Printer Friendly

Development of antibody-coated magnetite nanoparticles for biomarker immobilization.

1. Introduction

Nanomedicine is generally defined as the biomedical application of nanotechnology. Nanomagnetism is at the forefront of the nanosciences as magnetic nanomaterials are the most promising materials used in the clinical diagnosis and in various therapeutic applications [1, 2]. Magnetic particles have special features that make them viable for biomedical applications [3]. Their particle size can be controlled in the nanometric scale and they can be functionalized with biocompatible molecules to interact with biological entities. Many researchers have been focusing on the nanoscale because magnetic nanoparticles contain a simple magnetic domain and show a superparamagnetic behavior at room temperature, which means that the magnetization M is close to zero in the absence of a magnetic field, but when an external magnetic field is applied, the magnetic moments are aligned with the field [4]. This kind of magnetic response is highly desired in biomedical applications because these materials offer the possibility of being manipulated to a specific body area and target biological entities through an external stimulus. This ability of magnetic nanoparticles has allowed them to be used for labeling and manipulating biomolecules as drugs and genes [5-8]. Drug delivery is the most studied application of the magnetic nanoparticles in order to develop a new therapeutic method that increases the effectiveness of anticancer drug [9]. Magnetic drug targeting (MDT) has also been used to improve localized drug delivery to interstitial tumor targets. MDT involves attaching an antibody to the nanoparticles surface in order to get an antibody-antigen coupling ensuring an efficient and controlled drug release [10]. In order to improve the antibody adherence to the nanoparticles, they are coated with a biocompatible and/or biodegradable material to modify their surface. The coated material can be a natural polymer such as chitosan, collagen, folic acid, or a synthetic material like dextran, tetraethyl orthosilicate, poly-lactic-co-glycolic acid, polyethylene glycol, and so forth. These materials provide different functional groups attached to the surface of the nanoparticles as aldehyde (-CHO), hydroxyl (-OH), and amine (-N[H.sub.2]) [9, 11-14]. Biological entities, such as antibodies, are attached to the coated nanoparticles through bonding with these functional groups, and the type of ligand defines the effectiveness of these systems.

5,-Nucleotidase (5-ribonucleotide phosphohydrolase; 5eNT) is an intrinsic membrane glycoprotein present as an ectoenzyme in a wide variety of mammalian cells. An increased 5eNT concentration is a bioindicator of hepatobiliary and osseous disease [15, 16]. In this study, magnetite nanoparticles coated with antibody against 5eNT were developed and adherence of antibody against 5eNT was investigated with diverse coated materials. The effectiveness of functional groups such as silanol and amine was determined. A double shell nanoparticle was developed in order to improve the antibody adherence. Increase in the antibody content of the nanoparticles improved the effectiveness of the MDT systems as a result of better antibody-antigen coupling.

2. Experimental Procedures

2.1. Synthesis of Magnetite Nanoparticles. Magnetic nanoparticles ([Fe.sub.3][O.sub.4]) were prepared by coprecipitation with a rapid injection method. The starting material was a mixture of 1.3519 g of Fe[Cl.sub.3] x 6[H.sub.2]O (Sigma Aldrich, CAS no. 10025-77-1) and 0.6820 g of FeS[O.sub.4] x 7[H.sub.2]O in 25 mL of distilled water. Subsequently, 25 mL of N[H.sub.4]OH was added abruptly in a rapid injection process to increase the pH value to 12. A black precipitate was formed; it was washed several times until the supernatant reached a pH value of 6.5. The precipitate was dried in a vacuum oven at 30 [+ or -] 5[degrees]C for 24 h.

2.2. Coated Magnetic Nanoparticles. To evaluate the enzymatic adherence to the nanoparticle surface, three different nanoparticles were obtained: magnetite with a silica shell (with hydroxyl group), magnetite with aminosilane shell (with amine group), and magnetite with a double shell silicaaminosilane. For magnetite with a silica shell (MS samples), 1.910 g of sodium silicate ([Na.sub.2]Si[O.sub.3]) was dissolved in 100 mL of deionized water in a flask, 0.20 g of [Fe.sub.3][O.sub.4] nanoparticles was added to this solution and sonicated using Ultra-Turrax for 30 minutes. Further, the temperature of the mixture was increased to 80[degrees]C and hydrochloric acid was added dropwise until pH 6.0 was attained. The material was then washed several times with deionized water by magnetic decantation. This procedure was repeated twice in order to ensure that the magnetite was coated with silica.

For magnetite with aminosilane shell (MA samples), 1.0 mL of N-(2-aminoethyl)-3 aminopropyltrimethoxysilane was dissolved in a solution containing 250 [micro]L [H.sub.2]O and 25 mL of methanol, and then 0.20 g of magnetite nanoparticles was added. The mixture was exposed to ultrasonic homogenizer for 30 minutes. Subsequently, 15 mL glycerol was added, and the temperature of the mix was increased to 90[degrees]C with rapid stirring for 6h. The product was washed several times with deionized water and methanol and concentrated by magnetic decantation; the material was dried at room temperature. For double shell silica-aminosilane nanoparticles (MSA samples), a similar methodology (as mentioned above) was used with the exception that the starting nanoparticles were precoated with silica.

2.3. Antibody Adherence to Coated Nanoparticles. Two types of antibodies against 5,-nucleotidase were used in order to compare antigen affinity: a commercially purified anti-CD73 monoclonal antibody (Ecto-5,-nucleotidase, 5F/B9, BD Pharmingen) (namely, CD73) and single chain fragment Fv monoclonal antibody obtained by phage display method (namely, ScFv) [16]. 100 [micro]L of antibodies solution was incubated in a flask containing 0.02 g of functionalized magnetic particles for 24 h at room temperature with slow agitation. The material was washed several times with 1.0 M, pH 7.4 phosphate buffer solution (PBS). Finally, the material was suspended in 100 [micro]L of PBS and stored at 4[degrees]C. The adherence of the antibody to functionalized magnetic nanoparticles (FMNPs) was determined by measuring absorbance at 280 nm in a UV-Vis spectrophotometer (Thermo Scientific Nanodrop 2000).

2.4. 5' -Nucleotidase Enzyme Separation. In order to evaluate the effect of the surface modification on 5'-nucleotidase (5eNT) separation, magnetite with no modification (M), silica-magnetite (MS), silica-aminosilane-magnetite (MSA), silica-amino silane-ScFv antibody-magnetite (MSACF), and silica-aminosilane-anti-CD73 antibody (MSA-CD73) were tested. In the first step, an initial solution of 1.0 M of the 5eNT (Sigma-Aldrich; CaS no. 9027-73-0) in PBS (Sigma-Aldrich, CAS no. 7447-40-7) pH 7.4, was incubated with 0.02 g of each material at room temperature for 24 h in a microcentrifuge tube in a rotator with gentle mixing. After the immobilization step, the magnetically loaded nanosorbents carrying probe enzymes were removed from the medium by applying an external magnetic field. Finally, separation efficiencies were determined by measuring the initial and final enzyme concentrations before and after the separation step using a Bradford colorimetric method at 595 nm wavelengths.

2.5. Characterization of Magnetite Nanoparticles. X-ray diffraction (XRD; PANalytical XRD84) was used to confirm the formation of the crystalline phase of magnetite ([Fe.sub.3][O.sub.4]). Field emission scanning electron microscopy (FESEM; JEOL 7000F) was used to analyze the morphology and particle size distribution was determined by using Scandium software with SEM images. The superparamagnetic behavior was confirmed by a vibrating sample magnetometer (VSM). Magnetic measurements were performed at room temperature in magnetic field up to 20kOe. The Fourier transform infrared spectra (FTIR; Thermo Scientific Nicolet 6700) was used to confirm the adherence of the polymeric shell to the nanoparticles. Enzyme and antibody adsorption on magnetite nanoparticles was analyzed in a UV-Vis spectrophotometer at a wavelength of 280 nm.

3. Results and Discussion

The XRD patterns of the nanoparticles obtained (M) in this study are shown in Figure 1. The spectra showed six characteristic diffraction peaks of an inverse spinel crystal of the magnetite structure. Average crystallite size was estimated from X-ray pattern by using Scherrer's formula and using the line broadening measurements (FWHM) of the most intense peak. The obtained value was 12.8 nm, which was similar to the particle size values observed by TEM (Figure 2(a)). This suggests that the magnetite nanoparticles are monocrystalline.

TEM image shows that spherical particles with a narrow particle distribution (16 [+ or -] 4 nm) were obtained, and because of their size and greater reactivity, the nanoparticles form agglomerates between 50 and 80 nm. Figures 2(b) and 2(c) show TEM images of the functionalized nanoparticles with silica shell and double shell silica-aminosilane. The nanoparticles were obtained with silica shell agglomerated with a coating thickness of 2.9 [+ or -] 0.2 nm; however, when double shell silica-aminosilane was obtained, particles distributed between 100-200 nm with polymagnetic cores and the coating thickness increased to 5.8 [+ or -] 0.8 nm.

Hysteresis loops of the magnetite nanoparticles are shown in Figure 3. Magnetite with and without coated material shows a superparamagnetic behavior that is desirable for biomedical applications. Magnetite has saturation magnetization (Ms) of 55.9emu/g; this value decreases by 14% when magnetite is coated with a silica shell, 28.6% with an aminosilane shell, and 23% with a double shell. The decrease in the magnetization was due to the presence of the coating material. This property indicates the statistical average of the magnetic moments in the direction of the external magnetic field. In this case, there are two materials, but only magnetite nanoparticles are ferromagnetic material and this property is divided by the total mass of the material (magnetite nanoparticles + coated material) [17]. According to Das et al., 40 emu/g is enough to easily and quickly manipulate the nanoparticles in the presence of an external magnetic field in a body [12]. The superparamagnetic condition is not influenced by agglomeration because each particle has its own magnetic moment; according to Cullity and Graham, this property depends on the particle size [18].

Functionalized magnetite with silica was confirmed by FTIR analysis. Figure 4 shows the characteristic adsorption band at 586 [cm.sup.-1] due to the ([Fe.sub.tetra]-O) stretching vibrations of the magnetite. When these particles are coated with silica, the FTIR spectra showed a newband at 1090 [cm.sup.-1] due to the presence of silanol group [13]; this band was present when the particles were coated with both silica (MS) and double shell silica-aminosilane (MSA). In aminosilane coating samples, bands at 3309 and at 1654 [cm.sup.-1] were observed, which are attributed to the presence of amine group (-N[H.sub.2]) [14, 15]. The band observed at 2943 [cm.sup.-1] is due to the stretching of C-H of the methyl group (-C[H.sub.2], -C[H.sub.3]). The suggested mechanism of coated particles is shown in Figure 5. In the magnetite-aminosilane shell, the silicon is bonded with the iron through the deprotonation of magnetite. However, when a silica shell is added before the aminosilane groups, the silicon is bonded in the same way with the magnetite and with aminosilane through S-O-S bond, and the resulting band appeared at 804 [cm.sup.-1]. According to these results, magnetite nanoparticles coated with silica have silanol functional group on the surface and magnetite with aminosilane and double shell (silica-aminosilane) has the amine group functional on the nanoparticle surface, and the difference between these two samples lies in the length of the polymeric chain. The surface-modified superparamagnetic nanoparticles are biodegradable and some studies have showed that biodegradation time depends on the kind of coating used in the magnetite nanoparticle. In previous studies, these nanostructures showed 2% of degradation in a physiological fluid at 18 hours [19]. However, still it is necessary to study the maximum lifetime in a living system.

Figure 6 showed the 5'-nucleotidase immobilization rates using different functionalized magnetite nanoparticles. Clearly, it can be observed that the double shell silica-aminosilane magnetite (MSA) has greater enzymatic adherence than magnetite (M) and silica shell magnetite (MS). This characteristic depends on the type of functional group attached and the length of the polymer chain of the coating material. For this reason, two types of antibodies against 5,-nucleotidase were attached to MSA nanoparticles: anti-CD73 monoclonal antibody (MSA-CD73 sample) and single chain fragment Fv monoclonal antibody (MSA-ScFvsample). When an antibody-coated magnetite is used, the immobilization rates were 0.365 and 0.465 ([micro][g.sub.5eNT]/mgNPs) with anti-CD73 and ScFv antibody, respectively. These values were found to be lower than the polymeric-coated nanoparticles values (MSA; 0.5382 [micro][g.sub.5eNT]/mgNPs). This can be explained due to the underlying differences in the way in which the enzymes are bound to the material. In the antibody-coated magnetite (MSA-CD73; MSA-ScFv), the immobilization is given by the antibody-antigen binding. The surface of the antibody molecule formed by the juxtaposition of the complementarity-determining regions or CDRs of the heavy and light chains creates the site to which the antibody binds to the amino group of the antigen [20]. Fragments are the minimal portions of an antibody that maintains the antigen-combining site. Increased immobilization using fragments maybe due to the small size. Takashi demonstrated that antibody fragments had a better distribution in the tumor, penetrating in less time than complete antibodies [21].

The nanoparticles containing attached antibodies (MSA-ScFv or MSA-CD73) bind to the enzyme through antibody-antigen coupling. Since the antibodies are covalently coupled to antigen, the resulting bond is stronger and more selective [22], and hence, the antibody-attached magnetite nanoparticles showed higher bioselectivity.

In the case of polymeric coated magnetite, enzyme binds to the external layer by adsorption mechanism. Intermolecular forces, surface, hydrophobicity, and ion electrostatic interaction alter the protein adsorption [23]. In these nanoparticles, the enzyme is accumulated to the surface forming a layer onto functionalized nanoparticles, so differences in the surface of the nanoparticles make the difference in protein adsorption. Magnetite nanoparticles coated with silica have silanol functional group on the surface and magnetite with aminosilane and double shell (silica-aminosilane) has the amine group functional on the nanoparticle surface. The difference in electrostatic interaction makes MSA, with an amine group, more affinity to the protein. Another aspect that increases the immobilization is the difference in the length of the polymeric chain; MSA has the largest chain according to the suggested mechanism of coated magnetite nanoparticles (Figure 5).

Figure 7 shows the ScFv antibody interaction with different enzymes, bovine serum albumin (BSA), ovalbumin (OVA), and a negative control (CN; without enzyme). The results showed that there was no interaction in the negative control because of the absence of enzymes. The immobilization of 5'-nucleotidase (5eNT) was better than the immobilization of other enzymes due to the antibody-antigen interaction. Therefore, the use of antibodies onto functionalized nanoparticles resulted in the greater selectivity during the immobilization of enzymes.

4. Conclusions

Antibody-coated magnetite nanoparticles for immobilization of 5'-nucleotidase were developed. The enzyme immobilization grade depends on the type of functional group used and the length of the polymer chain of the coating material. In this study, amine functional group showed higher affinity than silanol functional group. The adherence of 5'-nucleotidase enzyme improved on increasing the polymeric chain length of the coating material. This shows that the magnetite nanoparticles with a double shell (silica-aminosilane) are more sensitive than magnetite with a single shell in the detection of biomarkers, but when antibody-coated nanoparticles are used, the enzyme immobilizationbecomes more selective. 10.1155/2014/978284

Conflict of Interests

The authors declare that there is no conflict of interests regarding the publication of this paper.


[1] V. Varadan, L. Chen, and J. Sie, Nanomedicine: Design and Applications of Magnetic Nanomaterials, Nanosensors and Nanosystems, Wuey-VCH, Weinheim, Germany, 2008.

[2] G. A. O. Jinhao, G. U. Hongwei, and X. U. Bing, "Multifunctional magnetic nanoparticles: design, synthesis, and biomedical applications," Accounts of Chemical Research, vol. 42, no. 8, pp. 1097-1107, 2009.

[3] Q. A. Pankhurst, J. Connolly, S. K. Jones, and J. Dobson, "Applications of magnetic nanoparticles in biomedicine," Journal of Physics D, vol. 36, no. 13, pp. R167-R181, 2003.

[4] R. Cornell and U. Schwertmann, The Iron Oxides: Structure, Properties, Reactions, Occurrences and Uses, Wiley-VCH, Weinheim, Germany, 2003.

[5] D.-M. Fan, H.-R. Shi, Z.-M. Chen, Q.-H. Wu, H.-N. Liu, and R.-T. Zhang, "Early detection of ovarian carcinoma by proteome rofiling based on magnetic bead separation and atrix-assisted laser desorption/ionization time of flight mass spectrometry," African Journal of Microbiology Research, vol. 4, no. 10, pp. 940-951, 2010.

[6] A. Figuerola, R. Di Corato, L. Manna, and T. Pellegrino, "From iron oxide nanoparticles towards advanced iron-based inorganic materials designed for biomedical applications," Pharmacological Research, vol. 62, no. 2, pp. 126-143, 2010.

[7] A. Jordan, R. Scholz, P. Wust, H. Fahling, and R. Felix, "Magnetic fluid hyperthermia (MFH): cancer treatment with AC magnetic field induced excitation of biocompatible superparamagnetic nanoparticles," Journal of Magnetism and Magnetic Materials, vol. 201, no. 1-3, pp. 413-419, 1999.

[8] K. Eunkyung, L. Sanghwa, J. Aram et al., "A single-molecule dissection of ligand binding to a protein with intrinsic dynamics," Nature Chemical Biology, vol. 9, pp. 313-318, 2013.

[9] J.-H. Park, K.-H. Im, S.-H. Lee et al., "Preparation and characterization of magnetic chitosan particles for hyperthermia application," Journal of Magnetism and Magnetic Materials, vol. 293, no. 1, pp. 328-333, 2005.

[10] S. Dandamudi and R. B. Campbell, "The drug loading, cytotoxicty and tumor vascular targeting characteristics of magnetite in magnetic drug targeting," Biomaterials, vol. 28, no. 31, pp. 4673-4683, 2007.

[11] R. T. Reza, C. M. Perez, A. M. Martinez, D. B. Baques, and P. Garcia-Casillas, "Study of the particle size effect on the magnetic separation of bovine serum albumin (BSA)," Sensor Letters, vol. 8, no. 3, pp. 476-481, 2010.

[12] M. Das, D. Mishra, T. K. Maiti, A. Basak, and P. Pramanik, "Bio-functionalization of magnetite nanoparticles using an aminophosphonic acid coupling agent: new, ultradispersed, iron-oxide folate nanoconjugates for cancer-specific targeting," Nanotechnology, vol. 41, no. 19, Article ID 415101, 2008.

[13] A. del Campo, T. Sena, J. Lellouchec, and J. Bruce, "Multifunctional magnetite and silica-magnetite nanoparticles: synthesis, surface activation and applications in life sciences," Journal of Magnetism and Magnetic Materials, vol. 293, no. 1, pp. 33-40, 2005.

[14] H. Zimmermann, "5'-Nucleotidase: molecular structure and functional aspects," Biochemical Journal, vol. 285, part 2, pp. 345-365,1992.

[15] F. Pagani and M. Panteghini, "5'-Nucleotidase in the detection of increased activity of the liver form of alkaline phosphatase in serum," Clinical Chemistry, vol. 47, no. 11, pp. 2046-2048, 2001.

[16] A. Martinez Martinez, C. Flores-Flores, F. J. Campo, E. Muuoz-Delgado, C. Fini, and C. J. Vidadl, "Biochemical properties of 5; -nucleotidase from mouse skeletal muscle," Biochimica et Biophysica Acta: Protein Structure and Molecular Enzymology, vol. 1386, no. 1, pp. 16-28, 1998.

[17] B. Buschow, Physics of Magnetism and Magnetic Materials, Kluwer Academic, Germany, 2004.

[18] B. D. Cullity and C. D. Graham, Introduction to Magnetic Materials, John Wiley & Sons, New York, NY, USA, 2009.

[19] K. I. Baca Ramos, C. A. Martinez Perez, C. A. R. Gonzalez et al., Stability of Functionalized Magnetic Particles in a Physiologic Fluid, vol. 1 of NSTI-Nanotech, 2012.

[20] C. A. Janeway, P. Travers, and M. Walport, Immunobiology: The Immune System in Health and Disease. Part II. The Recognition of Antigen, Garland Science, New York, NY, USA, 2001.

[21] T. Yokota, D. E. Milenic, M. Whitlow, and J. Schlom, "Rapid tumor penetration of a single-chain Fv and comparison with other immunoglobulin forms," Cancer Research, vol. 52, no. 12, pp. 3402-3408, 1992.

[22] S. Nandimi, Immunology: Introductory Textbook, New Age International, USA, 2005.

[23] I. Lundstroam, "Models of protein adsorption on solid surfaces," in Surfactants, Adsorption, Surface Spectroscopy and Disperse Systems, pp. 76-82, 1985.

Christian Chapa Gonzalez, Carlos A. Martinez Perez, Alejandro Martinez Martinez, Imelda Olivas Armendariz, Oscar Zavala Tapia, Adriana Martel-Estrada, and Perla E. Garcia-Casillas

Universidad Autonoma de Ciudad Juarez, Instituto de Ingenieria y Tecnologia, Avenida del Charro 610 Norte, Colonia Partido Romero, 32315 Ciudad Juarez, CHIH, Mexico

Correspondence should be addressed to Perla E. Garcia-Casillas;

Received 2 September 2013; Accepted 21 January 2014; Published 26 March 2014

Academic Editor: Chih-Hung Hsiao
COPYRIGHT 2014 Hindawi Limited
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2014 Gale, Cengage Learning. All rights reserved.

Article Details
Printer friendly Cite/link Email Feedback
Title Annotation:Research Article
Author:Gonzalez, Christian Chapa; Perez, Carlos A. Martinez; Martinez, Alejandro Martinez; Armendariz, Imel
Publication:Journal of Nanomaterials
Date:Jan 1, 2014
Previous Article:Effect of process parameters of CNT containing friction powder on flexural properties and friction performance of organic brake friction materials.
Next Article:Fractional contributions of defect-originated photoluminescence from CuIn[S.sub.2]/ZnS coreshells for hybrid white LEDs.

Terms of use | Privacy policy | Copyright © 2020 Farlex, Inc. | Feedback | For webmasters