Printer Friendly

EXFOLIATING AND TINGLING CLEANSING SAND.

                    Coast Southwest, Inc.
              Tel: 800-621-0500 * Fax: 714-524-8363
                   Email: info@coastsouthwest.com
                  Website: www.coastsouthwest.com

INGREDIENTS                                               WT%

Phase A
Olivatis 19 (Coast Southwest, Medolla Limited)             6.00
(Olive oil polyglyceryl-6 esters (and) phospholipids)
Olivatis 20 (Coast Southwest, Medolla Limited)             6.00
(Olive oil polyglyceryl-6 esters (and) lauryl glucoside)
Avocado Oil (Coast Southwest)                              1.00
(Persea gratissima (avocado) oil)
Golden Jojoba Oil                                          3.00
(Coast Southwest, Jojoba Desert (ACS.))
(Simmondsia chinensis (jojoba) seed oil)
Rose Hip Oil                                               4.00
(Coast Southwest, ICSC International Cosmetic Science
Centre) (Rosa canina fruit extract)
Endipure Moringa (Coast Southwest, Inc.)                   1.50
(Moringa oleifera seed oil)
Tomato Seed Oil                                            4.00
(Coast Southwest, ICSC International Cosmetic Science
Centre) (Solanum lycopersicum (tomato)
seed oil)
Mextract Lavender Distilled (Coast Southwest, Medolla)     2.00
(Lavandula angustifolia (lavender) flower extract)
Peppermint Essential Oil (Coast Southwest)                 2.50
(Mentha piperita (peppermint) oil)
Phase B
Ultrastarch P21C (Coast Southwest, Ultra Chemical)        22.00
(Zea mays (corn) starch)
Ultrastarch ASO (Coast Southwest, Ultra Chemical)         13.00
(Aluminum starch octenylsuccinate)
Endinol SCG Granular (Coast Southwest)                     7.00
(Sodium coco-sulfate)
Endinol Mild SLSA (Coast Southwest)                        8.00
(Sodium lauryl sulfoacetate)
Endipure Soapnut (Coast Southwest)                         3.00
(Sapindus mukurossi fruit extract)
Bamboo Silica (Bambusa arundinacea stem extract)          12.00
Ultrapure Bamboo Exfoliator                                5.00
(Coast Southwest, Ultra Chemical)
(Bambusa arundinacea stem extract)

PROCEDURE: Phase A - Add phase A materials in order to side vessel and
mix until uniform. Phase B - Combine phase B in formula order to main
vessel with continuous mixing. When uniform, add phase B to phase A
with continuous mixing. Powder will wet out and begin to bind together.
Transfer to final container. Note: A ribbon blender is suggested when
blending and incorporating powders and oils.

                             Eyessence with Eye'fective
                              Centerchem
                       Tel: 203-822-9800 * Fax: 203-822-9820
                           Email: cosmetics@centerchem.com
                         Website: www.centerchem.com

INGREDIENTS                                      WT%

Phase A
Deionized water                                  78.12
Propanediol                                       7.00
Isopentyldiol, pentylene glycol, 1,2-hexanediol   5.00
Citric acid, 50%                                  0.15
Pentylene glycol                                  4.00
1,2-Hexanediol                                    2.00
Eye'Fective (Provital/Centerchem)                 2.00
Edelweiss Eco (Provital/Centerchem)               1.00
Phase B
Polyacrylate crosspolymer-6                       0.50
Phase C
Sodium hydroxide, 20%                             0.23

PROCEDURE: In vessel, solubilize all ingredients of phase A at room
temperature with mixing. Add phase B to phase A with continued mixing
until a homogeneous mixture is achieved. Adjust pH to 6.80-7.20 with
phase C.

                      Hydrating Body Wash (Sulfate-Free)
                        Colonial Chemical, Inc.
                     Tel: 423-837-8800 * Fax: 423-837-3888
                        Website: www.colonialchem.com

INGREDIENTS                                              WT%
Water                                                    q.s. to 100

Cola Det DEF-61 (Water, sodium C14-16 olefin sulfonate,  30.00
cocamidopropyl hydroxysultane, cocamide MIPA)
Cola Moist 200                                            3.00
(Hydroxoypropyl bis-hydroxethyldimonium chloride)
Oud Fragrance (Orchidia) (Fragrance)                      0.20
Euxyl K712 (schiilke and mayr)                            1.00
(Sodium benzoate and potassium sorbate)
Citric acid                                              q.s. to pH

PROCEDURE: Add first five ingredients in order, mixing until
homogeneous. Adjust to pH 5.0-5.5 with citric acid. PROPERTIES:
Appearance--clear liquid; pH--5.0-55; Viscosity--5,000-10,000 cP.

                   Instant Under-Eye Bag Relief
                           Croda
                  Website: www.crodapersonalcare.com

INGREDIENTS                                                 WT%

Phase A
Deionized water (Aqua)                                      61.35
Disodium EDTA                                                0.20
OptaSenseTM G40 (Croda) (Carbomer)                           0.45
Natrosol 250 HHR (Ashland) (Hydroxyethylcellulose)           0.20
Glycerin                                                     3.00
Part B
Sodium silicate                                             11.00
50% Citric acid (aq solution)                                2.50
Part C
Crodacol C95 (Croda) (Cetyl alcohol)                         2.00
Crodafos CS20A (Croda) (Cetearyl alcohol (and)               3.50
ceteth-20 phosphate (and) dicetyl phosphate)
Sensasil PCA (Sederma)                                       2.00
Crodamol STS (Croda) (PPG-3 benzyl ether myristate)          4.00
Crodamol GTCC (Croda)                                        2.00
(Caprylic/capric triglycerides)
Part B
Dow Corning 200/350 cst. (Dow Corning) (Dimethicone)         4.00
Dynalift (Sederma)                                           3.00
Part E
Phenonip P4 (Clariant) (Phenoxyethanol (and) -               0.80
methylparaben (and) ethylparaben (and) propylparaben (and)
butylparaben)

PROCEDURE: Combine part A ingredients with medium speed propeller
mixing, slowly dispersing the carbomer and hydroxyethylcellulose, while
making sure to check for lumps before proceeding. Initiate heating to
45[degrees]C and maintain temperature until the water phase is
homogenous and free of lumps. In a side kettle, heat all contents of
part C to 75-80[degrees]C. When part A is at 45[degrees]C, slowly add
sodium silicate (USE PPE) to the batch and continue medium speed
propeller mixing until uniform. Viscosity might go up when adding the
sodium silicate because of the carbomer thickening but it will slowly
go down when adding the balance of the sodium silicate. The pH of the
system will climb to approximately 12. When uniform, qs and add 50%
citric acid aqueous solution to the batch to obtain a pH of 6.00-7.00.
Continue medium to high speed propeller mixing until uniform. A gradual
increase of viscosity is expected. Increase mixing speed as needed.
Continue heating the batch at 75-80[degrees]C. When parts A, B and C
are at 75-80[degrees]C and uniform, emulsify by transferring part AB
to a homogenizer and add part C to part AB slowly. Homogenize for 5-10
minutes or until uniform. When uniform, stop homogenizing and transfer
to side sweep mixing. Cool to room temperature. When the batch is at
50[degrees]C, add part D and continue side sweep mixing until uniform.
When at 40[degrees]C, add part E and continue side sweep mixing until
uniform. At room temperature, stop mixing and check specifications.
PROPERTIES: Appearance--Medium viscosity off-white emulsion, free of
foreign matter; Viscosity (TD@10RPM,1min): 150,000cps +/- 10%;
Stability--1 month at 50[degrees]C and 12 weeks RT, 40[degrees]C,
45oC and 5X - 24 hour freeze-thaw cycle.

                        Damage Repair Sulfate Free Shampoo
                         Lincoln Fine Ingredients, Inc.
                         Tel: 800-296-4942
                      Email: Formulations@LincolnFineIngredients.com
                      Website: wwww.licolnfineingredients.com

INGREDIENTS                                             WT%

Phase A
Water                                                   45.17
Rheomer 33T (Polyacrylate-33)                            3.00
Linquest EDTA 100 (Disodium EDTA)                        0.05
Miracare Soft S 525 (Water, sodium cocoyl isethionate,  15.00
sodium methyl oleyl taurate, cocamide MIPA, decyl
glucoside, cocamidopropyl hydroxysultaine)
Linapon AG 12 (Lauryl glucoside)                        15.00
Mackanate EL-P (Sodium laureth sulfosuccinate)          15.00
Phase B
Polycare Split Therapy                                   0.10
(Hydroxypropyl guar hydroxypropyltrimonium chloride )    0.10
Citric acid 50%                                          0.10
Glycerin 99% USP K                                       5.00
Batch Cont.
Lincare ACO (Styrene/acrylates copolymer)                0.50
Sodium hydroxide (50%)                                   0.08
Lincoserve HpH-6                                         1.00
(Phenoxyethanol, caprylyl glycol, ethylhexylglycerin)

                         SCT4151 360 Shield BB Cream
                              Sensient
                          Tel: 908-757-4500
                       Email: cosmeticsales@sensient-tech.com
                        Website: www.sensient-cosmetics.com

INGREDIENTS                                                   WT%

Phase A1
DI water (Sensient)                                           q.s.
Laponite KLG-XR (Eckart America)                               0.50
(Lithium magnesium sodium silicate)
Phase A2
Zemea Propanediol (Dupont, Tate & Lyle) (Propanediol)          3.00
Unipure Yellow LC 188 PHY (Sensient)                           0.55
(CI 77492 (and) phytic acid (and) sodium hydroxide)
Unipure Red LC 388 PHY (Sensient)                              0.15
(CI 77491 (and) phytic acid (and) sodium hydroxide)
Unipure Black LC 998 PHY (Sensient)                            0.05
(CI 77499 (and) phytic acid (and) sodium hydroxide)
Phase A3
Covacryl RH (Sensient) (Sodium polyacrylate)                   0.40
Glycerin                                                       2.00
Euxyl PE-9010 (schiilke)                                       0.70
(Phenoxyethanol (and) ethylhexylglycerin)
5% Natpure CellGum Plus in Water (Sensient)                    5.00
(Microcrystalline cellulose (and) cellulose gum
(and) cellulose)
Phase B
Covascreen UVR CCT (Sensient) (Caprylic/capric tri-           15.00
glyceride (and) titanium dioxide (and)
triethoxycaprylylsilane)
Montanov 68 (Seppic)                                           3.00
(Cetearyl alcohol (and) cetearyl glucoside)
Jeechem GMS 165 (Jeen)                                         1.50
(Glyceryl stearate (and) PEG-100 stearate)
Dermofeel Sensolv (Evonik Dr. Straetmans)                      1.00
(Isoamyl laurate)
Covabead Crystal (Sensient) (Calcium sodium borosilicate)      3.00
Cetyl stearyl alcohol (Seppic) (Cetearyl alcohol)              1.50
Florasun 90 (Floratech)                                        4.50
(Helianthus annuus (sunflower) seed oil)
Phase C
Natpure Film GR (Sensient) (Glyceryl rosinate                  5.00
(and) aqua (and) cellulose (and) sodium sulfate)
Diamond (Sensient) (Fragrance)                                 0.10
Phase D
20% Citric acid in water (Citric acid)                      pH=7.0

PROCEDURE: Premix phase Al until clear. Premix phase A2 and A3. Add
phase A2 into Al under moderate shear at 500rpm for 10 minutes. 2.Add
phase A3 into phase A under moderate shear. Mix phase A until
homogenous for 5 minutes. Heat phase A to 75[degrees]C. 3.Prepare phase
B and heat to 75[degrees]C. Mix under moderate shear. 4.Add phase B to
phase A at 75[degrees]C with high shear at 1,500 rpm for 1 minute.
Homogenize the batch at 5,000rpm for 3 minutes at 75[degrees]C. 5.Mix
the batch with propeller blade, decrease the mixing speed to 500 rpm.
Cool down the batch to 40[degrees]C. Add phase C into the batch.
Continue to mix for 5 minutes. 6.At 25[degrees]C, adjust the pH to 7.0
by adding 20% citric acid in water into the batch.

                        Radiant Tone-Up Facial Cream
                               Lubrizol
                           Tel: 800-379-5389
                       Website: www.lubrizol.com/personal-care

INGREDIENTS                                                WT%

Phase A
Deionized water                                            57.00
Avalure Flex-6 Polymer (Lubrizol)                           0.80
(Polyurethane-62 (and) trideceth-6,)
Carbopol Aqua SF-1 OS polymer (Lubrizol)                    3.00
(Acrylates copolymer)
Glycerin                                                    5.00
Butylene glycol                                             5.00
Disodium EDTA (10%)                                         1.00
Phenoxyethanol                                              0.50
Red 33 (1%) (Sun Chemical)                                  0.45
Yellow 6 (10%) (Sun Chemical)                               0.35
Ronaflair Balance Gold (Merck)                              2.00
(Titanium dioxide (and) mica (and) tin oxide)
Ronaflair Balance Red (Merck)                               4.00
(Titanium dioxide (and) mica (and tin oxide)
Schercemol NGDO Ester (Lubrizol)                           15.00
(Neopentyl glycol diethylhexanoate)
Glucate SS Emulsifier (Lubrizol)                            1.00
(Methyl glucose sesquistearate)
Phase C
Sodium hydroxide (18%)                                      0.70
Phase D
Brighlette Marine Ingredient (Lipotec SAU)                  2.00
(Butylene glycol (and) aqua (and) plankton extract)
Lumicease Blue Ingredient (Lipotec SAU)                     2.00
(Glycerin (and) water (aqua) (and) hydrolyzed pea protein
(and) glucose (and) sodium chloride (and)
sodium succinate)
Reflet de lumiere #121716 (Symrise) (Fragrance)             0.20

PROCEDURE: Part A: Disperse Avalure Flex-6 polymer into the batch and
mix until a translucent homogeneous dispersion is obtained. Add
Carbopol Aqua SF-1 OS polymer and ingredient 4-11 of Part A
successively into the batch. Mix well between each addition. Part B: In
a separate vessel, add Schercemol NGDO ester and Glucate SS. Mix at
55-60[degrees]C until complete dissolution. Add Part B to Part A and
mix until uniform. Neutralize with sodium hydroxide (18%) to pH ~7. Mix
until uniform. Add Brighlette, Lumicease, and fragrance successively
into the main vessel and mix until uniform. PROPERTIES:
Appearance--Peach pearlized glossy cream; pH--6.8-7.3; Viscosity
(mPa*s) Brookfield RVT Viscosimeter (Brookfield AMETEK, Inc.) spindle
#7 @ 20 rpm, 25[degrees]C @ 24 hours--30,000-40,000; Stability--Passed
1 month at 50[degrees]C and 3 months at RT & 40[degrees]C; Passed 5
cycles Freeze/thaw.
Product formulas are supplied by producers of raw materials. Included in
some instances are sources of supply for the raw materials and
instructions for preparation and use of the finished product. No
guarantee of performance or safety is implied by Happi. For more
complete details, readers should contact the suppliers directly using
the telephone number or website provided with each formula. If your
company has a formula that you think would be of interest to
readers of Happi, marketers of soaps and detergents; cosmetics and
toiletries; fragrances; waxes and polishes; disinfectants and
sanitizers and other chemical specialties, we will be pleased to
consider it for publication. Address all material to: Formulary
Editor, Happi, 25 Philips Parkway, Montvale, NJ 07645 USA;
Email: tbranna@rodmanmedia.com
COPYRIGHT 2018 Rodman Publishing
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2018 Gale, Cengage Learning. All rights reserved.

Article Details
Printer friendly Cite/link Email Feedback
Title Annotation:Formulary
Publication:Household & Personal Products Industry
Date:Nov 1, 2018
Words:1853
Previous Article:SPA REVENUES AND TOTAL VISITS RISE IN 2017.
Next Article:NESTLE EXPLORING OPTIONS FOR SKIN HEALTH UNIT.

Terms of use | Privacy policy | Copyright © 2021 Farlex, Inc. | Feedback | For webmasters |