Printer Friendly

Eductor alternative: a new range of pvdf eductors, are a viable alternative to the more expensive stainless models as Finishing found out.

Storing liquids in tanks is essential for many process industry applications, for example chemicals for finishing and surface treatment applications, as is the need to agitate the contents to avoid separation and sedimentation. Fluids can be recirculated through tanks to achieve separation which helps to optimise chemical action in dip tanks, although the process can be enhanced by the introduction of eductor nozzles.

For many applications eductor nozzles made from brass or stainless steel (as opposed to plastics such as polypropylene) will be the preferred choice, especially if the chemicals are aggressive, or are stored at higher temperatures. However, the new range of pvdf eductors, recently introduced by The Spray Nozzle People (Bete Ltd), are a viable alternative to the more expensive stainless models. PVDF (Kynar) is an incredibly chemically resistant fluoroplastic and has superior heat resistance compared too many other plastics. Furthermore, these new PVDF options are offered at significantly lower cost than stainless steel equivalents.

Eductors are submerged inside the tank and the motive liquid is pumped under pressure though the discharge orifice. The jet of liquid enters the venturi section, entraining additional liquid from the tank and moving it through the venturi. A discharge plume of combined motive and entrained liquid exits the venturi and continues the mixing and agitating action for a substantial distance effectively multiplying the liquid flow. Depending on the model and the operating pressure, the volume of liquid discharged from the eductor will be up to 4 or 5 times greater than the volume of motive liquid being pumped. This highly efficient operation reduces energy use and therefore cuts costs.


Eductors can be used effectively wherever chemicals are being stored inside closed tanks yet need to be agitated.

For example: in tanks used for plating, electrocoating and pre-treatment, phosphating, sludge, paint, anodizing, agricultural fertilizers and chemicals, pulp, slurries. There are also options for open tank applications, such as cooking grain, mash and starch, heating, as well as circulating and mixing.

More information on the new Kynar Eductors at:

COPYRIGHT 2016 Turret West Ltd.
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2016 Gale, Cengage Learning. All rights reserved.

Article Details
Printer friendly Cite/link Email Feedback
Title Annotation:POWDER COATING
Date:Mar 1, 2016
Previous Article:Taking the knocks: AkzoNobel says its new powder coating can take the knocks.
Next Article:Is it time to pig out? SUEZ Advanced Solutions UK has developed water technologies for the coatings industry.

Terms of use | Privacy policy | Copyright © 2021 Farlex, Inc. | Feedback | For webmasters |