Printer Friendly

Dual-Channel Frame Grabber.

The PIXCI[R] SV7 Frame Grabber has two BNC jacks for NTSC, RS-170, PAL, or CCIR composite video cameras. The two inputs are independent, allowing capture of different resolution or format. Images may be transferred at full or reduced frame rates to computer memory for processing and/or analysis by the host computer. Transfer also is supported to any other target on the PCI Express bus.


Programmable gain, hue, brightness, saturation, and contrast adjustments are available to condition the video signal. SMA connectors provide TTL trigger in and strobe out. Up to four PIXCI SV7 boards in one computer can simultaneously capture video from up to eight sources. The XCAP-Lite imaging program is included and allows independent capture and adjust dialogs for each input. EPIX,

COPYRIGHT 2010 NP Communications, LLC
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2010 Gale, Cengage Learning. All rights reserved.

Article Details
Printer friendly Cite/link Email Feedback
Publication:EE-Evaluation Engineering
Date:Jun 1, 2010
Previous Article:Five steps to a better EMC test: part 2.
Next Article:Dual-Beam FIB/SEM for sub-32-nm devices.

Terms of use | Privacy policy | Copyright © 2019 Farlex, Inc. | Feedback | For webmasters