Printer Friendly

Electrochemical and AFM Characterization of G-Quadruplex Electrochemical Biosensors and Applications.

1. Introduction

In addition to its genetic role, DNA represents one of the most important and smart self-assembling nanomaterials, being largely used in DNA nanotechnology and biosensor technology [1]. A DNA-electrochemical biosensor is a sensing device composed of a DNA layer (the biological recognition element) immobilized on the electrode surface (the electrochemical transducer), to detect target analytes that interact with DNA at nanoscale. The analytes will induce morphological, structural, and electrochemical changes in the DNA layer, which are further translated into an electrochemical signal, Scheme 1 [2-9]. The DNA-electrochemical biosensors are very robust, easy to miniaturise, present excellent detection limits, use small analyte volumes, and have the ability to be used in turbid biofluids, which make them exceptional tools for rapid and simple on-field detection. They also represent good models for simulating nucleic acid interactions with cell membranes, specific DNA sequences, proteins, pharmaceutical drugs, and hazard compounds [2-11].

The DNA is composed of nucleotides, each containing a phosphate group, a sugar group, a nitrogen base, the purines adenine (A) and guanine (G), and the pyrimidines thymine (T) and cytosine (C), Scheme 2(a). The main structural conformation for natural DNA is the double-stranded DNA in Watson-Crick base pairs, Scheme 2(b), the cellular DNA being almost exclusively in this form [12]. However, DNA can be found in a variety of other conformations, such as double-helixes with different types of loops (bulge, internal, hairpin, junction, knotted loops, etc.), single-strands, triplexhelixes, or four-stranded secondary structures (e.g., i-motifs and G-quadruplexes (GQs)) [11-13].

The GQs are four-stranded secondary structures, Scheme 2(c), formed by planar associations of four G bases, named G-quartets, held together by eight Hoogsteen hydrogen bonds, Scheme 2(b). The G-quartets are stacked on top of each other and stabilized by [pi]-[pi] hydrophobic interactions. Monovalent cations, such as [K.sup.+] and [Na.sup.+], are coordinated to the lone pairs of electrons of [O.sup.6] in each G.

The GQ structures are polymorphic, and a variety of topologies have been observed by nuclear magnetic resonance (NMR) or crystallography, either as native structures or complexed with small molecules [14-17].

According to the number of strands, GQs can be classified as monomers (unimolecular, intramolecular, e.g., the human telomeric DNA d[A[G.sub.3] [([T.sub.2]A[G.sub.3]).sub.3]] in the presence of [K.sup.+] ions, Protein Data Bank (PDB) entry 1KF1 [18]), dimers (bimolecular, intermolecular, e.g., the Oxytricha nova telomeric sequence d([G.sub.4][T.sub.4][G.sub.4]) in the presence of [K.sup.+] ions, PDB entry 1JPQ [19]), or tetramers (tetramolecular, intermolecular, e.g., the Tetrahymena telomeric sequence d(T[G.sub.4]T) in the presence of [Na.sup.+] and [Ca.sup.2+] ions, PDB entry 2GW0 [20]), Scheme 2(c).

According to the strand polarity (i.e., the relative arrangement of adjacent strands), the GQs present parallel or antiparallel orientations, according to the glycosidic torsion angle, they present anti or syn orientation, and according to the orientation of the connecting loops, they can be lateral, diagonal, or both [21-24].

The GQ sequences are found in chromosomes' telomeric regions, oncogene promoter sequences, RNA 5'-untranslated regions (5'-UTR), and other relevant genome regions, where they may influence the gene metabolism process and also participate in DNA replication, transcriptional regulation, and genome stability [14, 21-32]. The GQ formation has been associated with a number of diseases, such as cancer, HIV, diabetes, and aging [14, 23]. They are also considered important cancer-specific molecular targets for anticancer drugs, since the GQ stabilization by small organic molecules can lead to telomerase inhibition and telomere dysfunction in cancer cells [22, 33, 34].

Due to GQs biological role, extraordinary stiffness, and the ability to self-organize in more complex two-dimensional networks and long nanowires, they have become relevant in structural biology, medicinal chemistry, supramolecular chemistry, nanotechnology, and biosensor technology [14,22, 23, 25, 35-37].

Short chain G-rich DNA sequences that form GQ structures are now used as recognition elements in GQ electrochemical biosensor devices, since the electrochemical response is particularly sensitive to the DNA sequence structural variations from a single-stranded, double-stranded, or hairpin configuration into a GQ configuration. In addition, short aptamers able to form GQs received a great deal of attention, since they are highly specific in binding to small molecules, proteins, nucleic acids, and even cells and tissues. These GQ aptamers combine the G-quadruplex stiffness and self-assembling versatility with the aptamer high specificity of binding, which allowed the construction of GQ electrochemical biosensors with increased selectivity and sensitivity.

The recent advances on the characterization of the G-rich DNA sequences, at the surface of electrochemical transducers, and the design and applications of GQ electrochemical biosensors for the detection of metal ions, GQ ligands, and other small organic molecules, proteins, and cells will be presented.

2. Electrochemical and AFM Characterization of G-Quadruplexes

Understanding the redox behaviour and adsorption process of the DNA probe at electrochemical transducers is critical for the design and successful application of DNA-electrochemical biosensors [2-7, 9-11, 38-46]. At carbon electrodes, the voltammetric studies showed that DNA bases, Figure 1(a), nucleosides, and nucleotides are all electroactive [47-49].

The double- and single-stranded DNA oxidation in solution shows two anodic peaks, corresponding to the G residues oxidation ([G.sub.r]) and A residues oxidation ([A.sub.r]), Figure 1(b) [2-7, 9-11, 38-46]. The T and C residues oxidation is more difficult to detect, since it occurs with a very low current, at very high positive potentials, near the potential of oxygen evolution.

The electrochemical behaviour of G-rich DNA sequences, able to self-assemble into GQ configurations, Scheme 2(c), was recently studied [54-59].

2.1. Short Chain G-Rich Oligonucleotides. The first report on the electrochemical oxidation of GQs concerned the investigation of two different length thrombin-binding aptamer (TBA) sequences, d([G.sub.2][T.sub.2][G.sub.2]TGT[G.sub.2][T.sub.2][G.sub.2]) and d([G.sub.3][T.sub.2][G.sub.3]TG[T.sub.3][T.sub.2][G.sub.3]) [54]. Both TBA sequences form chair-like unimolecular GQs in [K.sup.+] ion containing solutions, consisting of two G-quartets connected by two TT loops and a single TGT loop. The different adsorption patterns and degree of surface coverage observed by atomic force microscopy (AFM) were correlated with the sequence base composition, presence/absence of [K.sup.+] ions, and voltammetric behaviour observed by differential pulse (DP) voltammetry.

In the absence of [K.sup.+], in [Na.sup.+] containing solutions, the formation of GQs was very slow. The oxidation of both TBA sequences showed only one anodic peak, corresponding to the G residues oxidation in the TBA single-strands [54]. In the presence of [K.sup.+], both TBA sequences folded into GQs. Since no adsorption of the stable and rigid GQs occurred, only a few single-stranded sequences were observed on the highly oriented pyrolytic graphite (HOPG) surface. DP voltammetry showed the decrease of the G residues oxidation peak and the occurrence of a new GQ peak at a higher potential, corresponding to the G residues oxidation in the GQs. The GQ higher oxidation potential was due to the greater difficulty of electron transfer from the inside of the GQ structure to the electrode surface compared to the electron transfer from the G residues in the more flexible single-strands.

The redox behaviour and adsorption of the d[(G).sub.10], d(T[G.sub.9]), and d(T[G.sub.8]T) oligodeoxynucleotide (ODN) sequences were studied by AFM and DP voltammetry at carbon electrodes [50, 56, 57]. All sequences fold into parallel tetramolecular GQ structures, Scheme 2(c)-right. The results demonstrated that GQ formation was directly influenced by the ODN sequence and concentration, pH, and presence of monovalent cations, [Na.sup.+] versus [K.sup.+], Figures 2(c) and 2(d). DP voltammetry allowed the detection of the ODN single-strands folding into GQs and G-based nanostructures, Figure 2(a), in freshly prepared solutions, at concentrations 10 times lower than usually detected using other techniques generally employed to study the GQ formation.

Single-stranded d[(G).sub.10], d(T[G.sub.9]), and d(T[G.sub.8]T) ODNs, in Na+ containing solutions and for short incubation times, were detected using AFM as network films and polymeric structures, Figure 2(b), and using DP voltammetry by the occurrence of only the G residues oxidation peak ([G.sub.r]), Figure 2(c) [13, 50].

GQ structures, in [Na.sup.+] containing solutions and for long incubation times, or in [K.sup.+] containing solutions, were detected using AFM as spherical aggregates, Figure 2(b) (white arrows). DP voltammetry showed the decrease of the G residues oxidation peak and the GQ oxidation peak occurrence, increase, and shift to more positive potentials, in a time-dependent manner, Figure 2(c) [13, 50]. Concerning the self-assembling into higher-order nanostructures, the homo-ODN sequence d[(G).sub.10] was the only sequence forming G-nanowires observed using AFM, Figure 2(b) (black arrows), d(T[G.sub.9]) formed short G-based superstructures that were adsorbed as rod-like shape aggregates, and d(T[G.sub.8]T) formed no nanostructures, due to the presence of T residues at both 5' and 3' ends [50].

The d(T[G.sub.4]T) telomeric repeat sequence of the free-living ciliate protozoa Tetrahymena forms tetramolecular GQs that are considered simpler models of biologically relevant human quadruplexes, being used to obtain high resolution data on pharmaceutical drug-DNA interactions [51]. The well-known conformation of the d(T[G.sub.4]T) GQ and its extraordinary stiffness enabled the d(T[G.sub.4]T) to be considered a good building block candidate for the development of novel devices, with medical and nanotechnology applications. The d(T[G.sub.4]T) self-assembling from single-strand into GQ, influenced by the [Na.sup.+] versus [K.sup.+] ions concentration, was successfully detected using AFM on HOPG, Figure 3(a), and DP voltammetry at glassy carbon (GC) electrode, Figures 3(b) and 3(c) [51]. The d(T[G.sub.4]T) GQs self-assembled very fast in [K.sup.+] and slowly in [Na.sup.+] containing solutions, revealing a time and a [K.sup.+] ions concentration dependent adsorption process and redox behaviour, Figure 3(c).

AFM images of d(T[G.sub.4]T) spontaneously adsorbed from freshly prepared solutions (0 h incubation), in the presence of [Na.sup.+] ions, showed only randomly oriented polymeric structures of 0.89 [+ or -]0.1 nm height, due to the adsorption of single-stranded d(T[G.sub.4]T) molecules, as shown in the high amplification image from Figure 3(a)-up-left.

AFM images after 48 h incubation showed three adsorption morphologies: randomly oriented polymeric structures and network films of 0.81 [+ or -] 0.1 nm height, due the adsorption of d(T[G.sub.4]T) single-strands, spherical aggregates of 2.15 [+ or -] 0.6 nm height, due to the adsorption of short tetramolecular d(T[G.sub.4]T) GQs, and sporadically short nanowires of 0.80 [+ or -] 0.1 nm height and length up to 100 nm. In order to be able to distinguish the presence of the three morphologies, a larger amplification image, Figure 3(a)-up-middle, has been chosen.

AFM images after 7 days' incubation also showed three adsorption morphologies: very rarely, randomly oriented polymeric structures and network films of 0.81 [+ or -] 0.1 nm height, due the adsorption of d(T[G.sub.4]T) single-strands, spherical aggregates of 2.05 [+ or -] 0.5 nm height, due to the adsorption of d(T[G.sub.4]T) GQs, and oriented polymeric domains of 0.81 [+ or -] 0.1 nm height, adsorbed along one of the three axes of symmetry of the HOPG basal planes. Again, in order to distinguish the three adsorption morphologies, a larger amplification image, Figure 3(a)-up-right, has been presented.

AFM images of d(T[G.sub.4]T) immediately after the addition of [K.sup.+] ions (0h incubation) showed two adsorption morphologies: randomly oriented polymeric structures of 0.71 [+ or -] 0.2 nm height, due the adsorption of d(T[G.sub.4]T) single-strands, and spherical aggregates of 1.87 [+ or -] 0.4 nm height, due to the adsorption of d(T[G.sub.4]T) GQs, Figure 3(a)-down-left. Increasing the incubation time to 48 h (larger magnification image from Figure 3(a)-down-middle) and 7 days' incubation (Figure 3(a)-down-right), the number of 1.85 [+ or -] 0.5 nm height aggregates increased, while the 0.80 [+ or -] 0.1 nm height polymeric domains decreased.

The optimum [K.sup.+] ions concentration for the formation of d(T[G.sub.4]T)-GQs was similar to the healthy cells intracellular [K.sup.+] ions concentration. The d(T[G.sub.4]T) higher-order nanostructures self-assembled slowly in [Na.sup.+] ion solutions and were detected by AFM as short nanowires and nanostructured films, Figure 3(a)-up. The absence of higher-order nanostructures in [K.sup.+] ion solutions, Figure 3(a)-down, showed that the rapid formation of stable GQs induced by the [K.sup.+] ions is relevant for the good function of cells.

In another report, the discrimination between double-stranded and GQ DNA was achieved at the gold electrode surface [60], based on the selective interaction between a [[Ru[(N[H.sub.3]).sub.6]].sup.3+] redox label and DNA sequences able to form GQs with different folding type and numbers of G-quartets, d([G.sub.2][T.sub.2][G.sub.2]TGT[G.sub.2][T.sub.2][G.sub.2]), d([T.sub.6][G.sub.2][T.sub.2][G.sub.2]TGT[G.sub.2][T.sub.2][G.sub.2]), d(A[G.sub.3][T.sub.2]A[G.sub.3][T.sub.2]A[G.sub.3][T.sub.2]A[G.sub.3]), d(GTA[G.sub.2]T[G.sub.2][T.sub.2][G.sub.2]TGT[G.sub.2][T.sub.2][G.sub.2]), and d([T.sub.6]CGT[C.sub.2]GT[G.sub.2][T.sub.2][G.sub.3]CA[G.sub.2][T.sub.2][G.sub.4]TGACT). A characteristic voltammetric peak was observed, due to a strong association between the [[Ru[(N[H.sub.3]).sub.6].sub.3+] redox label and the GQs, which was not detected for double-stranded DNA sequences.

2.2. Long Chain G-Rich Polynucleotides. Long chain polynucleotides poly(dG) and poly(G) are widely prevalent in the human and other genomes at both DNA and RNA levels and are used in DNA-electrochemical biosensors, as models to determine the preferential interaction of drugs with G-rich segments of DNA.

AFM at HOPG, Figures 4(a)-4(c), and DP voltammetric studies at GC electrode, Figure 4(d), showed that, in the presence of monovalent [Na.sup.+] or [K.sup.+] ions, the poly(G) single-strands self-assembled into short GQ regions for short incubation times. Large poly(G) GQ aggregates with low adsorption were formed after long incubation times, Figures 4(e)-4(g) [52]. DP voltammograms in freshly prepared poly(G) solutions showed only the G residues oxidation peak ([G.sub.r]), Figure 4(d), due to the G residues oxidation in the poly(G) single-strands.

Increasing the incubation time, the G residues oxidation peak decreased and disappeared, and a GQ oxidation peak in the poly(G) GQ morphology appeared, at a higher oxidation potential, dependent on the incubation time. The GQ oxidation peak current presented a maximum after 10 days' incubation and reached a steady value after ~17 days' incubation, Figure 4(d).

3. G-Quadruplex Electrochemical Biosensor Applications

Several electrochemical strategies are used in DNA-electrochemical biosensors applications:

(i) The direct label-free detection of DNA bases electrochemical current, monitoring the modifications of the [G.sub.r] and [A.sub.r] oxidation peaks

(ii) The detection of redox reactions of reporter label molecules

(iii) The detection of charge transport reactions mediated by the [pi]-[pi] interaction between DNA stacked bases.

However, for the design of GQ electrochemical biosensors, the use of redox molecular labels for electrochemical current amplification has been preferred.

The GQ electrochemical biosensor applications, for the detection of metal ions, GQ ligands and other small organic molecules, proteins, and cells, will be discussed.

3.1. Metal Ions

3.1.1. Folding-Based G-Quadruplex Electrochemical Biosensor. Besides the G-rich DNA sequence requirements, the coordination of monovalent cations is essential for the GQ formation and stability [61]. The physiologically relevant cations for GQ formation are the [K.sup.+] and [Na.sup.+], but, under specific conditions, cations such as [Rb.sup.+], [Cs.sup.+], N[H.sup.4+], [Tl.sup.+], [Sr.sup.2+], [Ba.sup.2+], and [Pb.sup.2+] also influence the GQ formation. Based on the G-rich DNA conformational change from a single-strand to a GQ in the presence of metal ions, Scheme 3, different folding-based GQ electrochemical biosensors have been reported [62, 63].

A GQ electrochemical biosensor for [K.sup.+] ions, based on the d([G.sub.2][T.sub.2][G.sub.2]TGT[G.sub.2][T.sub.2][G.sub.2]) sequence switching from single-strand into a GQ in the presence of [K.sup.+], was developed [64]. The ODN structural modifications were detected via changes on the electron transfer between a ferrocene (Fc) redox label and the gold electrode surface. Similar approaches were used for d([T.sub.4][G.sub.3][T.sub.2]A[G.sub.3][T.sub.2]A[G.sub.3][T.sub.2]A[G.sub.3]) [65], d([T.sub.22]CACATAGTCGACTCA[G.sub.3]) [66], and d([T.sub.3][G.sub.2][T.sub.2][G.sub.2]TGT[G.sub.2][T.sub.2][G.sub.2][T.sub.3]) [67], self-assembled layers in the presence of Fc, either by voltammetry or electrochemical impedance spectroscopy (EIS). Folding-based GQ electrochemical biosensors for monitoring the [Tb.sup.3+] ions at d[[T.sub.20][G.sub.3][([T.sub.2]A[G.sub.3]).sub.3]] [68] and [Pb.sup.2+] at d([T.sup.5][C.sup.2][A.sup.2]C[G.sup.2][T.sup.2][G.sup.2]TGT[G.sup.2][T.sup.2][G.sup.2]) [69] and modified gold electrodes, in the presence of Fc redox labels, were also described.

Small electroactive GQ ligands, able to intercalate into the GQ structure, such as ethyl green [62] and crystal violet [63], were also successfully employed as redox labels. Ethyl green GQ intercalator was applied for the development of a GQ electrochemical biosensor for the determination of [Pb.sup.2+] ions [62], at the surfaces of carbon paste and multiwalled carbon nanotube paste electrodes. The electrochemical determination of [Pb.sup.2+] was achieved by following the structural modification of the d[([G.sub.3]T).sub.4] sequence from a single-strand into a GQ in the presence of [Pb.sup.2+], followed by the ethyl green intercalation into the GQ, which caused changes in the ethyl green reduction peak current. In another example, a GQ electrochemical biosensor for [Pb.sup.2+] detection was based on the electrochemical current of the crystal violet GQ ligand, with the d[([G.sub.3]T).sub.4] sequence immobilized at a gold electrode surface [63].

3.1.2. Hemin/GQ DNAzyme Electrochemical Biosensor. Hemin/GQ DNAzyme electrochemical biosensors represent one of the most popular building assays of GQ electrochemical biosensors [70]. In peroxidase hemin/GQ DNAzyme, the complex formed by hemin, an iron-containing porphyrin, with GQ DNA sequences, leads to an improved peroxidase activity of hemin and facilitates a redox reaction between a target molecule (the substrate, e.g., 3,3',5,5'-tetramethylbenzidine, hydroquinone, or ferrocene methyl alcohol) and [H.sub.2][O.sub.2]. The target molecule oxidation product is electrochemically detected, Scheme 4.

A hemin/GQ DNAzyme electrochemical biosensor for the detection of [Hg.sup.2+] was developed [71], based on a bifunctional ODN sequence that contained a Hg-specific domain and a GQ domain, immobilized on gold electrode surface. The interaction between the GQ domain and hemin generated a hemin/GQ complex, which catalyzed the electrochemical reduction of [H.sub.2][O.sub.2], producing amplified readout currents for [Hg.sup.2+] interaction events.

In a more complex design, the hemin/GQ DNAzyme was used to develop a surface plasmon resonance and electrochemical biosensor for [Pb.sup.2+] ions [72]. A complex consisting of the [Pb.sup.2+]-dependent DNAzyme sequence and a ribonuclease-containing nucleic acid sequence (corresponding to the substrate of the DNAzyme) linked to a G-rich ODN sequence was assembled on gold electrode surfaces. In the presence of [Pb.sup.2+] ions, the [Pb.sup.2+]-dependent DNAzyme cleaved the substrate, leading to the separation of the complex and to the self-assembly of the hemin/GQ complex. The electrochemical detection of [Pb.sup.2+] showed a detection limit of 1 pM and a good selectivity.

In a different approach, taking advantage of the hemin/GQ ability to act both as a NADH oxidase, assisting the oxidation of NADH to NA[D.sup.+] together with the generation of [H.sub.2][O.sub.2] in the presence of dissolved [O.sub.2], and a peroxidase DNAzyme to bioelectrocatalyse the reduction of the produced [H.sub.2][O.sub.2], a hemin/GQ DNAzyme electrochemical biosensor for [Hg.sup.2+] detection was developed [73]. The sensor showed improved detection limit and excellent selectivity against other interfering metal ions.

3.2. G-Quadruplex Ligands and Other Small Organic Compounds

3.2.1. Folding-Based G-Quadruplex Electrochemical Biosensor. The GQ ligands are small molecules that bind to G-rich DNA sequences, which are considered novel therapeutic targets for anticancer drug development. They have the ability to induce and stabilize the DNA folding into GQ configurations at the level of telomeres, preventing the telomeric DNA from unwinding and opening to telomerase and thus indirectly targeting the telomerase and inhibiting its catalytic activity, which further leads to the senescence and apoptosis of tumour cells.

Recently, remarkable progress has been made in the development of selective GQ ligands that entered in clinical trials for cancer therapy, presenting significant telomerase inhibition or suppression of the transcription activity of oncogenes. Examples may include the trisubstituted acridine compound BRACO-19 and, more recently, a series of new triazole-linked acridine ligands, for example, GL15 and GL7, with enhanced selectivity for human telomeric GQ binding versus duplex DNA binding.

BRACO-19, GL15, and GL7 present complex, pHdependent, and adsorption-controlled irreversible oxidation mechanisms, at GC electrode [74, 75]. The interaction between DNA and the acridine ligands GL15 and GL7 was investigated in incubated solutions and using DNA-, poly(G)-, and poly(A)-electrochemical biosensors [75]. Both GL15 and GL7 interacted with DNA in a time-dependent manner, with preferential affinity for the G-rich segments, but did not cause DNA oxidative damage.

The interactions of the GQ-targeting triazole-linked acridine ligand GL15 with the short chain length Tetrahymena telomeric DNA repeat sequence d(T[G.sub.4]T) and with the long poly(G) sequence have been studied [53]. The results showed that GL15 interacts with both sequences in a time-dependent manner. In the presence of GL15, GQ formation was detected by AFM via the adsorption of GL15-d(T[G.sub.4]T) GQ and GL15-poly(G) GQ small spherical aggregates and large GL15-poly(G) GQ assemblies and by DP voltammetry via GL15 and [G.sub.r] oxidation peak current decrease and disappearance and the occurrence of a GQ oxidation peak, Figure 5.

The GL15 interaction with d(T[G.sub.4] T) and poly(G) was directly influenced by the presence in solution of monovalent [Na.sup.+] ions, Figure 5(a), or [K.sup.+] ions, Figure 5(b). These results were consistent with the interaction of triazole-linked acridine derivatives with terminal G-quartets in individual GQs, Figure 5-right. The binding, in [Na.sup.+] or [K.sup.+] ions solutions, of GL15 to d(T[G.sub.4]T) and poly(G) strongly stabilized the GQs and accelerated GQ formation, although only the [K.sup.+] ions containing solution promoted the formation of perfectly aligned tetramolecular GQs [53].

An electrochemical biosensor for the investigation of GQ ligands telomerase inhibitors prepared by modification of a GC electrode with gold nanoparticles and GQ d([([G.sub.3][T.sub.2]A).sub.4][G.sub.3]) and i-motif d([([C.sub.3]T[A.sub.2]).sub.4][C.sub.3]) DNA sequences was developed [76]. EIS results showed the increase of the charge transfer resistance with increasing the GQ ligand concentration, due to the GQ ligand interaction. 1,4-Dihydropyridine derivatives showed good GQ affinity in the concentration range from 5.0 to 700 [micro]M, and the ligands selectivity was studied using different control double-stranded DNA sequences.

A GQ electrochemical biosensor for the detection of GQ ligands ethidium bromide and polyamines spermine or spermidine was developed [77], which was based on the immobilization of the 30-mer d([G.sub.3][(A[G.sub.3]).sub.2][A.sub.2][G.sub.2][(A[G.sub.3]).sub.3]AGC) sequence on a pretreated multiwalled carbon nanotubes modified GC electrode. The characteristics of the modified electrode and the GQ interaction with ethidium bromide and polyamines spermine or spermidine were investigated, via the [[Ru[(N[H.sub.3]).sub.6]].sup.3+] peak current decrease with increasing ligands concentration.

Apart for GQ ligands, GQ electrochemical biosensors for the detection of other small organic molecules were developed, using aptamers with specific recognition for the target analyte. Several GQ aptamers for small organic molecules have been described in the literature, for example, hematoporphyrin IX, hemin, ochratoxin, and ATP [78], and some were already used for the development of GQ electrochemical biosensors.

Ochratoxin A (OTA) is a secondary metabolite of fungi strands like Aspergillus ochraceus, Aspergillus carbonarius, and Penicillium verrucosum that can contaminate a large number of food supplies. An impedimetric GQ electrochemical biosensor for the detection of OTA was developed, based on the OTA specific aptamer sequence d(GATC[G.sub.3]TGT[G.sub.3]T[G.sub.2]CGT[A.sub.3][G.sub.3]AGCATC[G.sub.2]ACA) [79]. The aptamer was covalently immobilized onto a mixed Langmuir-Blodgett monolayer composed of polyaniline-stearic acid and deposited on indium tin oxide coated glass plates. The sensor showed a 0.24 nM detection limit for OTA [79]. This methodology was improved, a detection limit of 0.12 nM for OTA was achieved, and the biosensor has been also successfully applied for OTA determination in food samples [80].

Another design for the OTA detection proposed the use of a long polyethylene glycol spacer chain, which led to the formation of long tunnels at the surface of screen printed carbon electrodes, with the OTA aptamers acting as gates. The OTA specific binding to the aptamer led to changes in the aptamer configuration and, consequently, to a peak current decrease [81].

In a different approach, OTA was detected at a GQ electrochemical biosensor that used a hairpin OTA aptamer and site-specific DNA cleavage of the TaqaI restriction endonuclease and a streptavidin-horseradish peroxidase label [82].

3.2.2. Hemin/GQ DNAzyme Electrochemical Biosensor. A hemin/GQ DNAzyme electrochemical biosensor for the detection of the GQ ligands 5,10,15,20-tetra-(N-methyl-4-pyridyl) porphyrin (TMPyP4) and N,N-bis[2-(1-piperidino)ethyl]-3,4,9,10-perylenetetracarboxylic diimide (PIPER) [83] was described. The biosensor was prepared using the human telomeric DNA sequence d(AG3 [([T.sub.2]A[G.sub.3]).sub.3]) immobilized at the pyrolytic graphite electrode surface. Both the hemin and the GQ ligand bound simultaneously to the GQ structure, and neither PIPER nor TMPyP4 destroyed the hemin/GQ complex. Voltammetric and spectrometric methods were simultaneously employed to verify the interactions and binding stoichiometry between the GQ ligands and the hemin/GQ complex. The binding stoichiometry was determined to be 2:1 for TMPyP4-hemin/GQ and 4:1 for PIPER-hemin/GQ.

A common strategy for hemin/GQ DNAzyme electrochemical biosensors for the detection of small organic compounds that do not directly bind to the GQ consisted in the modification of the electrode surface by an ODN sequence that contains two domains. One domain is capable of forming a GQ structure, which binds the hemin and is used as amplification strategy. The other is an aptamer domain able to specifically bind the analyte, which may form or not a GQ structure. In the presence of the analyte and hemin, the hemin/GQ structures were formed on the electrode surface, while the analyte protein was bound to the aptamer part. This strategy was successfully used to design a hemin/GQ DNAzyme electrochemical biosensor for the detection of adenosine monophosphate (AMP) [84]. Upon interaction of a hairpin ODN sequence with AMP, the AMP-aptamer complex was formed, leading to the hairpin opening and the formation of the hemin/GQ complex. On the other hand, the adenosine deaminase was able to convert the AMP substrate into inosine monophosphate that lacked the affinity for the aptamer sequence. The sensor achieved a the 1 [micro]M detection limit for AMP [84].

Adenosine triphosphate (ATP) was detected at a hemin/GQ DNAzyme electrochemical biosensor that used two aptamers for ATP and for hemin recognition [85]. Two ODN sequences were designed, the first one immobilized on a gold electrode surface and containing the ATP aptamer and a part of the hemin aptamer and the second one containing the complementary strand of ATP aptamer and the rest of hemin aptamer. In the presence of ATP, the duplex between the two ODN sequences opened, the second ODN sequence diffused into the solution, and the hemin/GQ DNAzyme electrochemical current disappeared.

A dual-functional electrochemical biosensor for ATP and [H.sub.2][O.sub.2] from cancer cells was developed based on a hemin/G-quadruplex DNAzyme [86]. The double-stranded conformation of the ATP aptamer, immobilized on gold electrodes, changed upon ATP binding, forming a stable GQ, and a hemin/G-quadruplex DNAzyme, after addition of hemin, was formed. The electrochemical current of the Fc redox label increased in the presence of both ATP and [H.sub.2][O.sub.2].

A hemin/G4 DNAzyme based impedimetric biosensor was used to detect the environmental metabolite 2-hydroxyfluorene (2-HOFlu) [87]. Using the hemin/G4 peroxidase activity to catalyze the oxidation of 2-HOFlu by [H.sub.2][O.sub.2], the sensor achieved a 2-HOFlu detection limit of 1.2 nM in water and 3.6 nM in spiked lake water samples. The assay was also selective over other fluorene derivatives.

Hemin/GQ DNAzyme electrochemical biosensors for the detection of other organic compounds, such as the toxin microcystin-LR [88] and the pollutant agent naphthol [89], were also described.

3.3. Proteins. Due to aptamers' high selectivity, sensitivity, and reliability, the electrochemical biosensors are also very attractive tools for protein detection. TBA was the first aptamer observed in NMR studies to fold into a GQ structure [90], and it was shown that GQ formation is critical for thrombin specific recognition. TBA remains nowadays the most widely used aptamer in GQ electrochemical biosensors research. However, GQ aptamers that bind specifically to other protein targets have been selected, for example, nucleolin, signal transducer and activator of transcription STAT3, human RNase H1, protein tyrosine phosphatase Shp2, VEGF, HIV-1 integrase, HIV-1 reverse transcriptase, HIV-1 reverse transcriptase, HIV-1 nucleocapsid protein, M. tuberculosis polyphosphate kinase 2, sclerostin, and insulin [78].

3.3.1. Folding-Based G-Quadruplex Electrochemical Biosensor. Many GQ electrochemical biosensors for the detection of proteins are based on the aptamer structural modifications in the presence of the analyte, from a single-, double-strand, or hairpin configuration, into a GQ configuration. Generally, they consist in an aptamer modified with a redox label immobilized on the electrode surface, while the analyte is present in solution [91, 92], Scheme 5.

The first folding-based GQ electrochemical biosensor for thrombin was prepared by covalently attaching methylene blue (MB) labelled TBA sequences d(T[A.sub.2]G[T.sub.2]CATCT[C.sub.4][G.sub.2][T.sub.2][G.sub.2]TGT[G.sub.2][T.sub.2] [G.sub.2]T) [93] and d([T.sub.2][C.sub.2][A.sub.2]C[G.sub.2][T.sub.2][G.sub.2]TGT[G.sub.2][T.sub.2][G.sub.2]) [94] to gold electrode surfaces. In the absence of thrombin, the immobilized TBA sequences remained unfolded, allowing the MB label to be in close proximity to the electrode surface and electron transfer occurred. Upon thrombin binding, the electron transfer between the MB redox label and the gold surface was stopped, due to the GQ aptamer formation. Similar GQ electrochemical biosensors for thrombin were developed, using the TBA sequence d([G.sub.2][T.sub.2][G.sub.2]TGT[G.sub.2][T.sub.2][G.sub.2]) labelled with Fc [95-97], and [Fe.sub.3][O.sub.4]-nanoparticles [98].

In another approach, the folding-based GQ electrochemical biosensor for thrombin was prepared by covalently attaching to a gold electrode an ODN sequence that contained a 15-base TBA sequence at its 3' end and formed a double-helix with a MB-tagged partially complementary ODN sequence [99]. In the presence of thrombin, the 15-base TBA sequence self-assembled into a GQ, releasing the 5' end of the MB-tagged ODN sequence as a flexible, single-stranded element and thus producing a detectable current. This strategy achieved an increase in current of ~300% with a saturated thrombin target, but the GQ electrochemical biosensor was not reusable. In a similar procedure, a TBA sequence d([C.sub.2][A.sub.2]C[G.sub.2][T.sub.2][G.sub.2]TGT[G.sub.2][T.sub.2][G.sub.2]) labelled with Fc immobilized on gold electrode was also employed [100].

A folding-based GQ electrochemical biosensor for thrombin was developed based on thrombin-induced split aptamer fragments conjunction [101]. The 15-base TBA sequence was split into two fragments, the d([A.sub.6][G.sub.2][T.sub.2][G.sub.2]TG) sequence that was attached to a gold electrode and the d(T[G.sub.2][T.sub.2][G.sub.2][T.sub.6]) sequence modified with a Fc redox label. The thrombin-induced association of the two fragments increased the concentration of Fc at the gold surface, which was monitored by voltammetry.

A label-free impedimetric folding-based GQ electrochemical biosensor for thrombin was developed based on an electropolymerized poly(pyrrole-nitrilotriacetic acid) film onto the surface of a platinum electrode, followed by complexation of [Cu.sup.2+] ions and immobilization of histidine-TBA sequences d([G.sub.2][T.sub.2][G.sub.2]TGT[G.sub.2][T.sub.2][G.sub.2][T.sub.5]) [102]. The biosensor presented high sensitivity for the detection and quantification of thrombin via EIS detection, without a labelling step.

Different electrode surface modification strategies have been used to improve the sensitivity of the GQ electrochemical biosensors, and examples may include the use of gold diskmicroelectrode arrays [103], gold electrode surface modified by polyamidoamine (PAMAM) dendrimer [104], GC electrode surface modified by gold nanoparticles [105] and multiwalled carbon nanotubes [106], magnetic nanobeads [107] and quantum dots-coated silica nanospheres [108], and gold nanoparticles [109] at graphite electrodes.

3.3.2. Sandwich-Type GQ Electrochemical Biosensor. Many aptamers recognize specifically different positions on the analyte, as in the case of TBA that recognizes both the fibrinogen and heparin binding sites of thrombin, a property that was used for the development of sandwich-type GQ electrochemical biosensors.

The first sandwich-type GQ electrochemical biosensor reported in the literature for thrombin detection presented an aptamer-analyte-aptamer format, Scheme 6(a), and led to the selective detection of 1 [micro]M of thrombin [110]. The sensor was built up by two aptamer layers, TBA 1 immobilized onto the gold electrode surface and used for capturing the thrombin analyte, and TBA 2, labelled with glucose dehydrogenase and used for the electrochemical detection, Scheme 6(a). The TBA sequences 15-mer d([G.sub.2][T.sub.2][G.sub.2]TGT[G.sub.2][T.sub.2][G.sub.2]) and 29-mer d(AGT[C.sub.2]GT[G.sub.2]TA[G.sub.3]CA[G.sub.2][T.sub.2][G.sub.4]TGACT) were used as either TBA 1 or TBA 2, and similar results were obtained. In a very similar methodology [111], the 29-mer TBA was labelled with pyrroloquinoline quinone (PQQ) redox cofactor glucose dehydrogenase (GDH), which led to a current increase due to the electroactive product generated by the enzyme reaction and allowed the selective detection of more than 10 nM of thrombin.

The limit of detection of sandwich-type GQ electrochemical biosensor with aptamer-analyte-aptamer format was further lowered by employing different types of redox labels on the TBA 2, such as peroxidase [112], platinum nanoparticles [113], gold nanoparticles [114], and cadmium sulphide quantum dots [115, 116]. Using a more complex design, based on conductive graphene-3,4,9,10-perylenetetracarboxylic dianhydride nanocomposites as sensor platform, and PtCo nanochains-thionine-Pt-horseradish peroxidase labelled secondary TBA sequences d([G.sub.2][T.sub.2][G.sub.2]TGT[G.sub.2][T.sub.2][G.sub.2]) for current amplification, a 6.5 x [10.sup.-16] M detection limit for thrombin was achieved [117].

A sandwich-type GQ electrochemical biosensor for thrombin detection with an antibody-analyte-aptamer format, Scheme 6(b), was also described [118]. The thrombin analyte was immobilized directly onto a nanogold-chitosan composite modified GC electrode surface, via a polyclone antibody. A 58-mer TBA sequence d(GACAGACGATGTGCTGACTACT[G.sub.2][T.sub.2][G.sub.2]TGA[G.sub.2][T.sub.2][G.sub.3] TAGTCAGCACATCGTCTGTC) labelled with MB was used for detection, and a 0.5 nM detection limit for thrombin was obtained [118].

In another approach, a sandwich-type GQ electrochemical biosensor for thrombin detection with an aptameranalyte-antibody format, Scheme 6(c), was applied [119]. The sensor was built up by immobilizing the thrombin analyte to gold nanoparticles-doped conducting polymer nanorods via TBA d([G.sub.2][T.sub.2][G.sub.2]TGT[G.sub.2][T.sub.2][G.sub.2]) sequences, the detection being performed with the Fc redox labelled antibody. The electrocatalytic oxidation of ascorbic acid by the Fc redox label allowed a low detection limit of 0.14 pM for thrombin. The biosensor was successfully tested in a real human serum sample for the detection of spiked concentrations of thrombin.

3.3.3. GQ DNAzyme Electrochemical Biosensor

(a) Hemin/GQ DNAzyme. Based on the peroxidase hemin/GQs DNAzyme characteristics, Scheme 4, different hemin/GQ DNAzyme electrochemical biosensors were described. A hemin/GQ DNAzyme electrochemical biosensor, based on a TBA d([G.sub.2][T.sub.2][G.sub.2]TGT[G.sub.2][T.sub.2][G.sub.2]) sequence, was applied for the thrombin detection [120]. In the presence of thrombin, the hemin/GQ DNAzyme activity increased, providing the amplified electrochemical readout currents, the sensor exhibiting high sensitivity and selectivity.

In a more complicated strategy, the thrombin detection was achieved using a dual current amplification scheme [121]. Gold nanoparticles were first electrodeposited onto single wall nanotube graphene modified electrode surface, for the immobilization of electrochemical probe of nickel hexacyanoferrates nanoparticles. Subsequently, another gold nanoparticles layer was electrodeposited for further immobilization of TBA sequences, which later formed the hemin/GQ DNAzyme. On the basis of the dual amplifying action, a detection limit of 2 pM for thrombin was obtained.

A hemin/GQ DNAzyme electrochemical biosensor for thrombin detection, based on background noise reduction by exonuclease I (Exo I), was also described [122]. The TBA sequences were self-assembled onto gold nanoparticles modified screen printed carbon electrode surfaces. In the absence of the target thrombin, the TBA sequences were digested by Exo I, which impeded the hemin association, significantly reducing the background current noise. The thrombin binding stabilized the TBA GQ and prevented it from being degraded by Exo I, the hemin/GQ complex formation generating the amplified electrochemical current. The introduction of Exo I significantly enhanced the current to noise ratio of the electrochemical sensor response.

An electrochemical aptasensor for thrombin that used the cocatalysis of hemin/GQ DNAzyme and octahedral [Cu.sub.2]OAu nanocomposites for signal amplification was designed [123]. Gold nanoparticles were grown directly on the surface of the octahedral [Cu.sub.2]O nanocrystals. The [Cu.sub.2]OAu nanocomposites obtained were simultaneously used for signal amplifying molecules and as nanocarriers. The hemin/GQ DNAzyme was formed by intercalating hemin into the d([G.sub.2][T.sub.2][G.sub.2]TGT[G.sub.2][T.sub.2][G.sub.2]) TBA sequences and the electroactive toluidine blue and was immobilized onto the [Cu.sub.2]O-Au nanocomposite surfaces. The aptasensor exhibited a detection limit of 23 fM for thrombin, good sensitivity, and high specificity [123].

Based on the hemin/GQs that can simultaneously act as NADH oxidase and peroxidase DNAzyme, different hemin/GQ DNAzyme electrochemical biosensors for the detection of thrombin were reported [124-127].

A pseudo triple-enzyme cascade electrocatalytic electrochemical biosensor for the determination of thrombin used the amplification of alcohol dehydrogenase-Pt-Pd nanowires bionanocomposite and hemin/GQ structure that simultaneously acted as NADH oxidase and peroxidase DNAzyme [127]. The alcohol dehydrogenase immobilized on the Pt-Pd nanowires catalyzed the ethanol present in the electrolyte into acetaldehyde, accompanied by NA[D.sup.+] being converted to NADH. Then the hemin/GQ acted first as NADH oxidase, converting the produced NADH to NA[D.sup.+], and then the hemin/GQ complex acting as peroxidase DNAzyme catalyzed the reduction of the produced [H.sub.2][O.sub.2].

Another strategy used porous platinum nanotubes labelled with glucose dehydrogenase and hemin/GQ complexes acting as both NADH oxidase and peroxidase DNAzyme, which led to a cascade signal amplification and allowed the detection limit of thrombin down to 0.15 pM level [128].

The Pebrine disease related Nosema bombycis spore wall protein was detected at a hemin/GQ DNAzyme electrochemical biosensor [129], using the amplification of hemin/GQ DNAzyme functionalized with Pt-Pd nanowires, that again acted as both NADH oxidase and peroxidase, the sensor exhibiting good linear range and detection limit.

Several reports on hemin/GQ DNAzyme electrochemical biosensors used the electrocatalytic properties of the DNAzyme to detect the activities of enzymes and their substrates. In fact, the first hemin/GQ DNAzyme electrochemical biosensor study followed the glucose oxidase (GOx) activity, by attaching the GOx to the gold electrode surface through a nucleic acid sequence able to form GQs in the presence of hemin, Scheme 7 [84]. The GOx mediated the glucose oxidation to gluconic acid and [H.sub.2][O.sub.2] and the [H.sub.2][O.sub.2] detection by its electrocatalyzed reduction by the DNAzyme. The concentration of [H.sub.2][O.sub.2] generated upon the interaction of the modified electrode with glucose, was proportional to the concentration of glucose, and the system could quantitatively determine the glucose substrate. In another report, a multiple current amplification strategy for glucose detection, based on hollow PtCo nanochains functionalized by DNAzyme and GOx, as well as Fc-labelled secondary TBA sequences [130], proved to be able to distinguish the target protein from interfering molecules.

Mammalian Argonaute 2 (Ago2) protein is the key player of RNA-induced silencing complexes, regulating gene function through RNA interference. A hemin/GQ DNAzyme electrochemical biosensor for the detection of Ago2 protein and study of its RNA endonuclease activity was developed [131]. A hairpin ODN structure, which contained a GQ domain that recognized the hemin and a domain that specifically recognized the target mRNA sequences complex with Ago2, was immobilized onto gold electrode surface. In the presence of Ago2, the hairpin was cleaved into two pieces and the hemin region become free and formed a stable hemin/GQ complex in the presence of [K.sup.+] ions. The results showed that Ago2 catalyzed the cleavage of target RNA in the absence of any biological partners or ATP and maintained the catalytic activity, in a wide range of pH and temperature.

The adenosine deaminase (ADA) activity was detected at a hemin/GQ DNAzyme electrochemical biosensor [132], which employed an ODN sequence with three functional domains, an adenosine aptamer domain, a GQ domain, and a linker domain, immobilized on a gold electrode. In the presence of adenosine, the adenosine aptamer formed a close-packed tight structure with the adenosine. However, upon addition of ADA in the test solution, adenosine was converted into inosine due to the catalytic reaction, and the release of inosine made the adenosine aptamer region flexible again. The ADA inhibition was also studied in the presence of erythro-9-(2-hydroxy-3-nonyl) adenine hydrochloride inhibitor.

A DNA-based electrochemical method for the detection of alkaline phosphatase (AP) activity has been developed that used a DNA polymerase terminal deoxynucleotidyl transferase (TdT) and hemin/GQ DNAzyme nanowires acting as both NADH oxidase and peroxidase [133]. A 3'-phosphorylated double-stranded DNA probe was immobilized on a gold nanoparticles modified GC electrode. In the presence of AP, the 3'-phosphoryl end of the DNA probe becomes dephosphorylated, and the TdT catalyzed the DNA probe extension with a poly(T) sequence. Then, a G-rich DNA strand was hybridized with the poly(T) sequence of the DNA probe, which then formed a hemin/GQ DNAzyme in the presence of hemin. In the presence of NADH, the hemin/GQ DNAzyme oxidized NADH to NA[D.sup.+], accompanied by the formation of [H.sub.2][O.sub.2], which was further catalyzed by the DNAzyme. The developed biosensor presented good sensitivity, selectivity, reproducibility, and stability, showing promising practical applications in AP activity assay.

(b) [Cu.sup.2+]/GQ DNAzyme. Besides hemin, it was demonstrated that the human telomeric DNA assembled with [Cu.sup.2+] ions can present DNAzyme activity, being able to catalyze the Friedel-Crafts reaction in water with excellent enantioselectivity [134, 135]. Based on a [Cu.sup.2+]/GQ DNAzyme, an electrochemical method for pyrophosphatase (PPase) activity detection was developed [136]. In the absence of PPase, [Cu.sup.2+] coordinated with pyrophosphate (PPi) to form a [Cu.sup.2+]-PPi compound. In the presence of PPase, the PPase catalyzed the hydrolysis of PPi into inorganic phosphate and produced free [Cu.sup.2+], which self-assembled to the G-rich DNA on the screen printed gold electrode surface and formed a [Cu.sup.2+] /GQ DNAzyme. Using 3,3',5,5'-tetramethylbenzidine as a redox mediator, the [Cu.sup.2+]/GQ DNAzyme catalyzed the reduction of [H.sub.2][O.sub.2] to generate a quantitative chronoamperometric signal. This method was additionally applied to screen the sodium fluoride inhibitor for PPase [136].

3.4. Cancer Cells. With the increase demand on the development of new strategy for cancer early detection, GQ electrochemical biosensors have the potential to be important tools for cancer cell detection in early cancer diagnosis. A hemin/GQ DNAzyme electrochemical biosensor for the detection of human liver hepatocellular carcinoma cells (HepG2) was proposed [137], based on the thiolated TLS11a aptamer attached to a gold electrode specific recognition of the target HepG2 cells. Hemin/GQ modified gold nanoparticles were also used for current amplification. After the electrochemical detection, the activation potential of-0.9 to -1.7 V was used to regenerate the gold electrode surface, the gold electrode showing good reusability.

In another approach, the HepG2 cells were detected at sandwich-type hemin/GQ DNAzyme electrochemical biosensor [138], with thiolated TLS11a aptamers attached to the gold nanoparticles modified GC electrode surface. The hemin-GQs were immobilized on Au-Pd coreshell nanoparticle-modified magnetic Fe3O4/MnO2 beads (Fe3O4/MnO2/Au-Pd). The hemin/GQ DNAzymes catalyzed the oxidation of hydroquinone with [H.sub.2][O.sub.2], amplifying the electrochemical current and improving the detection sensitivity.

4. Conclusions

This review discussed the recent advances on the electrochemical characterization, design, and applications of G-quadruplex electrochemical biosensors in the evaluation of metal ions, G-quadruplex ligands, and other small organic molecules, proteins, and cells. The incubation time and cations concentration dependence in controlling the G-quadruplex folding, stability, and formation of complex quadruplex-based nanostructures at the surface of carbon electrodes were discussed.

The different G-quadruplex electrochemical biosensors design strategies: the detection, via redox labels, of the G-rich DNA probe folding into a G-quadruplex structure after binding the analyte, the use of G-quadruplex aptamers, as recognition elements to capture the analyte, and the use of hemin/G-quadruplex DNAzymes, for electrochemical current amplification, were revisited.

G-quadruplex aptamer and/or DNAzymes-based biosensing strategies hold great promise for future applications in various fields, ranging from medical diagnostics and treatment to environmental monitoring and food safety. When compared with immunoassay-based biosensors, aptamer and/or DNAzymes-based electrochemical biosensors are particularly promising for the detection of small molecular targets, since it is difficult to produce highly specific antibodies for small molecules.

Understanding the G-quadruplex folding and stability at the solid-liquid interface of the electrochemical transducers is one of the fundamental challenges of the G-quadruplex electrochemical biosensors development and applications. The electroanalytical characterization using combined electrochemical and surface characterization techniques, of the G-quadruplexes redox behaviour and adsorption process, is crucial and emerges as an important and necessary step for the development of new, more sensitive, G-quadruplex electrochemical biosensors. More powerful signal amplification strategies are also estimated to be developed, in order to overcome the small concentrations of the molecular targets in real medical and environment samples, which may limit the biosensor sensitivity.

Conflicts of Interest

The authors declare that they have no conflicts of interest.


Financial support from Fundacao para a Ciencia e Tecnologia (FCT), Grant SFRH/BPD/92726/2013 (A.-M. Chiorcea-Paquim), Project UID/EMS/00285/2013 (cofinanced by the European Community Fund FEDER), FEDER funds through the program COMPETE, Programa Operacional Factores de Competitividade, and Innovec'EAU (SOE1/P1/F0173) are gratefully acknowledged.


[1] M. Zahid, B. Kim, R. Hussain, R. Amin, and S. Park, "DNA nanotechnology: a future perspective," Nanoscale Research Letters, vol. 8, article 119, 2013.

[2] A. M. Oliveira Brett, S. H. P. Serrano, and A. J. P. Piedade, "Electrochemistry of DNA," in Applications of Kinetic Modelling, R. G. Compton, Ed., vol. 37 of Comprehensive Chemical Kinetics, pp. 91-119, Elsevier, Amsterdam, Netherlands, 1999.

[3] A. M. Oliveira Brett, "DNA-based biosensors," in Comprehensive Analytical Chemistry, L. Gorton, Ed., vol. 44, pp. 179-208, Elsevier, Amsterdam, Netherlands, 2005.

[4] A. M. O. Brett, "Electrochemistry for probing DNA damage," in Encyclopedia of Sensors, C. A. Grimes, E. C. Dickey, and M. V. Pishko, Eds., p. 301, American Scientific Publishers, 2006.

[5] A. M. Oliveira Brett, "Electrochemical DNA assays," in Bioelectrochemistry: Fundamentals, Experimental Techniques and Applications, P. N. Bartlett, Ed., pp. 411-442, John Wiley & Sons, Chichester, UK, 2008.

[6] A. O. Oliveira Brett, "Nanobioelectrochemistry," in Electrochemistry at the Nanoscale, P. Schmuki and S. Virtanen, Eds., Nanostructure Science and Technology, pp. 407-433, Springer, New York, NY, USA, 2009.

[7] A. M. Oliveira Brett, V. C. Diculescu, A. M. Chiorcea-Paquim, and S. H. P. Serrano, "DNA-electrochemical biosensors for investigating DNA damage," in Comprehensive Analytical Chemistry, vol. 49, pp. 413-437, 2007.

[8] A.-M. Chiorcea-Paquim, S. C. B. Oliveira, V. C. Diculescu, and A. M. Oliveira-Brett, "Applications of DNA-electrochemical biosensors in cancer research," in Comprehensive Analytical Chemistry, vol. 77, pp. 287-336, 2017.

[9] V. C. Diculescu, A.-M. C. Paquim, and A. M. O. Brett, "Electrochemical DNA sensors for detection of DNA damage," Sensors, vol. 5, no. 6-10, pp. 377-393, 2005.

[10] A. M. Oliveira-Brett, A. M. C. Paquim, V. C. Diculescu, and J. A. P. Piedade, "Electrochemistry of nanoscale DNA surface films on carbon," Medical Engineering & Physics, vol. 28, no. 10, pp. 963-970, 2006.

[11] V. C. Diculescu, A.-M. Chiorcea-Paquim, and A. M. Oliveira-Brett, "Applications of a DNA-electrochemical biosensor," TrAC Trends in Analytical Chemistry, vol. 79, pp. 23-36, 2016.

[12] J. H. Shibata, "Nucleic Acids: Structures, Properties, and Functions (Bloomfield, Victor A.; Crothers, Donald M.; Tinoco, Ignacio, Jr.; contributions from Hearst, John E.; Wemmer, David E.; Kollman, Peter A.; Turner, Douglas H.)," Journal of Chemical Education, vol. 78, no. 3, p. 314, 2001.

[13] A.-M. Chiorcea-Paquim, P. V. Santos, and A. M. Oliveira-Brett, "Atomic force microscopy and voltammetric characterisation of synthetic homo-oligodeoxynucleotides," Electrochimica Acta, vol. 110, pp. 599-607, 2013.

[14] S. Zhang, Y. Wu, and W. Zhang, "G-quadruplex structures and their interaction diversity with ligands," ChemMedChem, vol. 9, no. 5, pp. 899-911, 2014.

[15] A. I. Karsisiotis and M. W. Da Silva, "Structural probes in quadruplex nucleic acid structure determination by NMR," Molecules, vol. 17, no. 11, pp. 13073-13086, 2012.

[16] M. Adrian, B. Heddi, and A. T. Phan, "NMR spectroscopy of G-quadruplexes," Methods, vol. 57, no. 1, pp. 11-24, 2012.

[17] D. Sun and L. H. Hurley, "Biochemical techniques for the characterization of G-quadruplex structures: EMSA, DMS footprinting, and DNA polymerase stop assay," in G-Quadruplex DNA, vol. 608 of Methods in Molecular Biology, pp. 65-79, Humana Press, 2010.

[18] G. N. Parkinson, M. P. H. Lee, and S. Neidle, "Crystal structure of parallel quadruplexes from human telomeric DNA," Nature, vol. 417, no. 6891, pp. 876-880, 2002.

[19] S. Haider, G. N. Parkinson, and S. Neidle, "Crystal structure of the potassium form of an Oxytricha nova G-quadruplex," Journal of Molecular Biology, vol. 320, no. 2, pp. 189-200, 2002.

[20] M. P. H. Lee, G. N. Parkinson, P. Hazel, and S. Neidle, "Observation of the coexistence of sodium and calcium ions in a DNA G-quadruplex ion channel," Journal of the American Chemical Society, vol. 129, no. 33, pp. 10106-10107, 2007.

[21] J.-L. Mergny, A. De Cian, A. Ghelab, B. Sacca, and L. Lacroix, "Kinetics of tetramolecular quadruplexes," Nucleic Acids Research, vol. 33, no. 1, pp. 81-94, 2005.

[22] S. Neidle, "DNA and RNA quadruplex structures," in Therapeutic Applications of Quadruplex Nucleic Acids, pp. 21-24, Elsevier, 2012.

[23] T. Simonsson, "G-quadruplex DNA structures--Variations on a theme," biological chemistry, vol. 382, no. 4, pp. 621-628, 2001.

[24] P. L. Tran, A. De Cian, J. Gros, R. Moriyama, and J. Mergny, "Tetramolecular quadruplex stability and assembly," in Quadruplex Nucleic Acids, vol. 330 of Topics in Current Chemistry, pp. 243-273, Springer, Berlin, Germany, 2013.

[25] M. A. Keniry, "Quadruplex structures in nucleic acids," Biopolymers, vol. 56, no. 3, pp. 123-146, 2001.

[26] V. S. Chambers, G. Marsico, J. M. Boutell, M. Di Antonio, G. P. Smith, and S. Balasubramanian, "High-throughput sequencing of DNA G-quadruplex structures in the human genome," Nature Biotechnology, vol. 33, no. 8, pp. 877-881, 2015.

[27] P. Murat and S. Balasubramanian, "Existence and consequences of G-quadruplex structures in DNA," Current Opinion in Genetics & Development, vol. 25, pp. 22-29, 2014.

[28] A. Henderson, Y. Wu, Y. C. Huang et al., "Detection of G-quadruplex DNA in mammalian cells," Nucleic Acids Research, vol. 42, no. 2, pp. 860-869, 2014.

[29] M. M. Dailey, C. Hait, P. A. Holt et al., "Structure-based drug design: from nucleic acid to membrane protein targets," Experimental and Molecular Pathology, vol. 86, no. 3, pp. 141150, 2009.

[30] A. K. Todd, M. Johnston, and S. Neidle, "Highly prevalent putative quadruplex sequence motifs in human DNA," Nucleic Acids Research, vol. 33, no. 9, pp. 2901-2907, 2005.

[31] J. L. Huppert, "Hunting G-quadruplexes," Biochimie, vol. 90, no. 8, pp. 1140-1148, 2008.

[32] J. L. Huppert and S. Balasubramanian, "Prevalence of quadruplexes in the human genome," Nucleic Acids Research, vol. 33, no. 9, pp. 2908-2916, 2005.

[33] K. Hiyama, Ed., Telomeres and Telomerase in Cancer, Cancer Drug Discovery and Development, Humana Press, Totowa, NJ, USA, 2009.

[34] S. Neidle, "The structures of quadruplex nucleic acids and their drug complexes," Current Opinion in Structural Biology, vol. 19, no. 3, pp. 239-250, 2009.

[35] R. D. Gray, J. O. Trent, and J. B. Chaires, "Folding and unfolding pathways of the human telomeric G-quadruplex," Journal of Molecular Biology, vol. 426, no. 8, pp. 1629-1650, 2014.

[36] N. Borovok, N. Iram, D. Zikich et al., "Assembling of G-strands into novel tetra-molecular parallel G4-DNA nanostructures using avidin-biotin recognition," Nucleic Acids Research, vol. 36, no. 15, pp. 5050-5060,2008.

[37] N. Borovok, T. Molotsky, J. Ghabboun, D. Porath, and A. Kotlyar, "Efficient procedure of preparation and properties of long uniform G4-DNA nanowires," Analytical Biochemistry, vol. 374, no. 1, pp. 71-78, 2008.

[38] A. M. Oliveira Brett and A.-M. Chiorcea, "Effect of pH and applied potential on the adsorption of DNA on highly oriented pyrolytic graphite electrodes. Atomic force microscopy surface characterisation," Electrochemistry Communications, vol. 5, no. 2, pp. 178-183, 2003.

[39] A. M. Oliveira Brett and A.-M. Chiorcea, "Atomic force microscopy of DNA immobilized onto a highly oriented pyrolytic graphite electrode surface," Langmuir, vol. 19, no. 9, pp. 3830-3839, 2003.

[40] A.-M. Chiorcea Paquim, V. C. Diculescu, T. S. Oretskaya, and A. M. Oliveira Brett, "AFM and electroanalytical studies of synthetic oligonucleotide hybridization," Biosensors and Bioelectronics, vol. 20, no. 5, pp. 933-944, 2004.

[41] A. M. Oliveira Brett and A.-M. Chiorcea Paquim, "DNA imaged on a HOPG electrode surface by AFM with controlled potential," Bioelectrochemistry, vol. 66, no. 1-2, pp. 117-124,2005.

[42] A. M. Oliveira Brett, A.-M. Chiorcea Paquim, V. Diculescu, and T. S. Oretskaya, "Synthetic oligonucleotides: AFM characterisation and electroanalytical studies," Bioelectrochemistry, vol. 67, no. 2, pp. 181-190, 2005.

[43] A.-M. Chiorcea Paquim, T. S. Oretskaya, and A. M. Oliveira Brett, "Adsorption of synthetic homo- and heterooligodeoxynucleotides onto highly oriented pyrolytic graphite: atomic force microscopy characterization," Biophysical Chemistry, vol. 121, no. 2, pp. 131-141, 2006.

[44] A.-M. Chiorcea Paquim, T. S. Oretskaya, and A. M. Oliveira Brett, "Atomic force microscopy characterization of synthetic pyrimidinic oligodeoxynucleotides adsorbed onto an HOPG electrode under applied potential," Electrochimica Acta, vol. 51, no. 24, pp. 5037-5045, 2006.

[45] A. M. Chiorcea-Paquim, J. A. P. Piedade, R. Wombacher, A. Jaschke, and A. M. Oliveira-Brett, "Atomic force microscopy and anodic voltammetry characterization of a 49-Mer Diels-Alderase ribozyme," Analytical Chemistry, vol. 78, no. 24, pp. 8256-8264, 2006.

[46] A. M. Oliveira Brett, V. C. Diculescu, A. M. Chiorcea-Paquim, and S. H. Serrano, "DNA-electrochemical biosensors for investigating DNA damage," in Comprehensive Analytical Chemistry, vol. 49, pp. 413-437, Elsevier, 2007.

[47] A. M. Oliveira Brett and F.-M. Matysik, "Voltammetric and sonovoltammetric studies on the oxidation of thymine and cytosine at a glassy carbon electrode," Journal of Electroanalytical Chemistry, vol. 429, no. 1-2, pp. 95-99,1997.

[48] A. M. Oliveira-Brett, J. A. P. Piedade, L. A. Silva, and V. C. Diculescu, "Voltammetric determination of all DNA nucleotides," Analytical Biochemistry, vol. 332, no. 2, pp. 321-329, 2004.

[49] S. C. B. Carlos B. Oliveira and A. M. Oliveira-Brett, "DNA-Electrochemical Biosensors: AFM surface characterisation and application to detection of in situ oxidative damage to DNA," Combinatorial Chemistry & High Throughput Screening, vol. 13, no. 7, pp. 628-640, 2010.

[50] A.-M. Chiorcea-Paquim, P. V. Santos, R. Eritja, and A. M. Oliveira-Brett, "Self-assembled G-quadruplex nanostructures: AFM and voltammetric characterization," Physical Chemistry Chemical Physics, vol. 15, no. 23, pp. 9117-9124, 2013.

[51] A. D. Rodrigues Pontinha, A.-M. Chiorcea-Paquim, R. Eritja, and A. M. Oliveira-Brett, "Quadruplex nanostructures of d(TGGGGT): influence of sodium and potassium ions," Analytical Chemistry, vol. 86, no. 12, pp. 5851-5857, 2014.

[52] A.-M. Chiorcea-Paquim, A. D. R. Pontinha, and A. M. Oliveira-Brett, "Time-dependent polyguanylic acid structural modifications," Electrochemistry Communications, vol. 45, pp. 71-74, 2014.

[53] A.-M. Chiorcea-Paquim, A. D. R. Pontinha, R. Eritja et al., "Atomic force microscopy and voltammetric investigation of quadruplex formation between a triazole-acridine conjugate and guanine-containing repeat DNA sequences," Analytical Chemistry, vol. 87, no. 12, pp. 6141-6149, 2015.

[54] V. C. Diculescu, A.-M. Chiorcea-Paquim, R. Eritja, and A. M. Oliveira-Brett, "Thrombin-binding aptamer quadruplex formation: AFM and voltammetric characterization," Journal of Nucleic Acids, vol. 2010, Article ID 841932, pp. 1-8, 2010.

[55] V. C. Diculescu, A.-M. Chiorcea-Paquim, R. Eritja, and A. M. Oliveira-Brett, "Evaluation of the structure-activity relationship of thrombin with thrombin binding aptamers by voltammetry and atomic force microscopy," Journal of Electroanalytical Chemistry, vol. 656, no. 1-2, pp. 159-166, 2011.

[56] A.-M. Chiorcea-Paquim, P. Santos, V. C. Diculescu, R. Eritja, and A. M. Oliveira-Brett, "Electrochemical characterization of guanine quadruplexes," in Guanine Quartets: Structure and Application, pp. 100-109, Royal Society of Chemistry, Cambridge, UK, 2012.

[57] A.-M. Chiorcea-Paquim and A. M. Oliveira-Brett, "Redox behaviour of G-quadruplexes," Electrochimica Acta, vol. 126, pp. 162-170, 2014.

[58] A.-M. ChiorceaPaquim, P. Santos, V C. Diculescu, R. Eritja, and A. M. Oliveira-Brett, Guanine Quartets: Structure and Application, L. Spindler and W. Fritzsche, Eds., Royal Society of Chemistry, Cambridge, UK, 2012.

[59] A.-M. Chiorcea-Paquim and A. M. Oliveira-Brett, "Guanine quadruplex electrochemical aptasensors," Chemosensors, vol. 4, no. 3, p. 13, 2016.

[60] A. De Rache, T. Doneux, and C. Buess-Herman, "Electrochemical discrimination between G-quadruplex and duplex DNA," Analytical Chemistry, vol. 86, no. 16, pp. 8057-8065, 2014.

[61] D. Bhattacharyya, G. M. Arachchilage, and S. Basu, "Metal cations in G-quadruplex folding and stability," Frontiers in Chemistry, vol. 4, article 38, 2016.

[62] M. Ebrahimi, J. B. Raoof, and R. Ojani, "Design of a novel electrochemical biosensor based on intramolecular G-quadruplex DNA for selective determination of lead(II) ions," Analytical and Bioanalytical Chemistry, vol. 409, no. 20, pp. 4729-4739, 2017.

[63] F. Li, Y. Feng, C. Zhao, and B. Tang, "Crystal violet as a G-quadruplex-selective probe for sensitive amperometric sensing of lead," Chemical Communications, vol. 47, no. 43, pp. 11909-11911, 2011.

[64] A.-E. Radi and C. K. O'Sullivan, "Aptamer conformational switch as sensitive electrochemical biosensor for potassium ion recognition," Chemical Communications, no. 32, pp. 3432-3434, 2006.

[65] J. Zhang, Y. Wan, L. Wang, S. Song, D. Li, and C. Fan, "Switchable charge transport path via a potassium ions promoted conformational change of G-quadruplex probe monolayer," Electrochemistry Communications, vol. 10, no. 9, pp. 1258-1260, 2008.

[66] Z.-S. Wu, C.-R. Chen, G.-L. Shen, and R.-Q. Yu, "Reversible electronic nanoswitch based on DNA G-quadruplex conformation: a platform for single-step, reagentless potassium detection," Biomaterials, vol. 29, no. 17, pp. 2689-2696, 2008.

[67] Z. Chen, L. Chen, H. Ma, T. Zhou, and X. Li, "Aptamerbiosensor for label-free impedance spectroscopy detection of potassium ion based on DNA G-quadruplex conformation," Biosensors and Bioelectronics, vol. 48, pp. 108-112, 2013.

[68] J. Zhang, J. Chen, R. Chen, G. Chen, and F. Fu, "An electrochemical biosensor for ultratrace terbium based on Tb3+ promoted conformational change of human telomeric G-quadruplex," Biosensors and Bioelectronics, vol. 25, no. 2, pp. 378-382, 2009.

[69] Z. Lin, Y. Chen, X. Li, and W. Fang, "Pb2+ induced DNA conformational switch from hairpin to G-quadruplex: Electrochemical detection of Pb2+," Analyst, vol. 136, no. 11, pp. 2367-2372, 2011.

[70] G.-C. Han, X.-Z. Feng, and Z. Chen, "Hemin/G-quadruplex DNAzyme for designing of electrochemical sensors," International Journal of Electrochemical Science, vol. 10, pp. 3897-3913, 2015.

[71] Z. Zhang, J. Yin, Z. Wu, and R. Yu, "Electrocatalytic assay of mercury(II) ions using a bifunctional oligonucleotide signal probe," Analytica Chimica Acta, vol. 762, pp. 47-53, 2013.

[72] G. Pelossof, R. Tel-Vered, and I. Willner, "Amplified surface plasmon resonance and electrochemical detection of Pb2+ ions using the Pb2+-dependent DNAzyme and hemin/G-quadruplex as a label," Analytical Chemistry, vol. 84, no. 8, pp. 3703-3709, 2012.

[73] Y. Yuan, M. Gao, G. Liu, Y. Chai, S. Wei, and R. Yuan, "Sensitive pseudobienzyme electrocatalytic DNA biosensor for mercury(II) ion by using the autonomously assembled hemin/G-quadruplex DNAzyme nanowires for signal amplification," Analytica Chimica Acta, vol. 811, pp. 23-28, 2014.

[74] A.-M. Chiorcea-Paquim, A. D. R. Pontinha, and A. M. Oliveira-Brett, "Quadruplex-targeting anticancer drug BRACO-19 voltammetric and AFM characterization," Electrochimica Acta, vol. 174, no. 1, pp. 155-163, 2015.

[75] A. D. R. Pontinha, S. Sparapani, S. Neidle, and A. M. Oliveira-Brett, "Triazole-acridine conjugates: Redox mechanisms and in situ electrochemical evaluation of interaction with double-stranded DNA," Bioelectrochemistry, vol. 89, pp. 50-56, 2013.

[76] R. Aghaei, M. Mazloum-Ardakani, M. Abdollahi-Alibeik et al., "A new electrochemical biosensor based on telomeric G-quadruplex DNA: in silico and experimental study of dihydropyridine derivatives potential effect on telomerase inhibition," Journal of Electroanalytical Chemistry, vol. 796, pp. 24-32, 2017.

[77] M. Y. Elahi, S. Z. Bathaie, M. F. Mousavi, R. Hoshyar, and S. Ghasemi, "A new DNA-nanobiosensor based on G-quadruplex immobilized on carbon nanotubes modified glassy carbon electrode," Electrochimica Acta, vol. 82, pp. 143-151, 2012.

[78] W. O. Tucker, K. T. Shum, and J. A. Tanner, "G-quadruplex DNA Aptamers and their Ligands: Structure, Function and Application," Current Pharmaceutical Design, vol. 18, no. 14, pp. 2014-2026, 2012.

[79] N. Prabhakar, Z. Matharu, and B. D. Malhotra, "Polyaniline Langmuir-Blodgett film based aptasensor for ochratoxin A detection," Biosensors and Bioelectronics, vol. 26, no. 10, pp. 4006-4011, 2011.

[80] G. Castillo, I. Lamberti, L. Mosiello, and T. Hianik, "Impedimetric DNA aptasensor for sensitive detection of ochratoxin A in food," Electroanalysis, vol. 24, no. 3, pp. 512-520, 2012.

[81] A. Hayat, S. Andreescu, and J.-L. Marty, "Design of PEG-aptamer two piece macromolecules as convenient and integrated sensing platform: application to the label free detection of small size molecules," Biosensors and Bioelectronics, vol. 45, no. 1, pp. 168-173, 2013.

[82] J. Zhang, J. Chen, X. Zhang, Z. Zeng, M. Chen, and S. Wang, "An electrochemical biosensor based on hairpin-DNA aptamer probe and restriction endonuclease for ochratoxin A detection," Electrochemistry Communications, vol. 25, pp. 5-7, 2012.

[83] Q. Yang, Y. Nie, X. Zhu, X. Liu, and G. Li, "Study on the electrocatalytic activity of human telomere G-quadruplex-hemin complex and its interaction with small molecular ligands," Electrochimica Acta, vol. 55, no. 1, pp. 276-280, 2009.

[84] G. Pelossof, R. Tel-Vered, J. Elbaz, and I. Willner, "Amplified biosensing using the horseradish peroxidase-mimicking DNAzyme as an electrocatalyst," Analytical Chemistry, vol. 82, no. 11, pp. 4396-4402, 2010.

[85] L. Liu, Z. Liang, and Y. Li, "Label free, highly sensitive and selective recognition of small molecule using gold surface confined aptamers," Solid State Sciences, vol. 14, no. 8, pp. 1060-1063, 2012.

[86] Z. Wang, C. Lu, J. Liu, J. Xu, and H. Chen, "An improved G-quadruplex DNAzyme for dual-functional electrochemical biosensing of adenosines and hydrogen peroxide from cancer cells," Chemical Communications, vol. 50, no. 10, pp. 1178-1180, 2014.

[87] G. Liang and X. Liu, "G-quadruplex based impedimetric 2-hydroxyfluorene biosensor usinghemin as a peroxidase enzyme mimic," Microchimica Acta, vol. 182, no. 13-14, pp. 2233-2240, 2015.

[88] Y. Zhu, L. Xu, W. Ma et al., "G-quadruplex DNAzyme-based microcystin-LR (toxin) determination by a novel immunosensor," Biosensors and Bioelectronics, vol. 26, no. 11, pp. 4393-4398, 2011.

[89] G. Liang, X. Liu, and X. Li, "Highly sensitive detection of a-naphthol based on G-DNA modified gold electrode by electrochemical impedance spectroscopy," Biosensors and Bioelectronics, vol. 45, no. 1, pp. 46-51, 2013.

[90] K. Y. Wang, S. McCurdy, R. G. Shea, S. Swaminathan, and P. H. Bolton, "A DNA aptamer which binds to and inhibits thrombin exhibits a new structural motif for DNA," Biochemistry, vol. 32, no. 8, pp. 1899-1904, 1993.

[91] A. A. Lubin and K. W. Plaxco, "Folding-based electrochemical biosensors: the case for responsive nucleic acid architectures," Accounts of Chemical Research, vol. 43, no. 4, pp. 496-505,2010.

[92] N. Meini, C. Farre, C. Chaix, R. Kherrat, S. Dzyadevych, and N. Jaffrezic-Renault, "A sensitive and selective thrombin impedimetric aptasensor based on tailored aptamers obtained by solid-phase synthesis," Sensors and Actuators B: Chemical, vol. 166-167, pp. 715-720, 2012.

[93] Y. Xiao, A. A. Lubin, A. J. Heeger, and K. W. Plaxco, "Label-free electronic detection of thrombin in blood serum by using an aptamer-based sensor," Angewandte Chemie, vol. 117, no. 34, pp. 5592-5595, 2005.

[94] G. S. Bang, S. Cho, and B.-G. Kim, "A novel electrochemical detection method for aptamer biosensors," Biosensors & Bioelectronics, vol. 21, no. 6, pp. 863-870, 2005.

[95] A.-E. Radi, J. L. A. Sanchez, E. Baldrich, and C. K. O'Sullivan, "Reusable impedimetric aptasensor," Analytical Chemistry, vol. 77, no. 19, pp. 6320-6323, 2005.

[96] A.-E. Radi, J. L. Acero Sanchez, E. Baldrich, and C. K. O'Sullivan, "Reagentless, reusable, ultrasensitive electrochemical molecular beacon aptasensor," Journal of the American Chemical Society, vol. 128, no. 1, pp. 117-124, 2006.

[97] J. E. L. E. A. Sanchez, E. Baldrich, A. E. E. G. Radi et al., "Electronic 'off-on' molecular switch for rapid detection of thrombin," Electroanalysis, vol. 18, no. 19-20, pp. 1957-1962, 2006.

[98] S. Zhang, G. Zhou, X. Xu et al., "Development of an electrochemical aptamer-based sensor with a sensitive [Fe.sub.3][O.sub.4] nanopaticle-redox tag for reagentless protein detection," Electrochemistry Communications, vol. 13, no. 9, pp. 928-931, 2011.

[99] Y. Xiao, B. D. Piorek, K. W. Plaxco, and A. J. Heegert, "A reagentless signal-on architecture for electronic, aptamer-based sensors via target-induced strand displacement," Journal of the American Chemical Society, vol. 127, no. 51, pp. 17990-17991, 2005.

[100] M. Mir, A. T. A. Jenkins, and I. Katakis, "Ultrasensitive detection based on an aptamer beacon electron transfer chain," Electrochemistry Communications, vol. 10, no. 10, pp. 1533-1536, 2008.

[101] J. Chen, J. Zhang, J. Li, H.-H. Yang, F. Fu, and G. Chen, "An ultrasensitive signal-on electrochemical aptasensor via target-induced conjunction of split aptamer fragments," Biosensors and Bioelectronics, vol. 25, no. 5, pp. 996-1000, 2010.

[102] H. Xu, K. Gorgy, C. Gondran et al., "Label-free impedimetric thrombin sensor based on poly(pyrrole-nitrilotriacetic acid)aptamer film," Biosensors and Bioelectronics, vol. 41, no. 1, pp. 90-95, 2013.

[103] H.-Y. Bai, F. J. D. Campo, and Y.-C. Tsai, "Sensitive electrochemical thrombin aptasensor based on gold disk microelectrode arrays," Biosensors and Bioelectronics, vol. 42, no. 1, pp. 17-22, 2013.

[104] Z. Zhang, W. Yang, J. Wang, C. Yang, F. Yang, and X. Yang, "A sensitive impedimetric thrombin aptasensor based on polyamidoamine dendrimer," Talanta, vol. 78, no. 4-5, pp. 1240-1245, 2009.

[105] X. Li, L. Shen, D. Zhang et al., "Electrochemical impedance spectroscopy for study of aptamer-thrombin interfacial interactions," Biosensors and Bioelectronics, vol. 23, no. 11, pp. 1624-1630, 2008.

[106] X. Liu, Y. Li, J. Zheng, J. Zhang, and Q. Sheng, "Carbon nanotube-enhanced electrochemical aptasensor for the detection of thrombin," Talanta, vol. 81, no. 4-5, pp. 1619-1624, 2010.

[107] G. Cheng, B. Shen, F. Zhang et al., "A new electrochemically active-inactive switching aptamer molecular beacon to detect thrombin directly in solution," Biosensors and Bioelectronics, vol. 25, no. 10, pp. 2265-2269, 2010.

[108] Y. Li, L. Deng, C. Deng, Z. Nie, M. Yang, and S. Si, "Simple and sensitive aptasensor based on quantum dot-coated silica nanospheres and the gold screen-printed electrode," Talanta, vol. 99, pp. 637-642, 2012.

[109] E. Suprun, V. Shumyantseva, T. Bulko et al., "Au-nanoparticles as an electrochemical sensing platform for aptamer-thrombin interaction," Biosensors and Bioelectronics, vol. 24, no. 4, pp. 825-830, 2008.

[110] K. Ikebukuro, C. Kiyohara, and K. Sode, "Electrochemical detection of protein using a double aptamer sandwich," Analytical Letters, vol. 37, no. 14, pp. 2901-2909, 2004.

[111] K. Ikebukuro, C. Kiyohara, and K. Sode, "Novel electrochemical sensor system for protein using the aptamers in sandwich manner," Biosensors and Bioelectronics, vol. 20, no. 10, pp. 2168-2172, 2005.

[112] M. Mir, M. Vreeke, and I. Katakis, "Different strategies to develop an electrochemical thrombin aptasensor," Electrochemistry Communications, vol. 8, no. 3, pp. 505-511, 2006.

[113] R. Polsky, R. Gill, L. Kaganovsky, and I. Willner, "Nucleic acid-functionalized Pt nanoparticles: catalytic labels for the amplified electrochemical detection of biomolecules," Analytical Chemistry, vol. 78, no. 7, pp. 2268-2271, 2006.

[114] B. Li, Y. Wang, H. Wei, and S. Dong, "Amplified electrochemical aptasensor taking AuNPs based sandwich sensing platform as a model," Biosensors and Bioelectronics, vol. 23, no. 7, pp. 965-970, 2008.

[115] A. Numnuam, K. Y. Chumbimuni-Torres, Y. Xiang et al., "Aptamer-based potentiometric measurements of proteins using ion-selective microelectrodes," Analytical Chemistry, vol. 80, no. 3, pp. 707-712, 2008.

[116] H. Yang, J. Ji, Y. Liu, J. Kong, and B. Liu, "An aptamer-based biosensor for sensitive thrombin detection," Electrochemistry Communications, vol. 11, no. 1, pp. 38-40, 2009.

[117] K. Peng, H. Zhao, X. Wu, Y. Yuan, and R. Yuan, "Ultrasensitive aptasensor based on graphene-3,4,9,10-perylenetetracarboxylic dianhydride as platform and functionalized hollow PtCo nanochains as enhancers," Sensors and Actuators B: Chemical, vol. 169, pp. 88-95, 2012.

[118] Y. Kang, K.-J. Feng, J.-W. Chen, J.-H. Jiang, G.-L. Shen, and R.-Q. Yu, "Electrochemical detection of thrombin by sandwich approach using antibody and aptamer," Bioelectrochemistry, vol. 73, no. 1, pp. 76-81, 2008.

[119] M. A. Rahman, I. S. Jung, M.-S. Won, and Y.-B. Shim, "Gold nanoparticles doped conducting polymer nanorod electrodes: ferrocene catalyzed aptamer-based thrombin immunosensor," Analytical Chemistry, vol. 81, no. 16, pp. 6604-6611, 2009.

[120] S. Xie, Y. Chai, Y. Yuan, L. Bai, and R. Yuan, "A novel electrochemical aptasensor for highly sensitive detection of thrombin based on the autonomous assembly of hemin/G-quadruplex horseradish peroxidase-mimicking DNAzyme nanowires," Analytica Chimica Acta, vol. 832, pp. 51-57, 2014.

[121] Y. Yuan, X. Gou, R. Yuan et al., "Electrochemical aptasensor based on the dual-amplification of G-quadruplex horseradish peroxidase-mimicking DNAzyme and blocking reagent-horseradish peroxidase," Biosensors and Bioelectronics, vol. 26, no. 10, pp. 4236-4240, 2011.

[122] B. Jiang, M. Wang, C. Li, and J. Xie, "Label-free and amplified aptasensor for thrombin detection based on background reduction and direct electron transfer of hemin," Biosensors and Bioelectronics, vol. 43, no. 1, pp. 289-292, 2013.

[123] S. Chen, P. Liu, K. Su et al., "Electrochemical aptasensor for thrombin using co-catalysis of hemin/G-quadruplex DNAzyme and octahedral Cu2O-Au nanocomposites for signal amplification," Biosensors and Bioelectronics, vol. 99, pp. 338-345, 2018.

[124] S. Xie, Y. Chai, R. Yuan, L. Bai, Y. Yuan, and Y. Wang, "A dual-amplification aptasensor for highly sensitive detection of thrombin based on the functionalized graphene-Pd nanoparticles composites and the hemin/G-quadruplex," Analytica Chimica Acta, vol. 755, pp. 46-53, 2012.

[125] Y. Yuan, R. Yuan, Y. Chai et al., "Hemin/G-quadruplex simultaneously acts as NADH oxidase and HRP-mimicking DNAzyme for simple, sensitive pseudobienzyme electrochemical detection of thrombin," Chemical Communications, vol. 48, no. 38, pp. 4621-4623, 2012.

[126] Y. Yuan, G. Liu, R. Yuan, Y. Chai, X. Gan, and L. Bai, "Dendrimer functionalized reduced graphene oxide as nanocarrier for sensitive pseudobienzyme electrochemical aptasensor," Biosensors and Bioelectronics, vol. 42, no. 1, pp. 474-480, 2013.

[127] Y. Zheng, Y. Chai, Y. Yuan, and R. Yuan, "A pseudo triple-enzyme electrochemical aptasensor based on the amplification of Pt-Pd nanowires and hemin/G-quadruplex," Analytica Chimica Acta, vol. 834, no. 1, pp. 45-50, 2014.

[128] A. Sun, Q. Qi, X. Wang, and P. Bie, "Porous platinum nanotubes labeled with hemin/G-quadruplex based electrochemical aptasensor for sensitive thrombin analysis via the cascade signal amplification," Biosensors and Bioelectronics, vol. 57, pp. 16-21, 2014.

[129] Q. Wang, Y. Song, Y. Chai et al., "Electrochemical immunosensor for detecting the spore wall protein of Nosema bombycis based on the amplification of hemin/G-quadruplex DNAzyme concatamers functionalized Pt at Pd nanowires," Biosensors and Bioelectronics, vol. 60, pp. 118-123, 2014.

[130] L. Bai, R. Yuan, Y. Chai, Y. Yuan, Y. Zhuo, and L. Mao, "Bienzyme functionlized hollow PtCo nanochains as labels for an electrochemical aptasensor," Biosensors and Bioelectronics, vol. 26, no. 11, pp. 4331-4336, 2011.

[131] N. Yang, Y. Cao, P. Han, X. Zhu, L. Sun, and G. Li, "Tools for investigation of the RNA endonuclease activity of mammalian Argonaute2 protein," Analytical Chemistry, vol. 84, no. 5, pp. 2492-2497, 2012.

[132] K. Zhang, X. Zhu, J. Wang, L. Xu, and G. Li, "Strategy to fabricate an electrochemical aptasensor: application to the assay of adenosine deaminase activity," Analytical Chemistry, vol. 82, no. 8, pp. 3207-3211, 2010.

[133] Y. Liu, E. Xiong, X. Li, J. Li, X. Zhang, and J. Chen, "Sensitive electrochemical assay of alkaline phosphatase activity based on TdT-mediated hemin/G-quadruplex DNAzyme nanowires for signal amplification," Biosensors and Bioelectronics, vol. 87, pp. 970-975, 2017.

[134] C. Wang, Y. Li, G. Jia, Y. Liu, S. Lu, and C. Li, "Enantioselective Friedel-Crafts reactions in water catalyzed by a human telomeric G-quadruplex DNA metalloenzyme," Chemical Communications, vol. 48, no. 50, pp. 6232-6234, 2012.

[135] C. Wang, G. Jia, J. Zhou et al., "Enantioselective diels-alder reactions with G-quadruplex DNA-based catalysts," Angewandte Chemie International Edition, vol. 51, no. 37, pp. 9352-9355,2012.

[136] Y. Wang, Y. Wu, W. Liu et al., "Electrochemical strategy for pyrophosphatase detection Based on the peroxidase-like activity of G-quadruplex-[Cu.sup.2+] DNAzyme," Talanta, vol. 178, pp. 491-497, 2018.

[137] D. Sun, J. Lu, Z. Chen, Y. Yu, and M. Mo, "A repeatable assembling and disassembling electrochemical aptamer cytosensor for ultrasensitive and highly selective detection of human liver cancer cells," Analytica Chimica Acta, vol. 885, pp. 166-173,2015.

[138] D. Sun, J. Lu, Y. Zhong et al., "Sensitive electrochemical aptamer cytosensor for highly specific detection of cancer cells based on the hybrid nanoelectrocatalysts and enzyme for signal amplification," Biosensors and Bioelectronics, vol. 75, pp. 301-307, 2016.

Ana-Maria Chiorcea-Paquimfe, (1) Ramon Eritja, (2) and Ana Maria Oliveira-Brett (1)

(1) Department of Chemistry, Faculty of Sciences and Technology, University of Coimbra, 3004-535 Coimbra, Portugal

(2) CIBER-BBN, Institute for Advanced Chemistry of Catalonia (IQAC), Spanish Council for Scientific Research (CSIC), Jordi Girona 18-26, 08034 Barcelona, Spain

Correspondence should be addressed to Ana Maria Oliveira-Brett;

Received 17 August 2017; Revised 25 October 2017; Accepted 5 November 2017; Published 31 January 2018

Academic Editor: Tom Marsh

Caption: FIGURE 1: DP voltammograms baseline corrected at a GC electrode, solutions of ((a) black solid line) 20 [micro]M guanine (G), adenine (A), thymine (T), and cytosine (C); ((a) black dashed line) 20 [micro]M uracil (U) in pH 7.4; (b) 60 [micro]g m[L.sup.-1] DNA (black solid line) double-strand and (black dashed line) single-strand in pH 4.5; ((c) red solid line) 40 [micro]gm[L.sup.-1] poly(dG); ((c) black solid line) 40 [micro]gm[L.sup.-1] poly(dA), 100 [micro]gm[L.sup.-1] poly(dT), 100 [micro]gm[L.sup.-1] poly(dC), and 250 [micro]gm[L.sup.-1] poly(dU) in pH 7.4. [Adapted from [48, 49] with permission.]

Caption: FIGURE 2: (a) Representation of d[(G).sub.10]-GQ and GQ-based nanowire; (b) AFM image of 0.3 [micro]M d[(G).sub.10] in pH 7.0,100 mM [K.sup.+] ions, at 24h incubation; (c, d) DP voltammograms baseline corrected in 3.0 [micro]M d[(G).sub.10] in pH 7.0: (c) incubation time dependence and (d) [K.sup.+] ions concentration dependence at 0h incubation. [Adapted from [50] with permission.]

Caption: FIGURE 3: (a) AFM image of 0.3 [micro]M d(T[G.sub.4]T) in pH 7.0, in the presence of [Na.sup.+] and [K.sup.+] ions, at different incubation times; (b) representation of the d(T[G.sub.4]T) single-strand and GQ electrochemical detection; (c) DP voltammograms baseline corrected in 3.0 [micro]M d(T[G.sub.4]T) in pH 7.0: incubation time and [K.sup.+] ions concentration dependence. [Adapted from [51] with permission.]

Caption: FIGURE 4: (a-c) AFM images of 5 [micro]g m[L.sup.-1] poly(G) in pH 7.0, in the presence of [K.sup.+] ions, at (a) 0 h, (b) 24 h, and (c) 21 days' incubation; (d) DP voltammograms baseline corrected in 100 [micro]gm[L.sup.-1] poly(G) in pH 7.0, in the presence of [K.sup.+] ions, at (red dashed line) 0h, (black solid line) 24h, (black dashed line) 10 days, and (red solid line) 21 days' incubation and control (black dashed-dotted line) 3 [micro]M d[(G).sub.10] at 24 h incubation; (e-g) representation of poly(G) adsorption process: (e) poly(G) single-strand, (f) poly(G) single-strand with short GQ regions, and (g) poly(G) single-strand with larger GQ regions. [Reproduced from [52] with permission.]

Caption: FIGURE 5: DP voltammograms baseline corrected in 3.0 [micro]M d(T[G.sub.4]T) incubated with 4.0 [micro]M GL15 in pH 7.0, at different incubation times, in the presence: (a) [Na.sup.+] and (b) [K.sup.+] ions. [Adapted from [53] with permission.]

Caption: SCHEME 1: DNA-electrochemical biosensor: the analyte interaction with the DNA recognition layer immobilized at the electrode surface is electrochemically detected.

Caption: SCHEME 2: (a) Chemical structure of DNA nucleotides, nucleosides, and bases, (b) Watson-Crick base-pairing and G-quartet, and (c) G-quadruplex configurations. [Adapted from [11,13] with permission.]

Caption: SCHEME 3: Folding-based GQ electrochemical biosensor for the detection of metal ions.

Caption: SCHEME 4: Hemin/G-quadruplex peroxidase-mimicking DNAzyme operating mode.

Caption: SCHEME 5: Folding-based GQ electrochemical biosensor for the detection of proteins.

Caption: SCHEME 6: Sandwich-type GQ electrochemical biosensors for the detection of thrombin: (a) aptamer-analyte-aptamer, (b) antibody-analyteaptamer, and (c) aptamer-analyte-antibody.

Caption: SCHEME 7: Hemin/G-quadruplex DNAzyme electrochemical biosensor for the detection of glucose.
COPYRIGHT 2018 COPYRIGHT 2010 SAGE-Hindawi Access to Research
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2018 Gale, Cengage Learning. All rights reserved.

Article Details
Printer friendly Cite/link Email Feedback
Author:Chiorcea-Paquimfe, Ana-Maria; Eritja, Ramon; Oliveira-Brett, Ana Maria
Publication:Journal of Nucleic Acids
Date:Jan 1, 2018
Previous Article:G-Quadruplexes (GQU).
Next Article:Putative HIV and SIV G-Quadruplex Sequences in Coding and Noncoding Regions Can Form G-Quadruplexes.

Terms of use | Privacy policy | Copyright © 2022 Farlex, Inc. | Feedback | For webmasters |