Printer Friendly

Developments in Rubber Technology, vol. 4.

Developments In Rubber Technology - 4

This volume, the fourth in a series which began in 1979, covers a greater variety of subjects than any previous single volume. The selection of contributions has been based on current topical interest; hence the tailor-making of polymers to develop specific properties, methods of improving compound processability and the use of rubbers in the oil industry are featured alongside a discussion of safety aspects.

The service life and performance of a rubber product are dependent on the rubber chosen, together with the types and quantities of compounding ingredients which are incorporated. Careful selection of the vulcanizing system, filler, plasticizer and protective agent may enable a rubber to give a satisfactory performance in conditions which ordinarily would be considered beyond its range. The design of a rubber product is another important factor which influences its behavior and affects its length of service.

The topics covered include plasticizers, processing aids, quality control of rubber processing, elastomers, nitrile rubbers, epoxy resins, safety aspects and adhesion of rubbers to tire cords.

The contributions in this volume are by the foremost authorities in their respective fields. This book will be of particular interest to all rubber and plastics technologists in the industry as well as academia, raw materials suppliers and research institutes and libraries.
COPYRIGHT 1990 Lippincott & Peto, Inc.
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 1990, Gale Group. All rights reserved. Gale Group is a Thomson Corporation Company.

Article Details
Printer friendly Cite/link Email Feedback
Publication:Rubber World
Article Type:Book Review
Date:Feb 1, 1990
Previous Article:Micro weighments of compound ingredients.
Next Article:Custom mixing directory.

Related Articles
Developments in Rubber and Rubber Composites, vol. 2.
Nylon 6,6 adhesion to natural rubber.
Optimizing mixing performance through filler dispersion control.
Rubber Processing.
Modeling rubber products--materials characterization for "quasi-static" FEA. (Tech Service).
Modeling rubber products- "quasi-static" finite element analyses and validation testing. (Tech Service).
Processing effects on NR aging characteristics.
Effect of recycled dust stop lubricating oil in rubber compounds.
Review of common rubber factory problems and published causes and solutions--part I.
Review of common rubber factory problems and published causes and solutions--part II.

Terms of use | Copyright © 2017 Farlex, Inc. | Feedback | For webmasters