Printer Friendly

Data reacquisition vs. data restoration: a new model for business continuity.

For more than 30 years, the backup of fixed disk has been the primary mode of data protection and business continuity. More recently, IT managers have come to recognize that the backup process is important, but that the more pressing issue is data restoration, which is critical when a problem occurs. The need to restore files can be as simple as a single file that was inadvertently deleted by a user from primary disk storage to a catastrophic site disaster on the scale of the destruction of the World Trade Center towers. Whatever the scope of the problem, the traditional approach to file restoration can have a major impact on business continuity.

This recognition of the importance of data restoration has now made the restore window, not the backup window, the primary concern in designing a disaster recovery and business continuity architecture. In effect, the restore window equates to downtime, which can cripple or kill a business in very short order.

The devastating impact of downtime has spurred businesses with unique high availability requirements to deploy active-active server configurations with redundant hardware running in hot or warm failover modes. In this configuration, all data is mirrored between the two servers so if the primary system fails, the standby system will take control with immediate access to data. This type of configuration effectively reduces the restore window to zero by providing an active full file copy of the data set. Unfortunately, these ultimate uptime configurations are beyond the means of most businesses.

With the advent of affordable disk-based backup solutions, the concept of full file format has become significantly more important. The combination of D2D backup arrays using full file format--instead of traditional methods of writing backup data--offers IT managers a dramatic improvement in maintaining business continuity and effectively eliminating the issue of data restoration altogether in favor of a new data protection model: data reacquisition.

The concept of data reacquisition leverages the random access functionality of disk-based backup and writes the backup data in full file format--the same format as the primary disk storage--so that the backup data copy can be immediately accessed without the need for a time-consuming restoration process.

The data reacquisition model is a radical change from traditional backup and restore technologies built around linear storage devices--tape, CD, MO and DVD--that read data sequentially and utilize proprietary file formats, meaning that the backup data files must be restored to disk before they can be accessed by network users.

While the time-to-restore penalty imposed by tape-based backup and other linear secondary storage systems is well known, the full file format functionality is an even more important differentiator in establishing the ability of a backup system to enable users to quickly and easily reacquire data instead of the protracted downtime imposed by traditional data restoration processes.

Amazingly, some vendors of D2D backup systems have opted to discard the advantages of disk-based backup by making the disk systems emulate tape drives, including the use of proprietary data formats. The justification for this approach is that it allows the D2D system to be easily integrated into an organization's existing backup framework: the backup software views the D2D array as just another tape library so the unit can be easily integrated. No changes are required to the current backup software environment, backup performance is improved compared to tape-based backup, and the D2D backup device often provides some level of rapid file restore or recovery compared to tape.

However, achieving these modest improvements creates a huge problem when there is a data loss incident and critical files need to be restored as soon as possible.

Even with "rapid" file recovery features, any backup system that does not utilize full file format must restore the files to disk before they can be accessed by network users. In the case of a hardware failure, the restoration process from the backup device can only start when the faulty hardware has been replaced and the server is up and running again. The time to restore data from tape to primary disk typically takes several hours. That performance can be improved with a disk-based backup device, even one that uses a proprietary format to write data sequentially. However, the time required for the tape-to-disk or disk-to-disk file copy operations is only one component of the overall time to restore. You also must factor in the time it takes to notify an IT administrator of the failure, the time to isolate the failed component(s), the time to acquire and install a replacement, the time to re-boot and re-load system software and set parameters and privileges on the server. Only then can the actual file restoration process begin.

Any solution that can take half a day or more to provide access to critical data is becoming increasingly unacceptable to enterprise IT environments that are focused on data availability and business continuity. The simple reality is that no solution that relies on a 30-year old data recovery model can meet the needs of the typical 24X7X365 environment. To address the current business continuance demands, a new data availability and file recovery model is needed.

Deploying cost-correct ATA-based disk backup in full file format mode satisfies the need for fast access to data in the event of a failure that interrupts access to primary storage. Because the files on the ATA storage are already in a full file format and readable by any authorized user, this D2D backup model enables application path redirect. If access to primary storage fails, the path redirect operations simply points the application--such as Oracle, SQL or any other large database or similar application--to the D2D backup device as the new file storage location. The redirect can be either automatic or manual. Some large-scale storage systems provide dynamic multipathing capability, which performs an automatic application path redirect when it detects problems with the primary storage. Another option (as with Nexsan's D2D solutions) is to have automation software that would automatically call a text messaging system and notify an administrator that the primary storage has failed. The administrator can then go online and with terminal access into the network can perform a manual path redirect. The approach gives the IT administrators the ability to monitor and maintain business continuity from anywhere they have terminal access to the network--whether from across the hall, across the country or around the world. Once the redirect is completed, network users achieve immediate reacquisition of all their files. In some cases the "data reacquisition" model can minimize downtime to sub-two minutes, but in most cases this all occurs very easily in less than 15 minutes.

Deploying a D2D backup system using full file format eliminates the need to do an immediate restore, with administrators trying to recover files in a panic situation. That does not mean, however, that this backup configuration is never used to restore data. While the application path redirect provides fast access to data files, the D2D backup device will not provide the same level of performance as the primary storage server. It simply provides continuous access while the main storage is repaired or replaced. Once those repairs are made, data files are restored from the D2D backup device to primary disk. A major advantage of the D2D-reacquisition model is that user access to data is not interrupted while the restore process is underway. The D2D array simultaneously provides uninterrupted access to files while restoring those same files to primary storage.

Just as a variety of new technologies--advanced data replication techniques, snapshots, server-less backup--made the concept of a backup window largely obsolete, D2D-based data reacquisition is doing the same to the conventional data restoration processes. This new D2D business continuity model enables enterprises to immediately reacquire data and get users back online and then, under a controlled condition, repair and bring the original hardware back online. During this entire process, customers, employees and end users are accessing their data rather than waiting for hours, as required with conventional data restoration techniques. The downtime savings from just a single incident make a D2D data reacquisition solution one of the most intelligent purchases an organization can make.

Diamond Lauffin is executive vice president at Nexsan Technologies (Woodland Hills, CA)

www.nexsan.com
COPYRIGHT 2003 West World Productions, Inc.
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2003, Gale Group. All rights reserved. Gale Group is a Thomson Corporation Company.

Article Details
Printer friendly Cite/link Email Feedback
Title Annotation:Backup/Restore
Author:Lauffin, Diamond
Publication:Computer Technology Review
Date:Nov 1, 2003
Words:1370
Previous Article:UDO: why professional optical storage makes sense in a low-cost disk world.
Next Article:Backup storage appliances come of age.


Related Articles
Backup & recovery: the killer app for ASPs. (ASPs).
RELIATY INTROS FIRST DATA PROTECTION SOFTWARE FOUNDED ON NDMP.
Quantum makes enhanced backup real. (First in/First out).
Tape pipeline for BC/DR planning: new considerations in backup and recovery. (Storage Networking).
Disk-to-disk backup: pass the data please. (Tape/Disk/Optical Storage).
Data management.
Data grid disaster puts SMBs at most risk.
IP SANs to the rescue: fortifying business continuity.
Preparing for disaster with an effective business continuity strategy: overcoming potential dangers to your information infrastructure.
Recover Pro software 6.

Terms of use | Privacy policy | Copyright © 2018 Farlex, Inc. | Feedback | For webmasters