Printer Friendly

DURR NDT Enabling Safe and Efficient On-Stream Pipeline Inspection with Computed Radiography.

Bietigheim-Bissingen, Germany, March 13, 2018 --( Mozzat Enterprise Sdn Bhd (MESB), located in Brunei with around 200 employees, provides a wide range of NDT on-stream inspection services to the local oil and gas industry, primarily to Brunei Shell Petroleum, as well as to other companies in the surrounding region. MESB has various certifications, including ISO 9001, ISO 14001, BS OHSAS 18001 and was the first local company in Brunei to achieve ISO/IEC 17020 certification from ANSI-ASQ National Accreditation Board (ANAB) in the United States.

MESB has been using the DURR NDT HD-CR 35 NDT scanner since 2014 for corrosion monitoring and during this time has processed more than 5000 images with the system.

For this particular application, after the imaging plates are exposed offshore using an Iridium-192 isotope source, they are brought back to the MESB main office where they are scanned by the HD-CR 35 NDT and then interpreted by one of several operators trained to use the system. MESB uses DURR NDT's high sensitivity white imaging plates (CR-IP) and encourages proper handling practices among its team members: "In the three years we have used this CR system, not one single imaging plate has been damaged. One of the main reasons is that we encourage the use of single-use envelopes in order to protect the imaging plates. Furthermore, each member of our 5-person radiography testing crew is only issued with a certain amount of imaging plates which they cannot swap and are then their responsibility to take care of. By doing this we are able to use each imaging plate more than 1000 times," explains B.C. Mohan, Contract Manager at MESB.

MESB also relies on the automatic wall thickness measurement tool in the DURR NDT D-Tect software to perform their pipeline corrosion monitoring tasks. After performing an internal study using ultrasonic methods as a reference, MESB found that the wall thickness measurements produced by the D-Tect automa-ted software tool matched closely to the reference thickness values (< 5 % difference) - thus giving operators the confidence to make correct evaluations. According to B.C. Mohan, "automated analysis increases the reliability of wall thickness measurement which allows fit-for-purpose (FFP) assessments to be conducted more accurately."

Previously, a large issue MESB experienced was the amount of time required for reshoots - with conventional radiography they found that at least 15 to 20 % of images needed to be reshot due to poor image quality or under/over-exposure. After the introduction of the HD-CR 35 NDT, the number of reshoots required dropped to less than 1 %. "Since the HD-CR 35 NDT has enormously decreased reshoots, computed radiography has become widely accepted by the Brunei oil and gas industry for on-stream inspections at offshore facilities," commented B.C. Mohan.

Due to the high demand for radiographic inspection of pipelines in the region, the HD-CR 35 NDT investment payback period for MESB was only one year. MESB is also fully supported by Singapore-based NDT Instruments Pte Ltd who performs annual maintenance and any other required service activities ensuring the system has minimal downtime.

Contact Information:


Adrian Roth

+49 7142 99381-0

Contact via Email

Read the full story here:
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2018 Gale, Cengage Learning. All rights reserved.

Article Details
Printer friendly Cite/link Email Feedback (Press Releases)
Geographic Code:9BRUN
Date:Mar 13, 2018
Previous Article:Brilliant Results for Industrial X-Ray Film Processing with DURR NDT X-Ray Chemicals.
Next Article:"Healthy Carpets" Company Celebrates 13th Anniversary with Special Offers.

Terms of use | Privacy policy | Copyright © 2020 Farlex, Inc. | Feedback | For webmasters