Printer Friendly

Down the drain: Greenpeace condemns PVC pipe despite its widespread appeal in the building products industry.

PVC IS EVERYWHERE. IT'S USED IN hundreds of products: automobile parts, packaging, home furnishings, and hospital supplies. But the single largest market for PVC is pipe. According to Bill Morris, technical sales manager for Charlotte, N.C.-based Charlotte Pipe and Foundry, about 70 percent of PVC production goes into construction and building materials--and 50 percent of that is pipe.

Even though PVC isn't the only pipe material available, many plumbers, contractors, and builders prefer it to alternative products because of its durability, ease of installation, and cost.

However, Greenpeace has launched a campaign against PVC. Bill Richardson, Greenpeace's national administration coordinator, asserts, "We're not anti-plastic, we're anti-PVC." Greenpeace believes that PVC is the most environmentally damaging of all plastics because of the toxic chlorine resin used and the dioxins released during its production.


While Greenpeace disapproves of the chlorine used in PVC, Morris reminds us that, "Chlorine is a naturally occurring material. It's on the periodic table." He asserts that the potential for a chlorine leak in PVC manufacturing facilities is very small because PVC manufacturers take extraordinary safety precautions.

Greenpeace stresses that even if all safety precautions are taken during PVC production, there is still a threat to human health when PVC burns. Burning PVC pipe releases toxic compounds including hydrogen chloride gas and dioxins, which can be lethal if inhaled. Greenpeace says that burning PVC presents serious health hazards to building occupants, fire fighters, and surrounding communities.

Regardless of Greenpeace's attempt to phase out PVC, plumbers, builders, and contractors continue to install it. Robert Danley, president of Danley Custom Builders in Moorestown, N.J., believes PVC is the best piping material available for drainage applications. "PVC has a much cleaner look, and plumbers like it, too," says Danley. He cites availability and ease of installation as the best features of PVC. About 90 percent of Danley's drainage, waste, and venting (DWV) applications use PVC. Of the remaining 10 percent, Danley chooses copper or cast iron.


PVC is not a cure-all for the piping industry. Aside from the environmental and health issues that surround PVC, PVC pipe is restricted to certain applications. According to Morris, "PVC is a cold water product," which is why it's used primarily for drainage. It is against most regulations to install PVC pipe to distribute hot and cold water because it becomes volatile at high temperatures.

A sister product of PVC, CPVC (chlorinated polyvinyl chloride), is capable of handling higher temperatures and can be used to channel water throughout the house. However, CPVC has an even higher chlorine content than PVC. "The extra chlorine makes CPVC less likely to bend under heat," says Allen Blakey, director of public affairs for The Vinyl Institute, which is based in Arlington, Va.

Other PVC alternatives include ABS (acrylonitrile butadiene styrene), a rigid black pipe used in DWV applications. "ABS weighs less than metal DWV systems" says Tracy Eaves, product manager for the Elkhart, Ind.-based piping product manufacturer, Nibco. Tins, Eaves says, helps save installation time. But on average, ABS is slightly more expensive than PVC, and its thermal expansion rate is nearly twice that of PVC.

Because cast iron pipe weighs and costs more than PVC, many plumbers opt for PVC instead. According to John Biggers, regional manager for Charlotte Pipe and Foundry, a recent study found that the average installed cost of cast iron pipe versus plastic pipe was some $200 more per bathroom. However, cast iron has a coefficient of thermal expansion that is one-fifth that of PVC. Cast iron pipe also dampens sound, which is something PVC doesn't do.

According to Morris, "PVC transmits noise from falling waste water," which many homeowners don't want to live with. Installing cast iron pipe in sections of the house where PVC would otherwise transmit sound helps keep pipes quiet and homeowners happy.

Danley offers another alternative to combating noisy PVC pipes: He says that in noisy PVC situations, wrapping it with fiberglass insulation will help eliminate the sound of waste water.

Despite Greenpeace's efforts, PVC continues to be a dominant force in the pipe market. Most likely it will remain so if plumbers, contractors, and builders continue to praise PVC for its practicality. Granted, no one product satisfies everyone. There are, however, a number of piping products available that meet individual needs and applications. Whether the aim is to build green, increase margins, or improve reputations, selecting the right pipe is one more way to satisfy clients and be proud of the finished product.
COPYRIGHT 2001 Hanley-Wood, Inc.
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2001 Gale, Cengage Learning. All rights reserved.

Article Details
Printer friendly Cite/link Email Feedback
Author:Milano, Scott
Article Type:Brief Article
Geographic Code:1USA
Date:Nov 1, 2001
Previous Article:Housing undaunted: Starts and sales remain above last year's pace. (Vital signs).
Next Article:Helping hands: Builders quickly pitch in with victim's relief fund to help those in need. (From the president).

Terms of use | Privacy policy | Copyright © 2022 Farlex, Inc. | Feedback | For webmasters |