Electro Standards Adds Model 7300 A/B Switch with Automatic Fallback to Their Line of Network Switches.
The DB15 remote port of the Model 7300 accepts contact closure signals from a Model 4077 or other similar device to remotely attain switch position status or remotely control the switch position and mode. All pins of the DB25 interface are switched and switch ports are transparent to all data. All switched signals are passed via latching copper contact relays that maintain their position and continuity even in the event of a power loss or failure. When power is restored, the unit loads previous position and mode of operation checking DIP switch setting and remote port to determine the correct startup configuration.
The Model 7300 is also certified compliant with the following EMC Regulations: EN 55022:2006/A1:2007 Class A ITE Emissions Requirements (EU), ICES-003 Issue 4 Class A Digital Apparatus Emissions Requirements (Canada) and FCC 47 CFR Part 15 Class A Emissions Requirements (USA). This unit is also certified compliant with Safety Regulation: EN 60950-1 including deviations to UL/CSA 60950-1 2nd edition.
A CE and UL listed table mount Wide Range Power Supply option with 100 VAC/240 VAC, 50Hz/60Hz and IEC 60320 C14 inlet is available in place of standard power module to support international applications (Cat No 517277).
For a catalog of Electro Standards' Network Switches, call 401-943-1164, email eslab@ElectroStandards.com, or visit www.ElectroStandards.com.
Electro Standards Laboratories
Contact via Email