, has resulted in a shift to "spray-to-waste" techniques where the guns and lines are blown out after each color is used to clear them for the next." The statement should read: "According to Harry Lader, Ph.D., ... This need, combined with the increased cost effectiveness of powder coatings and improved booth technology, has resulted in a shift to "spray-to-waste" techniques where the guns and lines are blown out after each color is used to clear them for the next."

JCT COATINGSTECH apologizes for any inconvenience.
COPYRIGHT 2004 Federation of Societies for Coatings Technology
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2004, Gale Group. All rights reserved. Gale Group is a Thomson Corporation Company.

Article Details
Printer friendly Cite/link Email Feedback
Publication:JCT CoatingsTech
Article Type:Correction Notice
Date:Jun 1, 2004
Words:127
Previous Article:In situ monitoring of coating polymerization, cure and aging using frequency dependent dielectric monitoring.
Next Article:2004 CoatingsTech pigment suppliers guide.


Related Articles
Errata.
Erratum: determining the magnetic properties of 1 kg mass standards.
Errata.

Terms of use | Privacy policy | Copyright © 2022 Farlex, Inc. | Feedback | For webmasters |